Reversible changes of the fill factor in the ZnO/CdS/Cu(In,Ga)Se2 solar cells

The reversible persistent changes of the fill factor (FF) induced by the illumination and voltage bias along with changes in the electronic properties of the ZnO/CdS/Cu(In,Ga)Se₂ photovoltaic devices have been studied. Admittance spectroscopy and capacitance–voltage characterization reveal a correlation between the FF and the space charge distribution within the absorber. Our experiments provide evidence that a major source of FF loss in efficient devices is caused by excess negative charge close to the interface. We explain the persistent changes in the net acceptor concentration in the interface region by the relaxation effects due to compensating donors—the same mechanism, which leads to metastable changes of the doping level in the bulk of the absorber.     

Probabilistic cell modelling of cleavage fracture

Various aspects on probabilistic modelling of cleavage fracture are discussed. The investigation involves consideration of a unit cell with an explicitly modelled void. The results from this model are compared with results for the case when the void content is accounted for in the sense of a Gurson-Tvergaard law. It is found that explicit modelling of the void can give substantially different results for the fracture probability. The effect depends on the exponent in the assumed Weibull distribution, the threshold stress, the constraint conditions and the hardening of the material. This revised version was published online in August 2006 with corrections to the Cover Date.     

Lysophosphatidylcholine is involved in the antigenicity of oxidized LDL

Lysophosphatidylcholine (LPC) is formed by hydrolysis of PC in low density lipoprotein (LDL) and cell membranes by phospholipase A2 or by oxidation. Oxidized (ox) LDL activates endothelial cells, an effect mimicked by LPC. oxLDL also has the capacity to activate T and B cells, and antibody titers to oxLDL are related to the degree of atherosclerosis. The antigen in oxLDL responsible for its immune-stimulatory capacity is not well characterized, and we hypothesized that LPC was involved. We demonstrate herein the presence of antibodies against LPC, both of the IgG and IgM isotype, in 210 healthy individuals. This antibody reactivity was not specifically related to oxidation of the fatty acid moiety in LPC, since LPC containing only palmitic acid showed antibody titers equivalent to those of LPC containing unsaturated fatty acids. Antibody titers to PC were low compared with LPC, and hydrolysis of PC at the sn-2 position is thus essential for immune reactivity. There was a close correlation between anti-oxLDL and anti-LPC antibodies. Furthermore, LPC competitively inhibited anti-oxLDL reactivity, which indicates that LPC may explain a significant part of the immune-stimulatory properties of oxLDL. LPC, being a lipid, is not likely to be an antigen itself. Instead, LPC could form immunogenic complexes with peptides, which may induce and potentiate immune reactions in the vessel wall. This study adds to the evidence that LPC is an important component of oxLDL and emphasizes the potential role of phospholipase A2 in atherosclerosis.     

Bone growth and bone development in the presence of implants or after induced leg-lengthening studied using the Oxford Scanning Proton Microprobe

To respond to varying environmental demands the bone tissue in the body is under continual reconstruction throughout life. It is known that metallic elements are important for maintaining normal bone structure, but their roles are not well understood. More information about the effects of metal excess or deficiency is needed to help in the development of metallic bone implants and to improve the treatment of bone fractures and defects. The Oxford Scanning Proton Microprobe (SPM) is being applied in two studies involving metal ions in bone: (1) bone regrowth and bonding to titanium bone implants may be influenced by diffusion of Ti ions into the bone. We are using microPIXE to determine the metal ion content of bone developing in contact with implants of pure Nb, Ti and Ti alloys. (2) Bone lengthening as a surgical procedure is induced by fracturing the bone and allowing it to heal with a small gap between the fractured ends created by the use of external fixators. The gap can be slowly increased during the healing process to stimulate the production of new bone. The enzymes and other constituents of the developing bone need certain metals for their function. Using experimental animals we have studied the concentrations of the metals and whether a deficiency of trace metals limits the optimum rate of bone lengthening.     

On the solubility of aluminum in cryolitic melts

The solubility of aluminum in NaF-AlF₃-Al₂O₃ melts with various additives was found to increase with increasing NaF/AlF₃ molar ratio (CR) and increasing temperature and to decrease with additions of A1₂O₃, CaF₂, MgF₂, and LiF to the melts. With the use of literature data for the activities of NaF and A1F₃ in cryolitic melts, three dissolution reaction models were found to give a good fit to the experimental solubility data. According to the most probable of these models the total concentration of dissolved aluminum (aluminum and sodium species) is given by c_Al = c_Na(diss) + c_AlF2- + c_Al2F3- + c_Al3F4- + c_Al4F5- In NaF rich melts, aluminum will dominantly dissolve as sodium, while at cryolite ratios commonly used in aluminum electrowinning (CR = 2.25 to 2.7) the AlF _-2 ^- -ion is the predominant dissolved metal species. Other species (A1₂F₃ ^-, A1₃F₄-, A1₄F₅-) were found to be of some significance only in melts with high excess A1F₃ (CR < 2).     

The effect of appraisers in estimating metabolic rate with the Edholm scale

A study was made of the appraisers' effect on the estimation of metabolic rate with the Edholm scale and a table of the ISO 7243 heat stress standard. The appraisers, five experienced and five inexperienced persons, estimated the metabolic rate of three different work tasks from videotapes. Analysis of variance indicated significant ( [Formula: see text] ) differences in the appraisers' recordings of the activities. The appraisers were grouped according to the similarity of the estimated values they gave. The groups thus contained both experienced and inexperienced appraisers, and it was not possible to classify the appraisers into experienced and inexperienced groups according to their earlier experience. The metabolic rates according to the Edholm scale were higher than according to the ISO 7243 table. The differences in metabolic rates given by the individual observers varied from 38 to 118 W/m(2). The variations in the estimation of metabolic rates were greater when the Edholm scale was used. This variation caused considerable variation also in the predicted mean vote, PMV index. It is recommended that the appraisers be selected carefully, because it is not possible to know whether a randomly selected appraiser is an 'average' or an 'extreme' appraiser without a test. Before conducting extensive field surveys where several appraisers estimate the metabolic rates, it would be useful to arrange training in order to calibrate the levels of the Edholm scale as well as ISO method among the appraisers because training clearly unified the estimation.     

Majority gates vs. general weighted threshold gates

In this paper we study small depth circuits that contain threshold gates (with or without weights) and parity gates. All circuits we consider are of polynomial size. We prove several results which complete the work on characterizing possible inclusions between many classes defined by small depth circuits. These results are the following:

Enthalpies of formation of transition-metal lanthanide laves phases with the MgCu2 structure

Experimental information and theoretical estimates for the enthalpy of formation at 298 K for the RM₂ (whereM = Fe, Co,orNi andR = La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, or Lu) lanthanide Laves phases with the MgCu₂ (C15) structure are reviewed and discussed in the light of information on lattice parameters and atomic volume. The purpose of the present study is to analyze all the available experimental information on enthalpies of formation for transition-metal lanthanide Laves phases and then plot the data in order to reveal tendencies and allow reliable estimates of data that have not yet been measured. It is concluded that as the lanthanide atomic number increases the enthalpy of formation is almost constant or becomes slightly more negative. The accompanying volume contraction is slightly larger than expected from the lanthanide contraction, 7.6 %. From the so-called Gschneidner correlation one would have expected the contrary behavior, that is, that the bonding strength would become slightly lower when going from LaM₂ to LuM₂. An increase in the transition-metal atomic number has a stronger effect on the enthalpy of formation and atomic volume than an increase in the lanthanide atomic number.     

Effect of Carbon Content on Variant Pairing in Bainitic Low Alloy Steel

Metallurgical and Materials Transactions A - Variant pairing in bainite was evaluated in four different commercial low alloy steels with medium to high carbon content. The steels investigated were...