In vivo evaluation of a mucoadhesive polymeric caplet for intravaginal anti-HIV-1 delivery and development of a molecular mechanistic model for thermochemical characterization

Context and objective: The aim of this study was to develop, characterize and evaluate a mucoadhesive caplet resulting from a polymeric blend (polymeric caplet) for intravaginal anti-HIV-1 delivery.

Materials and methods: Poly(lactic-co-glycolic) acid, ethylcellulose, poly(vinylalcohol), polyacrylic acid and modified polyamide 6, 10 polymers were blended and compressed to a caplet-shaped device, with and without two model drugs 3′-azido-3′-deoxythymidine (AZT) and polystyrene sulfonate (PSS). Thermal analysis, infrared spectroscopy and microscopic analysis were carried out on the caplets employing temperature-modulated DSC (TMDSC), Fourier transform infra-red (FTIR) spectrometer and scanning electron microscope, respectively. In vitro and in vivo drug release analyses as well as the histopathological toxicity studies were carried out on the drug-loaded caplets. Furthermore, molecular mechanics (MM) simulations were carried out on the drug-loaded caplets to corroborate the experimental findings.

Results and discussion: There was a big deviation between the T_g of the polymeric caplet from the T_g's of the constituent polymers indicating a strong interaction between constituent polymers. FTIR spectroscopy confirmed the presence of specific ionic and non-ionic interactions within the caplet. A controlled near zero-order drug release was obtained for AZT (20 d) and PSS (28 d). In vivo results, i.e. the drug concentration in plasma ranged between 0.012–0.332?mg/mL and 0.009–0.256?mg/mL for AZT and PSS over 1–28 d.

Conclusion: The obtained results, which were corroborated by MM simulations, attested that the developed system has the potential for effective delivery of anti-HIV-agents.     

The importance of geriatrics to family medicine: a position paper by the Group on Geriatric Education of the Society of Teachers of Family Medicine

The role of geriatrics and geriatricians in family medicine remains unsettled. Despite a rapidly aging population, a tremendous shortage now exists of faculty with interest and expertise in geriatrics. Relatively few family practice residents choose to enter geriatric fellowship programs, and federal funding for such programs has been reduced. Despite accreditation requirements, residency programs are not always able to provide the range of geriatric experiences needed to properly prepare graduates to provide care for the broad range of older patients. Medical students' exposure to geriatrics remains limited. The Group on Geriatric Education of the Society of Teachers of Family Medicine believes that family medicine faculty must recognize and be committed to the notion that geriatrics is integral to family medicine. Both undergraduate and residency training programs should emphasize experience with geriatric patients in multiple settings. In particular, the nursing home should not be the main focus of geriatric training. The small number of certified geriatric faculty will be able to provide leadership, but a broad range of faculty must become involved in teaching geriatrics. Faculty development activities and continuing education programs to foster the necessary expertise will be essential to the accomplishment of this task.     

Influence of fretting on the fatigue strength at the vise clamp-specimen interface

Fretting fatigue is one of the most important phenomena for inducing a significant reduction of fatigue strength and consequently, leading to unexpected failure accidents of the engineering structures even at very low stresses. In the present study, both plain and fretting fatigue tests with zero mean stress were carried out on two different types of steel, low-carbon steel and martensitic stainless steel, by means of a reversed bending fatigue testing machine. The drop in the fatigue strengths through fretting at vise clamp-specimen interface were significant for both tested steels. The fretting processes produced a reduction in fatigue strength of about 27% for low-carbon steel and 16% for martensitic stainless steel.     

Robust ℋ︁∞ PID control for multivariable networked control systems with disturbance/noise attenuation

In this paper, we study the design problem of PID controllers for networked control systems (NCSs) with polyhedral uncertainties. The load disturbance and measurement noise are both taken into account in the modeling to better reflect the practical scenario. By using a novel technique, the design problem of PID controllers is converted into a design problem of output feedback controllers. Our goal of this paper is two‐fold: (1) To design the robust PID tracking controllers for practical models; (2) To develop the robust ??_∞ PID control such that load and reference disturbances can be attenuated with a prescribed level. Sufficient conditions are derived by employing advanced techniques for achieving delay dependence. The proposed controller can be readily designed based on iterative suboptimal algorithms. Finally, four examples are presented to show the effectiveness of the proposed methods. Copyright © 2011 John Wiley & Sons, Ltd.     

An efficient recommender system algorithm using trust data

The Journal of Supercomputing - Smart services are a concept that provides services to the citizens in an efficient manner. The online shopping and recommender system can play an important role for...     

Flexural behavior of stratified reinforced concrete: construction,testing, analysis,and design

Stratified concrete poses a promising alternative for construction. Its fresh and hardened properties have been studied at the material level; however, structural behavior in steel reinforced specimens has not been studied. This paper focuses on the flexural behavior of eight stratified reinforced concrete (SRC) specimens representing slices from a slab or non-bearing wall. Specimens with two stratified concrete designs and three steel ratios were tested and compared to estimates from a fiber element numerical model and rectangular stress-block design methods from ACI 318 and Eurocode 2. The results suggest that SRC has similar damage modes as ordinary reinforced concrete (ORC). The fiber element model accurately estimated the measured behavior, while ACI 318 and Eurocode 2 differed from the experimental results by <25%. These prediction accuracies are similar to those for ORC. Therefore, the flexural design of SRC can be done using both fiber element and rectangular stress-block approaches.     

Eco‐friendly synthesis of silver nanoparticles and its larvicidal property against fourth instar larvae of Aedes aegypti

In this study, larvicidal activity of silver nanoparticles (AgNPs) synthesised using apple extract against fourth instar larvae of Aedes aegypti was determined. As a result, the AgNPs showed moderate larvicidal effects against Ae. aegypti larvae (LC₅₀  = 15.76 ppm and LC₉₀  = 27.7 ppm). In addition, comparison of larvicidal activity performance of AgNPs at high concentration prepared using two different methods showed that Ae. aegypti larvae was fully eliminated within the duration of 2.5 h. From X‐ray diffraction, the AgNP crystallites were found to exhibit face centred cubic structure. The average size of these AgNPs as estimated by particle size distribution was in the range of 50–120 nm. The absorption maxima of the synthesised Ag showed characteristic Ag surface plasmon resonance peak. This green synthesis provides an economic, eco‐friendly and clean synthesis route to Ag.Inspec keywords: silver, nanofabrication, X‐ray diffraction, zoology, particle size, nanoparticles, biomedical materials, nanomedicineOther keywords: time 2.5 h, size 50 nm to 120 nm, silver nanoparticle, larvicidal property, instar larvae, Aedes aegypti, larvicidal effect, larvicidal activity performance, X‐ray diffraction, nanoparticle particle size distribution, absorption maxima, silver surface plasmon resonance peak     

Additive Manufacturing of Porous Structures for Unmanned Aerial Vehicles Applications

Unmanned aerial vehicles (UAVs) have shown promising benefits in many applications. This has been enabled by the emergence of additive manufacturing (AM), which give the designers a large amount of geometrical freedom. In this paper, a novel design process of fused deposition modeling (FDM) combining both topology and infill optimization is introduced for AM of high performance porous structures. Tensile testing of FDM printed samples is first carried out to study the effect of the build orientation on the mechanical properties of acrylonitrile butadiene styrene (ABS) samples. It is found that samples built perpendicular to the load axis are the weakest with a tensile strength of 29 MPa and Young's modulus of 1960 MPa. The materials properties are fed to the finite elements analysis (FEA) for geometrical topology optimization, aiming to maximize stiffness and reduce weight of those parts. Afterwards, an infill optimization is carried out on the topology optimized parts using different mesostructures such as honeycomb, triangular, and rectangular to achieve high structural performance. The results showed that triangular pattern with 50% infill density had the lowest developed stresses, less mass, and strain energy when compared to other structures. Optimum UAVs parts of a quadcopter are successfully manufactured, assembled, and tested.

     

Fuzzy-HLSTM (Hierarchical Long Short-Term Memory) for Agricultural Based Information Mining

This research proposes a machine learning approach using fuzzy logic to build an information retrieval system for the next crop rotation. In case-based reasoning systems, case representation is critical, and thus, researchers have thoroughly investigated textual, attribute-value pair, and ontological representations. As big databases result in slow case retrieval, this research suggests a fast case retrieval strategy based on an associated representation, so that, cases are interrelated in both either similar or dissimilar cases. As soon as a new case is recorded, it is compared to prior data to find a relative match. The proposed method is worked on the number of cases and retrieval accuracy between the related case representation and conventional approaches. Hierarchical Long Short-Term Memory (HLSTM) is used to evaluate the efficiency, similarity of the models, and fuzzy rules are applied to predict the environmental condition and soil quality during a particular time of the year. Based on the results, the proposed approaches allows for rapid case retrieval with high accuracy.