Operating Range Scheduled Robust Dahlin Algorithm to Typical Industrial Process with Input Constraint

International Journal of Control, Automation and Systems - There is a class of typical nonlinear industrial process, which can be characterized by a first-order inertia plus pure delay model in an...     

基于重量分析的OBDD变量排序算法

有序的二叉判决图（ＯＢＤＤ）是布尔表达式的一种有效表示方法，但它的体积对变量排序具有较强的依赖性。本文提出一种电路结构图，并在此基础上定义了原始输入重量和节点重量等参数，并建立了用重量分析来指导的ＯＢＤＤ变量排序算法。由于从考虑变量对输出函数的影响出发与从考虑ＯＢＤＤ节点共享性出发对变量排序的要求不同，本文分别设计了两类算法。实验结果表明，本文对大多数标准电路变量排序的效果都优于国际上的同类算法，     

水乳型丙烯酸酯建筑防水胶的研制(Ⅱ)

摘 要 研究水乳型丙烯酸酯建筑防水胶与水泥的配比及共混性能、共混固化物胶膜的力学性能、耐冷热性能及老化性能。     

模拟电路的模块级故障诊断

本文以多端口元件或子网络为基本单元，提出了一种模块级故障诊断方案，这种方案的故障模型更符合电路的实际情况，因而具有更广泛的实际意义，文中首先推导了模块故障诊断议程，并对模块故障可测性问题进行了一般性讨论。然后，给出了模块故障可测的几个拓扑条件，并通过定义广义独立通路使这些拓扑条件适用于一般的非互易网络。     

An approximate method for computing performance-related reliability of gracefully degrading systems

Using existing methods, the computation of performance-related reliability (PRR) of large-scale gracefully degrading systems is very tedious and time consuming. In this paper, the behaviour of such systems is respectively modeled as two types of diffusion processes according to their reconfiguration coverage. If the coverage is 1 (i.e. the reconfiguration is always successful), it is modeled as a regular diffusion. If, on the other hand, the coverage is less than one, it is modeled as diffusion with killing. Kolmogorov backward equations for regular diffusion processes and for diffusions with killing are then applied to compute the PRR. The methods have been applied in several examples, and the results satisfactorily agree with the accurate results.     

与性能相关的容错计算系统可靠性指标

对于某些容错计算系统，由于成功与故障之间没有明确的界限，用传统的可靠性指标难以准确地评价其容错性能，为此一些学者提出了若干与性能相关的可靠性指标。本文将这些指标概括成三类（即基于瞬时性能的指标、基于累积收益的指标和率模可靠性指标）加以介绍，并简要介绍了它们的求解方法。     

Properties of poly(n‐butyl methacrylate) prepared by reverse atom transfer radical polymerization in an aqueous dispersed system

Reverse atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) in waterborne media using Cu(II) complexes with azo initiators (i.e., reverse ATRP) was conducted. The influence of several factors, such as surfactant, catalyst, and reaction time, on the stability of the emulsion, the particle size, the morphology of the emulsion particles, and the control of the polymerization was investigated. The results showed great differences between ATRP and conventional emulsion polymerization, especially the nucleation mechanism and the kinetics. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1542–1547, 2003     

固溶体补强增韧的机理

本文主要对无机非金属材料晶体因固溶外来离子而对晶体强度和韧性的贡献进行阐述。本文从固溶类型、点阵畸变、畸变应力着手进行讨论。     

P(MMA-DBMEA)乳液聚合研究

甲基丙烯酸甲酯 ( MMA)在无皂乳化剂条件下 ,加入少量的功能性单体 N,N一二甲基 ,N-丁基 ,N-甲基丙烯酰氧乙基溴化铵 ( DBMEA) ,合成了稳定的 P( MMA-DBMEA)共聚物乳液 .该共聚物乳胶粒呈现单分散分布。同时用 NMR研究了共聚物 ,并对 P( MMA-DBMEA)聚合物13 C进行了全归属。