Microfabricated Lamb wave device based on PZT sol-gel thin film formechanical transport of solid particles and liquids

The fabrication using silicon micromachining and characterization of an acoustic Lamb wave actuator is presented. The intended use of the device is for mass transport and sensor applications. The device consists of dual interdigitated transducers patterned on a thin-film composite membrane of silicon nitride, platinum, and a sol-gel-derived piezoelectric ceramic (PZT) thin film. The acoustic properties of the device are presented along with preliminary applications to mechanical transport and liquid delivery systems. Improved acoustic signals and improved mass transport are achieved with PZT over present Lamb wave devices utilizing ZnO or AlN as the piezoelectric transducer     

Muscle fiber composition and blood ammonia levels after intense exercise in humans

The relationship between fiber type composition and the increase in blood ammonia was examined following a maximal O2 consumption (VO2max) test. Muscle biopsies were taken from the middle portion of the vastus lateralis for determination of fiber type percentages. Two subject groups were selected on the basis of a high (HST) or low (LST) percentage of slow-twitch fibers and compared for blood ammonia and lactate levels after exercise at work loads of approximately 85 and 110% of VO2max. An inverse relationship was found between the percentage of slow-twitch fibers and the increase in blood ammonia. Blood ammonia increased after exercise at both 85 and 110% of VO2max. However, the increase was twofold greater for the LST group following the 110% work effort. The increases in blood ammonia and lactate were positively correlated for both groups following exercise. The results suggest that the proportion of slow-twitch fibers plays an important role in determining the magnitude of the increase in blood ammonia after intense exercise.     

Multifrequency ultrasound transducers for conformal interstitial thermal therapy

Control over the pattern of thermal damage generated by interstitial ultrasound heating applicators can be enhanced by changing the ultrasound frequency during heating. The ability to change transmission frequency from a single transducer through the use of high impedance front layers was investigated in this study. The transmission spectrum of multifrequency transducers was calculated using the KLM equivalent circuit model and verified with experimental measurements on prototype transducers. The addition of a quarter-wavelength thick PZT (unpoled) front layer enabled the transmission of ultrasound at two discrete frequencies, 4.7 and 9.7 MHz, from a transducer with an original resonant frequency of 8.4 MHz. Three frequency transmission at 3.3, 8.4, and 10.8 MHz was possible for a transducer with a half-wavelength thick front layer. Calculations of the predicted thermal lesion size at each transmission frequency indicated that the depth of thermal lesion could be varied by a factor of 1.6 for the quarter-wavelength front layer. Heating experiments performed in excised liver tissue with a dual-frequency applicator confirmed this ability to control the shape of thermal lesions during heating to generate a desired geometry. Practical interstitial Designs that enable the generation of shaped thermal lesions are feasible.     

Comprehensive surface analysis of hydrophobically functionalized SFM tips

Tip-sample interactions have been of interest since the early development of the scanning force microscope. Investigations of interfacial interactions at the molecular level are of importance for fundamental studies of bi-molecular interactions and for possible applications in biomedical research and industrial settings. By engineering the surface chemical properties of the SFM probes, specific force interactions may be measured. However, as these modification schemes become more widely applied, detailed chemical analysis of the modified cantilever surfaces becomes crucial. In this paper, we describe two approaches to coat SFM cantilevers with hydrophobic coatings: a silanization protocol and ratio frequency plasma enhanced chemical vapor deposition.     

Changes in forage quality, ingestive mastication, and digesta kinetics resulting from switchgrass maturity

Five maturities of switchgrass hay harvested at 14-d intervals (vegetative through 20% heading) were fed to Hereford steers (297 kg) in a 5 x 5 Latin square. Relationships with switchgrass maturity were negative and quadratic (P < .05) for DMI and cubic (P < .05) for digestible DMI. Declines in apparent digestibilities of DM, ADF, and cellulose were cubic (P < .05), whereas these were quadratic (P < .05) for NDF, hemicellulose, and CP. Whole masticates from the least, mid, and most mature hays showed linear (P < .05) declines in DM concentration and IVDMD with increasing maturity, whereas NDF concentrations increased linearly (P < .05). Mean retention time of gastrointestinal DM increased linearly (P < .01) from 64 to 94 h from the least to the most mature hay, and the associated rate of passage declined linearly (P < .01) from 3.3 to 2.1%/h. Sieving of masticate DM showed a reduced proportion of large particles (> or = 2.8 mm) and an increased proportion of small particles (< or = .5 mm) with advancing forage maturity. More than 94% of the sieved fecal DM passed a 1.0-mm sieve, but particle sizes showed the same relationship with forage maturity as noted for masticate DM. This occurred despite the comminution from the rumination and digestive processes.     

The subunit structure of alpha-acetohydroxyacid isomeroreductase from Salmonella typhimurium

Alpha-Acetohydroxyacid isomeroreductase from Salmonella typhimurium has a native molecular weight of 220,000. The constituent polypeptide chains exhibit anomalous but unimodal electrophoretic migration on sodium dodecyl sulfate-urea polyacrylamide gels. The subunit molecular weight, determined by sedimentation equilibrium in 6 M guanidine hydrochloride, is 57,000. The apparent tetrameric nature of the native enzyme was confirmed by determining the types of oligomers formed upon cross-linking with dimethylsebacimidate. Analysis of tryptic peptides suggests that the polypeptide chains have an identical amino acid sequence. Carbohydrate analysis, ultraviolet absorption spectrum, and atomic absorption spectrum are consistent with the lack of cobalamine and cobalt. The Michaelis constants are as follows: alpha-acetolactate, 2.9 x 10-4 M; alpha-aceto-alpha-hydroxybutyrate, 7.8 x 10-4 M; NADPH, 1.5 x 10-5 M; Mg2+, 7.7 x 10-4 M. The catalytic constants (molecules of substrate catalyzed per min per molecules of enzyme) for alpha-acetolactate and alpha-aceto-alpha-hydroxybutyrate are 1,100 and 4,700, respectively. Comparative tryptic peptide analysis and immunological analysis show that alpha-acetohydroxyacid isomero-reductase and biosynthetic L-threonine deaminase bear no structural relationship and therefore rule out a "shared structure" hypothesis for the putative involvement of L-threonine deaminase in the synthesis of alpha-acetohydroxyacid isomeroreductase.     

Hierarchies and Space Measures for Pointer Machines

We present two definitions of space complexity for Schönhage′s pointer machine (PM): a uniform measure, mass, and a logarithmic measure, capacity. We consider how each space measure affects the time and space relationships between pointer machines and the more classical models of computation. For example, we show that a Turing machine of space complexity s can be simulated by a pointer machine of mass complexity O(s/log s) in real time. This is an improvement of a result of van Emde Boas. We show that space compression is possible for pointer machines, and we show that the time and space hierarchies for pointer machines are tight. We also present a simulation of an alternating pointer machine of time complexity t by a deterministic pointer machine of mass complexity O(t/log t).     

Hybrid ultrasonic elastic force motors micromachined in silicon

Abstract

A micromotor for low power applications is being developed using silicon micromachining technologies and organometallic PZT films sol-gel deposition. The construction of a hybrid ultrasonic motor suitable for batch fabrication is proposed. A fabrication process for the stator resonator compatible with both bulk micromachining and 0.3 μm PZT films deposition on a SiNx/Ta/Pt substrate has been tested. Comparison of PZT actuated and previously fabricated ZnO actuated diaphragms are performed using laser interferometry. PZT samples show promising results for applications where a low voltage operation is a key benefit. Poled PZT films are obtained after process completion and influence of DC biases on the resonance frequencies are observed.     

A simple electronic device and computer interface system for monitoring chewing behavior of stall-fed ruminant animals

A simple and low cost electronic switching device interfaced to a microcomputer was developed and utilized to monitor the chewing behavior of stall-fed cattle. The system transforms jaw movements directly into binary notation. The device is attached to a halter and consists of two contact points inserted into a piece of rubber tubing. Elongation of the rubber tubing by the movements of the lower jaw breaks the electrical circuit between the contact points. Every break in the circuit is recorded as a chew by the time-clock-equipped microcomputer, which records animal and time of each chew (nearest second). Data are stored automatically at the end of every hour and later transferred to diskettes for permanent storage and future processing. Use of an interface card allows simultaneous monitoring of up to eight animals. A program was written to separate chewing during eating from chewing during rumination. The system has been used successfully for approximately 2500 steer-h and could be easily adapted to most species of ruminants.