The effect of alkali metal oxide on the properties of borosilicate fireproof glass: Structure,thermal properties,viscosity, chemical stability

The purpose of the current work was to research the effect of alkali metal oxide on the structure, thermal properties, viscosity and chemical stability in the glass system (R₂O–CaO–B₂O₃–SiO₂) systematically. Because the glass would emulsify when Li₂O was added to the glass batch, this article did not discuss Li₂O. The results showed that when the amount of Na₂O was less than 4 mol.%, there was a higher interconnectivity of borate and silicate sub-networks in glass, as more mixed Si–O–B bonds were present in glass. The glass samples exhibited excellent thermal properties and chemical stabilities. As the amount of Na₂O exceeded 4 mol.%, the interconnectivity of borate and silicate sub-networks was weakened. The thermal properties and chemical stabilities of the glass samples were reduced. The connectivity of the silicate sub-network was weakened slightly as the Na/K ratio varied, and the coefficient of thermal expansion (CTE) of the glass samples gradually increased, and the resistance to thermal shock (RTS) value gradually decreased. Moreover, the viscosity of the glass samples decreased with the ratio of Na/Si and Na/K increased.     

喇曼自由电子激光器辐射谱的测量

本文报道了利用微波栅摄谱仪测量在超辐射工作条件下的喇曼自由电子激光器辐射谱的初步结果。观察到了毫米波自由电子激光器的调谐特性。实验结果表明,辐射谱的中心频率随波荡场强度的增加而减小,这与考虑波导模影响的集体制式自由电子激光的有关理论预言相符。     

秦皇岛发电有限责任公司年产2.5亿块粉煤灰烧结砖生产线项目工艺设计特点

1 项目建设的目的 秦皇岛发电有限责任公司原名秦皇岛热电厂,目前是一座装机容量100万千瓦的国有大型火力发电企业,年发电量68亿kWh.由于三期工程正在筹建,拟建2×30万kW供热发电机组.为了合理地利用三期工程排放的粉煤灰,不再新建储灰场污染环境,秦皇岛发电有限责任公司经过国内外详细考察,反复论证,认为最有效的大量利用途径之一是用其烧制粉煤灰烧结砖这种新型墙体材料.考虑到国内设备生产能力及粉煤灰掺量难以满足要求,因此,决定引进具有国际先进水平的设备.通过更换模具和改变原料配比,能生产高档清水砖、空心砖、不同规格与不同孔洞率的保温、承重与非承重砌块.     

原料对铁合金冶炼过程的影响

介绍了铁合金冶炼时需要准备的原料，对不合格原料需要进行加工处理，达到合格粒度。并提出了影响铁合金冶炼过程有原料的粒度，配料称量，混合等重要因素。     

电镀锡机组软熔导电辊脱锡技术研究

粘锡是电镀锡机组软熔导电辊失效的主要原因,应用化学方法脱锡是延长导电辊寿命的重要途径.开发了氢氧化钠(钾)为主要组成,并加入适量亚铅酸钠(钾)和硝酸(亚硝酸)钠配制而成脱锡剂,当脱锡剂温度为40～80℃,导电辊表面温度为40～70℃时,对粘锡导电辊具有很好的脱锡效果.粘锡导电辊脱锡后的表面粗糙度可以恢复到4.0μm以上,导电辊使用寿命提高80%,降低导电辊修复成本90%,并大幅度减少导电辊更换时间,提高电镀锡机组生产作业率.     

《自动控制原理》课程中闭环脉冲传递函数算法研究

针对一般方法推导离散系统闭环脉冲传递函数过程繁琐费时的问题,给出一种先连续化求出闭环传递函数再离散化求解的简便方法,并给出使用本方法的单一化条件。对于满足该条件的系统,可直接求用简便方法求取系统的闭环脉冲传递函数,不满足该使用条件的系统,对其中间变量的求取可使用本方法,因而大大简化求解闭环脉冲传递函数的过程,为采样控制系统的分析和设计提供了很大的方便。     

高固含量丙烯酸酯乳液压敏胶的制备及性能

以丙烯酸丁酯(BA)、甲基丙烯酸甲酯(MMA)、丙烯酸(AA)、丙烯酸羟乙酯(HEA)为共聚单体,以烯丙氧基脂肪醇聚氧乙烯醚硫酸铵(SR-10)和烷基聚氧乙烯醚琥珀酸单酯磺酸二钠(A-102)作为环保型复合乳化剂,通过无种子半连续乳液聚合工艺制备了固含量高达62％的丙烯酸酯乳液压敏胶.考察了硬单体MMA用量对乳液压敏胶性能的影响.结果表明,当MMA用量为10％(以单体总质量计,下同)时,高固含量丙烯酸酯乳液压敏胶玻璃化转变温度(Tg)为–32.6℃,初始热分解温度为337℃,水接触角为108°,环形初粘力为(9.53±0.389)N/25 mm,180°剥离强度为(10.08±0.056)N/25 mm,持粘力超过72 h;与未添加MMA的高固含量乳液相比,添加10％MMA后乳液黏度从361 mPa·s降至155 mPa·s,平均粒径从375 nm降至350 nm,粒径分布指数(PDI)从0.144增至0.214.     

6,7-二氨基-2-(2′,4′-二甲基)苯基-1H-苯并[de]异喹啉-1,3(2H)-二酮的合成

苊经发烟硝酸硝化，稀硝酸氧化得到６，７－二硝基－１Ｈ，３Ｈ－萘并［１，８－ｃｄ］吡喃－１，３－二酮，它与２，４－二甲基苯胺缩合后用氯化亚锡还原得到６，７－二氨基－２－（２′，４′－二甲基）苯基－１Ｈ－苯并［ｄｅ］异喹啉－１，３（２Ｈ）－二酮。与６－氨基－２－（２′，４′－二甲基）苯基－１Ｈ－苯并［ｄｅ］异喹啉－１，３（２Ｈ）－二酮（Ｃ．Ｉ．溶剂黄４４，或Ｃ．Ｉ．分散黄１１）相比，其在ＤＭＦ中的最大吸收波长红移了１７．６ｎｍ，最大荧光波长蓝移了４２．７ｎｍ，荧光量子产率有所增大。     

Controllable synthesis of poly(N-vinylpyrrolidone) and its block copolymers by atom transfer radical polymerization

At room temperature atom transfer radical polymerization (ATRP) of N-vinylpyrrolidone (NVP) was carried out using 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetra-azacyclo-tetradecane (Me₆Cyclam) as ligand in 1,4-dioxane/isopropanol mixture. Methyl 2-chloropropionate (MCP) and copper(I) chloride were used as initiator and catalyst, respectively. The polymerization of NVP via ATRP could be mediated by the addition of CuCl₂. The resultant poly(N-vinylpyrrolidone) (PNVP) has high conversion of up to 65% in 3 h, a controlled molecular weight close to the theoretical values and narrow molecular weight distribution between 1.2 and 1.3. The living nature of the ATRP for NVP was confirmed by the experiments of PNVP chain extension. With PNVP-Cl as macroinitiator and N-methacryloyl-N′-(α-naphthyl)thiourea (MANTU) as a hydrophobic monomer, novel fluorescent amphiphilic copolymers poly(N-vinylpyrrolidone)-b-poly(N-methacryloyl-N′-(α-naphthyl)thiourea) (PNVP-b-PMANTU) were synthesized by ATRP. PNVP-b-PMANTU copolymers were characterized by ¹H NMR, GPC-MALLS and fluorescence measurements. The results revealed that PNVP-b-PMANTU presented a blocky architecture.