Effects of high-pressure-modified soy 11S globulin on the gel properties and water-holding capacity of pork batter

The effects of high-pressure-modified soy 11S globulin (0.1, 200, and 400 MPa) on the gel properties, water-holding capacity, and water mobility of pork batter were investigated. The high-pressure-modified soy 11S globulin significantly increased (P < 0.05) the emulsion stability, cooking yield, hardness, springiness, chewiness, resilience, cohesiveness, the a^* and b^* values, and the G′ and G′′ values of pork batter at 80 °C, compared with those of 0.1 MPa-modified globulin. In contrast, the centrifugal loss and initial relaxation time of T_2b, T₂₁, and T₂₂ significantly decreased (P < 0.05). Meanwhile, the microstructure was denser, and the voids were smaller and more uniform compared with those of 0.1 MPa-modified globulin. In addition, the sample with 11S globulin modified at 400 MPa had the best water-holding capacity, gel structure, and gel properties among the samples. Overall, the use of high-pressure-modified soy 11S globulin improved the gel properties and water-holding capacity of pork batter, especially under 400 MPa.     

MPEG-4 AAC解码器在NIOS Ⅱ平台上的实现和优化

给出了MEPG-4AAC实时解码器在NIOSⅡ平台的实现方案，介绍了MPEG-4AAC—LC解码算法及各关键模块优化算法。在完成实时解码要求下，结合NIOSⅡ平台特性，对解码器在软件代码与处理器上进行优化。实验结果表明CPU时钟为80MHz时能达到实时解码要求。     

粘土矿物用于乙烯聚合催化剂的研究 Ⅰ.以凹凸棒石粘土为载体的乙烯聚合催化剂

研究了以凹凸棒石粘土为载体,负载TiCl4制备的乙烯聚合催化剂的结构、性能及制备规律。结果表明,催化剂中Ti的负载量随焙烧温度的提高而逐渐降低,聚合活性随焙烧温度的提高呈上升趋势,但过高的焙烧温度也会导致粘土晶体结构的彻底破坏而不利于活化粘土活性的提高;通过采用烷基铝等有机金属化合物处理粘土同样可以极大地改善粘土性质,提高催化活性。不同助催化剂对以凹凸棒石粘土为载体的催化剂的聚合性能有较大影响。     

高频红外法测定钨粒中痕量碳硫研究

对选用的高频燃烧红外吸收(HFIR)仪的部分电路、气路及操作技术进行了必要的改进,降低其噪声,提高其灵敏度和稳定性;选用与试样基体接近的国际级低C,S标样,以不同的C,S量校正仪器,确定痕量C,S工作曲线的线性与校正系数;试验确定了试样的高频加热燃烧和CO2,SO2准确测量的最佳条件,建立新的钨粒中痕量C,S的HFIR分析法,测定下限均降至1.0μg/g的新水平,优于现行国标方法和以前的HFIR法研究工作.     

多约束的桥梁结构拓扑优化

基于ESO (Evolutionary Structural Optimization)的拓扑优化方法,本文提出了一种适应于桥梁结构的拓扑优化方法。引进了两种性能指标公式来确定最佳拓扑设计。另外,为了更有效地尝试改进最终设计的细节,而又不进行更精细有限元网格的完整分析,这里提出了一种精细网络设计方案。再者,结合细啃技术,完成了考虑应力、位移、频率约束的斜拉桥优化设计。通过几种桥梁的设计优化,表明该方法的可应用性、简洁性和有效性。     

Influence of Ti Powder Characteristics on Combustion Synthesis of Porous NiTi Alloy

Porous NiTi shape memory alloy (SMA) is a novel biomedical material used for human hard tissue implant .The influence of elemental titanium powder characteristics such as powder morphology, particle size and specific surface area( SSA) on the minimal ignition temperature ,combustion temperature and final product of porous Ni-Ti SMA fabricated by combustion synthesis method was investigated in this paper by scanning electron microscopy (SEM) and laser diffraction.The preliminary data indicated that the titanium powder characteristics had a strong effect on combustion synthesis of porous NiTi SMA.     

直接纺大批量POY260dtex/144f生产工艺探讨

研究了熔体直接纺长丝装置大批量生产差别化纤维 2 60dtex/14 4fPOY品种的工艺 ,并且对影响POY质量的因素进行了探讨     

PLC在环锭捻线机上的应用

介绍了如何使用PLC和数字变频调速技术 ,对传统环锭捻线机进行技术改造 ,使锭速、捻度和卷绕成形变换实现数字化柔性控制 ,扩大了工艺参数的变化范围 ,使整个捻线加工车间实现信息化管理成为可能。     

光刻技术及其新进展

介绍了用于制作半导体集成电路的光刻工艺的概念、分类及发展过程，阐述了当前光刻工艺的主流，并重点介绍了极紫外光刻、X射线光刻、电子束光刻、离子束光刻、纳米图形转印等下一代光刻技术的特点及其面临的挑战。     

The Influence of Medium on Low-Voltage Circuit Breaker Arcs

This paper mainly focuses on the influence of three kinds of media： air, air-10%PA （Nylon） and air-10% POM （polyoxymethylene） on low-voltage circuit breaker arcs. A threedimensional （3-D） model of arc motioa under the effect of external magnetic field is built based on magnetohydrodynamics （MHD） equations. By adopting the commercial computational fluid dynamics （CFD） package based on the control-volume method, the above MHD equations are solved. For the media of air-10%PA and air-10%POM, the distributions of stationary temperature and electrical potential and the transient motion processes are compared with those of air arc. The research shows that both air-10%PA and air -10% POM can cool the arc plasma and the former is more effective. Both of them can increase the stationary voltage as well. Moreover, the presence of the two mixtures can accelerate the arc motion toward the quenching area and ensures the arc quenched in time.