Enhanced photoelectric properties of PbSnSe thin films via quick oxygen ion-implantation sensitization

Journal of Materials Science - Although chalcogenide materials continue to generate considerable interest due to great potentials for various optoelectronic devices, annealing for a long time in...     

Impact of gypsum on flotation of scheelite and fluorite using sodium oleate as collector

ABSTRACT

In this study, effect of calcium and gypsum on scheelite and fluorite was investigated using sodium oleate as collector. Micro-flotation and contact angle results showed that the adsorption of calcium could inhibit the hydrophobicity of scheelite and fluorite. Moreover, sulfate could enhance the inhibition. FT-IR results showed that calcium could be priori precipitated into calcium oleate and adsorb on mineral surface. The adsorption of calcium could increase the scheelite potential to IEP, while it showed limited effect on fluorite potential. However, the interaction of calcium on scheelite and fluorite in gypsum solution was more complex than that in calcium solution.     

Microstructure and damage evolution of SiCf/PyC/SiC and SiCf/BN/SiC mini-composites: A synchrotron X-ray computed microtomography study

SiC_f/PyC/SiC and SiC_f/BN/SiC mini-composites comprising single tow SiC fibre-reinforced SiC with chemical vapor deposited PyC or BN interface layers are fabricated. The microstructure evolutions of the mini-composite samples as the oxidation temperature increases (oxidation at 1000, 1200, 1400, and 1600?°C in air for 2?h) are observed by scanning electron microscopy, energy dispersive spectrometry, and X-ray diffraction characterization methods. The damage evolution for each component of the as-fabricated SiC_f/SiC composites (SiC fibre, PyC/BN interface, SiC matrix, and mesophase) is mapped as a three-dimensional (3D) image and quantified with X-ray computed tomography. The mechanical performance of the composites is investigated via tensile tests.The results reveal that tensile failure occurs after the delamination and fibre pull-out in the SiC_f/PyC/SiC composites due to the volatilization of the PyC interface at high temperatures in the air environment. Meanwhile, the gaps between the fibres and matrix lead to rapid oxidation and crack propagation from the SiC matrix to SiC fibre, resulting in the failure of the SiC_f/PyC/SiC composites as the oxidation temperature increases to 1600?°C. On the other hand, the oxidation products of B₂O₃ molten compounds (reacted from the BN interface) fill up the fracture, cracks, and voids in the SiC matrix, providing excellent strength retention at elevated oxidation temperatures. Moreover, under the protection of B₂O₃, the SiC_f/BN/SiC mini-composites show a nearly intact microstructure of the SiC fibre, a low void growth rate from the matrix to fibre, and inhibition of new void formation and the SiO₂ grain growth from room to high temperatures. This work provides guidance for predicting the service life of SiC_f/PyC/SiC and SiC_f/BN/SiC composite materials, and is fundamental for establishing multiscale damage models on a local scale.     

Large increase of Curie temperature in (110)-oriented La0.7Sr0.3MnO3 films

From the perspectives of scientific researches and practical applications, it is desirable to explore high operating temperature ferromagnetic films. The effect of biaxial strain on magnetic properties of (110)-oriented La_0.7Sr_0.3MnO₃ films was studied. High quality La_0.7Sr_0.3MnO₃ films were grown on (110)-oriented perovskite single crystal substrates using pulsed laser deposition, varying substrate-induced misfit strains from ??2.27–0.75%. A remarkable enhancement of Curie temperature has been achieved for (110)-oriented La_0.7Sr_0.3MnO₃ films clamped with small misfit strains (i.e., grown on LAST (110)). The enhanced Curie temperature of (110)-oriented La_0.7Sr_0.3MnO₃ films could be attributed to the misfit strain between the films and the underlying substrates and may have technological implication for applications at high temperature environments.     

Structure-permeation relations of met-enkephalin peptide analogues on absorption and secretion mechanisms in Caco-2 monolayers

Due to the low effective permeabilities of peptides at many absorption sites, their structure-permeation relations are of high interest. In this work structure-permeation relations of Met-enkephalin analogues are presented using confluent Caco-2 cells as an in vitro permeation model. Four model peptides (Met-enkephalin, [D-Ala2]Met-enkephalin, [D-Ala2]Met-enkephalinamide, and metkephamid) were tested in terms of permeability, lipophilicity, charge, and molecular size. Permeability coefficients (P(eff)) across Caco-2 cells were low, 3.3 x 10(-8) to 9.5 x 10(-8) cm s-1, and were similar to typical paracellular markers. No correlation of permeability and the log(apparent octanol/buffer partition coefficient) was observed. A 40-fold increase of the permeability of metkephamid in the presence of 10 mM EDTA suggested a significant contribution of paracellular transport. Independent support for this conclusion was obtained by visualizing the pathway of the fluorescein isocyanate isomer I 1-metkephamid by confocal laser scanning microscopy (CLSM). The fluorophore-labeled peptide was observed in the intercallular space only. Metkephamid permeabilities were found to be direction-specific. Permeabilities from basolateral to apical (b-to-a) were significantly higher (ca. 4-fold) than in the opposite (a-to-b) direction. The addition of verapamil equalized the permeabilities in the a-to-b and b-to-a directions, suggesting the involvement of a P-glycoprotein-mediated secretion mechanism. Similar observations were obtained with [D-Ala2]Met-enkephalinamide, but not with Met-enkephalin and [D-Ala2]Met-enkephalin. In contrast to the other analogues, metkephamid and [D-Ala2]Met-enkephalinamide are positively charged at neutral pH, as demonstrated by their isoelectric points (pl = 8.6 for [D-Ala2]Met-enkephalinamide and metkephamid and 5.3 for [D-Ala2]Met-enkephalin and Met-enkephalin). The data is in agreement with the literature showing that most compounds secreted by the P-glycoprotein transporter carry a positive charge.     

iShopFloor: an Internet-enabled agent-based intelligent shop floor

Global competition is driving manufacturing companies to change the way they do business. New kinds of shop floor control systems need to be implemented for these companies to respond quickly to changing shop floor environments and customer demands. This paper presents a new concept called iShopFloor-an intelligent shop floor based on the Internet, web, and agent technologies. It focuses on the implementation of distributed intelligence in the manufacturing shop floor. The proposed approach provides the framework for components of a complex control system to work together as a whole rather than as a disjoint set. It encompasses both information architecture and integration methodologies. The paper introduces the basic concept of iShopFloor, a generic system architecture, and system components. It also describes the implementation of eXtensible Markup Language message services in iShopFloor and the application of intelligent agents to distributed manufacturing scheduling. A prototype environment is presented, and some implementation issues are discussed.     

手工水饺定量给馅机的设计

手工水饺定量给馅机解决了包制手工水饺的定量给馅问题，保持每个水饺的重量一致稳定。该机采用柱塞泵给馅，气动传动，自动化，高效率，适合工业化生产手工水饺使用。