Design of High Sensitive Temperature Sensor Based on Two-Dimensional Photonic Crystal

In this effort, a two-dimensional photonic crystal ring resonator (2DPCRR) is simulated. This device is developed for temperature detection in harsh enviro     

Mobility management support and performance analysis for wireless MPLS networks

Multi‐Protocol Label Switching (MPLS) is deployed in the Internet backbone to support service differentiation and traffic engineering. In recent years, there has been interest in extending the MPLS capability to wireless access networks for mobility management support. In this paper, we present analysis of Micro Mobile MPLS, a new micro‐mobility management scheme which integrates the Mobile IP and MPLS protocols by using two‐level hierarchy architecture. Our proposal supports two protocol variants. First, the fast handoff process, which anticipates the LSP procedure set‐up with neighboring locations where a mobile node (MN) may move to, is provided to reduce service disruption. Second, a new mechanism based on the forwarding chain concept is proposed to track efficiently the host mobility within a domain. This concept can significantly reduce registration update costs and provide low handoff latency. Analytical models are developed and simulations are conducted to justify the benefits of our proposed mechanisms. Copyright © 2006 John Wiley & Sons, Ltd.     

Selectivity of partial hydrogenation reactions performed in a pore-through-flow catalytic membrane reactor

The selectivity of partial hydrogenation reactions of unsaturated substrates was studied in a membrane reactor operating at 323 K and 40 bar hydrogen pressure. The reactor system was constructed as a loop of a saturation vessel and a membrane module in which the reaction mixture was resaturated with hydrogen up to 100 times. In a porous membrane made from cross-linked polyacrylic acid palladium nanoparticles were incorporated as catalysts. A well-defined residence time within the membrane was achieved due to a defined pore structure of the membrane and a convective mass flow of the reaction mixture through the membrane. The selectivity for the partially hydrogenated products was investigated as a function of the pore size of the PAA membrane and was compared to commercially available catalysts. Compared to experiments with supported catalysts (Pd/C and Pd/Al₂O₃) in a slurry and a fixed bed reactor the selectivity for the desired products could be increased by 3% (1-octyne) up to 40% (geraniol).     

Use of pyrogenic silicas for petroleum oil polar fraction characterisation. Fourier transform infrared spectroscopy and microelectrophoresis studies

In the power transformer, the presence of polar or charged species in the insulating oil can cause failure and electric discharges. Solid substrates such as silica can be used to extract the polar species and to refine the oil in order to prevent future failure in the power transformer. However, the use of silica for petroleum oil separation and refining will depend on the silica characteristics such as surface charge, surface composition, specific surface area and particle size.Various pyrogenic silicas having various specific surface areas (49-200 m² g⁻¹) and particle sizes (207-500 nm) were used to extract the polar fractions from the neat transformer insulating oils (a new, NO, and used, UO2, oils). The oil covered silica samples were investigated by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy in the range 4000-600 cm⁻¹. The bare silica surfaces present two main hydroxyl components, a sharper peak at 3745 cm⁻¹, I₃₇₄₅, due to isolated silanols and a second broad, which spreads over 3745-3000 cm⁻¹, I_3745-3000, due to H-bonded silanols. The relative intensities of the two components, I₃₇₄₅/I_3745-3000, varied for the bare and the oil covered silicas depending on the solid surface characteristics. The adsorption of the NO polar fraction onto silica leads to strong reduction in intensity of the sharper peak in favour of the broad one. However, the adsorption of the UO2 polar fraction onto silica leads in all cases to the decrease in the intensity of the both silica OH components. Further, the UO2 adsorption on the silica leads to the apparition of a broad peak at low frequency in the region 3250-3300 cm⁻¹ which, is due to the associated phenolic groups of UO2 oil polar fraction. The analysis of the DRIFT spectra for various samples indicates that the oil polar fraction resembles to asphaltenes compounds.The microelectrophoresis method used to investigate the surface charge at the water/oil polar fraction covered silica interface, indicates negatively charged particles. Further, the negative charge increased with the pH, as resulting from the increase of the ionisation and/or the amount of the oil polar carboxylic and phenolic groups. The oil polar fraction, i.e. the asphaltene components, in contact with both the silica surface and water at high pH values rearrange, due to their amphiphilic character.Finally, the use of the silica substrates seems to be suited to extract and analyse polar species present in petroleum oil. A correlation is found between the nature of the oil, its functionalities, and the magnitude of its zeta potential value at the water/oil covered silica interface.     

Towards a Dual-Tip STM Application in Mesoscopic Electron Transport

A new design for a dual-tip scanning tunneling microscope (STM) is presented. The design is a variation on the mechanically controllable break-junction with two electron beam-induced deposition nano-tips. The new design enables one to scan surfaces simultaneously with two probes having a nano-gap separation. By collecting the lateral current flowing between the tips, the transconductance map can then be compared with the STM images for local characterizations of the electron transport. Since the lateral beam carries the property of the density of states of the surface at momentum space, the dispersion of the electronic structure should give an orientation and position dependence of the local transconductance current. In addition, the reduced terminal separation, on the order of the characteristic mesoscopic length scales, is likely to be sensitive to a variety of typically observed interactions and interference effects.     

Electrochemical and analytical study of corrosion inhibition on carbon steel in HCl medium by 1,12-bis(1,2,4-triazolyl)dodecane

1,12-bis(1,2,4-triazolyl)dodecane (dTC12) is an excellent corrosion inhibitor for carbon steel in deaerated 1 M HCl solution. In this work electrochemical and analytical techniques were used to study the inhibition of corrosion on carbon steel in acidic medium. The carbon steel corrosion inhibition of dTC12 was attributed to the synergistic effect between chloride anion and quaternary ammonium ion. The protective efficiency of the film was higher than 90%, indicating that corrosion of carbon steel in 1 M HCl is reduced by dTC12.The effect of dissolved oxygen on the inhibition efficiency was also investigated. The results show that the inhibition efficiency increases in early stage and decreases for a long immersion time.