Fault containment in weakly stabilizing systems

Research on fine tuning stabilization properties has received attention for more than a decade. This paper presents probabilistic algorithms for fault containment. We demonstrate two exercises in fault containment in a weakly stabilizing system, which expedite recovery from single failures, and confine the effect of any single fault to the constant-distance neighborhood of the faulty process. The most significant aspect of the algorithms is that the fault gap, defined as the smallest interval after which the system is ready to handle the next single fault with the same efficiency, is independent of the network size. We argue that a small fault gap increases the availability of the fault-free system.     

A novel channel-identification method for wireless communication systems

We present a novel dual-channel identification approach for mobile wireless communication systems. Unlike traditional channel-estimation methods that rely on training symbols, we propose a bent-pipe feedback mechanism which requires the mobile station (MS) to send portions of its received signal back to the base station (BS) for wireless channel identification. Using a filter-bank decomposition concept, we introduce an effective algorithm that can identify both the forward and the reverse channels based only on this feedback information. This new method permits transfer of computational burden from the MS to the resource-rich BS, and leads to significant savings in bandwidth-consuming training signals.     

Simulations for the Development of Thermoelectric Measurements

In thermoelectricity, continuum theoretical equations are usually used for the calculation of the characteristics and performance of thermoelectric elements, modules or devices as a function of external parameters (material, geometry, temperatures, current, flow, load, etc.). An increasing number of commercial software packages aimed at applications, such as COMSOL and ANSYS, contain vkernels using direct thermoelectric coupling. Application of these numerical tools also allows analysis of physical measurement conditions and can lead to specifically adapted methods for developing special test equipment required for the determination of TE material and module properties. System-theoretical and simulation-based considerations of favorable geometries are taken into account to create draft sketches in the development of such measurement systems. Particular consideration is given to the development of transient measurement methods, which have great advantages compared with the conventional static methods in terms of the measurement duration required. In this paper the benefits of using numerical tools in designing measurement facilities are shown using two examples. The first is the determination of geometric correction factors in four-point probe measurement of electrical conductivity, whereas the second example is focused on the so-called combined thermoelectric measurement (CTEM) system, where all thermoelectric material properties (Seebeck coefficient, electrical and thermal conductivity, and Harman measurement of zT) are measured in a combined way. Here, we want to highlight especially the measurement of thermal conductivity in a transient mode. Factors influencing the measurement results such as coupling to the environment due to radiation, heat losses via the mounting of the probe head, as well as contact resistance between the sample and sample holder are illustrated, analyzed, and discussed. By employing the results of the simulations, we have developed an improved sample head that allows for measurements over a larger temperature interval with enhanced accuracy.     

A new normalized relatively stable lattice structure

This paper proposes a new lattice filter structure that has the following properties. When the filter is linear time invariant (LTI), it is equivalent to the celebrated Gray-Markel lattice. When the lattice parameters vary with time, it sustains arbitrary rates of time variations without sacrificing a prescribed degree of stability, provided that the lattice coefficients are magnitude bounded in a region where all LTI lattices have the same degree of stability. We also show that the resulting LTV lattice obeys an energy contraction condition. This structure thus generalizes the normalized Gray-Markel lattice, which has similar properties but only with respect to stability as opposed to relative stability     

Finite-element modeling of soft tissue rolling indentation

We describe a finite-element (FE) model for simulating wheel-rolling tissue deformations using a rolling FE model (RFEM). A wheeled probe performing rolling tissue indentation has proven to be a promising approach for compensating for the loss of haptic and tactile feedback experienced during robotic-assisted minimally invasive surgery (H. Liu, D. P. Noonan, B. J. Challacombe, P. Dasgupta, L. D. Seneviratne, and K. Althoefer, "Rolling mechanical imaging for tissue abnormality localization during minimally invasive surgery, " IEEE Trans. Biomed. Eng., vol. 57, no. 2, pp. 404-414, Feb. 2010; K. Sangpradit, H. Liu, L. Seneviratne, and K. Althoefer, "Tissue identification using inverse finite element analysis of rolling indentation," in Proc. IEEE Int. Conf. Robot. Autom. , Kobe, Japan, 2009, pp. 1250-1255; H. Liu, D. Noonan, K. Althoefer, and L. Seneviratne, "The rolling approach for soft tissue modeling and mechanical imaging during robot-assisted minimally invasive surgery," in Proc. IEEE Int. Conf. Robot. Autom., May 2008, pp. 845-850; H. Liu, P. Puangmali, D. Zbyszewski, O. Elhage, P. Dasgupta, J. S. Dai, L. Seneviratne, and K. Althoefer, "An indentation depth-force sensing wheeled probe for abnormality identification during minimally invasive surgery," Proc. Inst. Mech. Eng., H, vol. 224, no. 6, pp. 751-63, 2010; D. Noonan, H. Liu, Y. Zweiri, K. Althoefer, and L. Seneviratne, "A dual-function wheeled probe for tissue viscoelastic property identification during minimally invasive surgery," in Proc. IEEE Int. Conf. Robot. Autom. , 2008, pp. 2629-2634; H. Liu, J. Li, Q. I. Poon, L. D. Seneviratne, and K. Althoefer, "Miniaturized force indentation-depth sensor for tissue abnormality identification," IEEE Int. Conf. Robot. Autom., May 2010, pp. 3654-3659). A sound understanding of wheel-tissue rolling interaction dynamics will facilitate the evaluation of signals from rolling indentation. In this paper, we model the dynamic interactions between a wheeled probe and a soft tissue sample using the ABAQUS FE software package. The aim of this work is to more precisely locate abnormalities within soft tissue organs using RFEM and hence aid surgeons to improve diagnostic ability. The soft tissue is modeled as a nonlinear hyperelastic material with geometrical nonlinearity. The proposed RFEM was validated on a silicone phantom and a porcine kidney sample. The results show that the proposed method can predict the wheel-tissue interaction forces of rolling indentation with good accuracy and can also accurately identify the location and depth of simulated tumors.     

A transmit/receive IF chip set for WCDMA mobiles in 0.35 /spl mu/m CMOS

An implementation of the IF section of WCDMA mobile transceivers with a set of two chips fabricated in an inexpensive 0.35-/spl mu/m two-poly three-metal CMOS process is presented. The transmit/receive chip set integrates quadrature modulators and demodulators, wide dynamic range automatic gain control (AGC) amplifiers, with linear-in-decibel gain control, and associated circuitry. This paper describes the problems encountered and the solutions envisaged to meet stringent specifications, with process and temperature variations, thus overcoming the limitations of CMOS devices, while operating at frequencies in the range of 100 MHz-1 GHz. Detailed measurement results corroborating successful application of the new techniques are reported. A receive AGC dynamic range of 73 dB with linearity error of less than /spl plusmn/2 dB and spread of less than 5 dB for a temperature range of -30/spl deg/C to +85/spl deg/C in the gain control characteristic has been measured. The modulator measurement shows a carrier suppression of 35 dB and sideband/third harmonic suppression of over 46 dB. The core die area of each chip is 1.5 mm/sup 2/.     

Quantum mechanical analytical modeling of nanoscale DG FinFET: evaluation of potential,threshold voltage and source/drain resistance

Two-dimensional (2D) quantum mechanical analytical modeling has been presented in order to evaluate the 2D potential profile within the active area of FinFET structure. Various potential profiles such as surface, back to front gate and source to drain potential have been presented in order to appreciate the usefulness of the device for circuit simulation purposes. As we move from source end of the gate to the drain end of the gate, there is substantial increase in the potential at any point in the channel. This is attributed to the increased value of longitudinal electric field at the drain end on application of a drain to source voltage. Further, in this paper, the detailed study of threshold voltage and its variation with the process parameters are presented. A threshold voltage roll-off with fin thickness is observed for both theoretical and experimental results. The fin thickness is varied from 10 nm to 60 nm. The percentage roll-off for our model is 77% and that for experimental result it is 75%. Form the analysis of source/drain (S/D) resistance, it is observed that for a fixed fin width, as the channel length increases, there is an enhancement in the parasitic S/D resistance. This can be inferred from the fact that as the channel length decreases, quantum confinement along the S/D direction becomes more extensive. For our proposed devices a close match is obtained with the results through the analytical model and reported experimental results, thereby validating our proposed QM analytical model for DG FinFET device.     

Dynamic Control Over Electronic Transport in 3D Bulk Nanographene via Interfacial Charging

Electrochemical surface charge‐induced variation of physical properties in interface‐dominated bulk materials is a rapidly emerging field in material science. The recently developed three‐dimensional bulk nanographene (3D‐BNG) macro‐assemblies with ultra‐high surface area and chemical inertness offer new opportunities in this area. Here, the electronic transport in centimeter‐sized 3D‐BNG monoliths can be dynamically controlled via electrochemically induced surface charge density. Specifically, a fully reversible variation in macroscopic conductance up to several hundred percent is observed with ≤1 V applied gate potential. The observed conductivity change can be explained in the light of the electrochemically‐induced accumulation or depletion of charge carriers in combination with a large variation in the carrier mobility; the latter, being highly affected by the defect density modulations resulting from the interfacial charge injection, sharply decreases with an increase in defect concentrations. The phenomenon presented in this study is believed to open the door to novel applications of bulk graphene materials such as, for example, low voltage and high power tunable resistors.