Structural,optical and electrical properties of Cu<Subscript>2</Subscript>Zn<Subscript>1−x</Subscript>Cd<Subscript>x</Subscript>SnS<Subscript>4</Subscript> quinternary alloys nanostructures deposited on porous silicon

The Cu₂Zn_1?xCd_xSnS₄ quinternary alloy nanostructures with different Cd contents were grown using spin coating technique on porous silicon (63.93 %) substrate. The structural properties of Cu₂Zn_1?xCd_xSnS₄/PS were investigated by X-ray diffraction and field emission-scanning electron microscope (FE-SEM). The optical properties studied through photoluminescence technique, indicated that the band gap is shifted as Cd content increases from 1.84 eV at x = 0 to 1.76 eV at x = 1. The electrical characterization of the Ag/n-PS/Cu₂Zn_1?xCd_xSnS₄/Ag diode through current to voltage (I–V) characterization shows the highest photo-response of (value if any) at Cu₂Zn_0.4Cd_0.6SnS₄ composition.     

Molecular Identification of the G-Protein Genes and Their Expression Profiles in Response to Nitrogen Deprivation in Brassica napus

Heterotrimeric guanine nucleotide binding protein (G-protein) consisting of Gα, Gβ, and Gγ subunits is one of the key signal transducers in plants. Recent studies indicated that G-protein has been proposed as an important mediator of nitrogen responses in rice, wheat, and Arabidopsis. However, little is known about these G-proteins in Brassica napus (B. napus), except for three identified G-proteins, BnGA1, BnGB1, and BnGG2. Therefore, the aim of the present study is to characterize the members of the G-protein gene family in allotetraploid B. napus and to analyze their expression profiles in response to nitrogen deprivation. In total, 21 G-protein family members were identified in B. napus, encoding two Gα, six Gβ, and 13 Gγ. Sequence and phylogenetic analyses showed that although genome-wide triploid events increased the number of genes encoding Gα, Gβ, and Gγ subunits, the gene structure and protein properties of the genes encoding each G-protein subunit were extremely conserved. Collinearity analysis showed that most G-protein genes in B. napus had syntenic relationships with G-protein members of Arabidopsis, Brassica rape (B. rapa), and Brassica oleracea (B. oleracea). Expression profile analysis indicated that Gα and C-type Gγ genes (except BnGG10 and BnGG12 were highly expressed in flower and ovule) were barely expressed in most organs, whereas most Gβ and A-type Gγ genes tended to be highly expressed in most organs. G-protein genes also showed various expression patterns in response to nitrogen-deficient conditions. Under nitrogen deficiency, Gα and five C-type Gγ genes were upregulated initially in roots, while in leaves, Gα was downregulated initially and five C-type Gγ genes were highly expressed in different times. These results provide a complex genetic dissection of G-protein genes in B. napus, and insight into the biological functions of G-protein genes in response to nitrogen deficiency.     

Influence of processing condition and carbon nanotube on mechanical properties of injection molded multi‐walled carbon nanotube/poly(methyl methacrylate) nanocomposites

In this work, multi‐walled carbon nanotubes (MWCNT) and poly(methyl methacrylate) (PMMA) pellets were compounded via corotating twin‐screw extruder. The produced MWCNT/PMMA nanocomposite pellets were injection molded. The effect of MWCNT concentration, injection melt temperature and holding pressure on mechanical properties of the nanocomposites were investigated. To examine the mechanical properties of the MWCNT/PMMA nanocomposites, tensile test, charpy impact test, and Rockwell hardness are considered as the outputs. Design of experiments (DoE) is done by full factorial method. The morphology of the nanocomposites was performed using scanning electron microscopy (SEM). The results revealed when MWCNT concentration are increased from 0 to 1.5 wt %, tensile strength and elongation at break were reduced about 30 and 40%, respectively, but a slight increase in hardness was observed. In addition, highest impact strength belongs to the nanocomposite with 1 wt % MWCNT. This study also shows that processing condition significantly influence on mechanical behavior of the injection molded nanocomposite. In maximum holding pressure (100 bar), the nanocomposites show highest tensile strength, elongation, impact strength and hardness. According to findings, melt temperature has a trifle effect on elongation, but it has a remarkable influence on tensile strength. In the case of impact strength, higher melt temperature is favorable. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43738.     

Spatial distribution and habitat characterization of schistosomiasis host snails in lake and land habitats of western Kenya

Intermediate host snails of schistosomiasis were surveyed in this study to determine their abundance and distribution in the lake and land aquatic habitats of Lake Victoria basin of Kenya. Several sites were sampled at eight locations, both in the lake and on the land. The habitat and/or vegetation type (i.e. open water, hippo grass, hyacinth, ambatch trees, other vegetation, stream, swamp, pond, dam) of the sampled aquatic sites within the locations were also differentiated, water physicochemical parameters were determined, and the abundance of different species or taxa of phytoplankton and zooplankton were enumerated and correlated with the abundance of schistosomiasis snails in the sites. The results indicated significantly more Biomphalaria sudanica snails than Bulinus africanus snails in different physical habitats on land (Student's t‐test, P < 0.05), as well as in different locations on land (Student's t‐test, P = 0.026). Regression analyses revealed that several physicochemical parameters, including dissolved oxygen (R² = ?0.659; n = 8; P = 0.014), pH (R² = 0.728; n = 8; P = 0.007) and turbulence (R² = ?0.616; n = 8; P = 0.02), were predictive of Biomphalaria spp. abundance, while pH (R² = 0.610; n = 8; P = 0.02) and turbulence (R² = ?0.578; n = 8; P = 0.028) were predictive of Bulinus spp. abundance in different locations in the lake. Cyanobacteria (R² = 0.638; n = 8; P = 0.02) and chlorophyceae (R² = ?0.50; n = 8; P = 0.05) were shown to be predictive of both Biomphalaria spp. and Bulinus spp. abundance in different locations in the lake. Zooplankton abundance varied significantly between different locations in the lake (One‐way anova , P < 0.001). Bosmina spp. were found to be predictive of both Biomphalaria spp. (R² = ?0.627; n = 8; P = 0.01) and Bulinus spp. (R² = ?0.50; n = 8; P = 0.05) in different locations in the lake. The results from this study will help inform policy regarding control measures for schistosomias and intermediate snail hosts in Lake Victoria waters, as well as in adjacent terrestrial aquatic habitats and even beyond.     

Formal probabilistic analysis of a surgical robot control algorithm with different virtual fixtures

Surgical robots are increasingly being used in operation theaters involving normal or laparoscopic surgeries. The working of these surgical robots is highly dependent on their control algorithms, which require very rigorous analysis to ensure their correct functionality due to the safety-critical nature of surgeries. Traditionally, safety of control algorithms is ensured by simulations, but they provide incomplete and approximate analysis results due to their inherent sampling-based nature. We propose to use probabilistic model checking, which is a formal verification method, for quantitative analysis, to verify the control algorithms of surgical robots in this paper. As an illustrative example, the paper provides a formal analysis of a virtual fixture control algorithm, implemented in a neuro-surgical robot, using the PRISM model checker. In particular, we provide a formal discrete-time Markov chain-based model of the given control algorithm and its environment. This formal model is then analyzed for multiple virtual fixtures, like cubic, hexagonal and irregular shapes. This verification allowed us to discover new insights about the considered algorithm that allow us to design safer control algorithms.     

Halogen lamp rapid thermal annealing of Si- and Be-implanted In0.53Ga0.47As

Halogen lamp rapid thermal annealing was used to activate 100 keV Si and 50 keV Be implants in In_0.53Ga_0.47As for doses ranging between 5 × 10¹²−4 × 10¹⁴ cm⁻². Anneals were performed at different temperatures and time durations. Close to one hundred percent activation was obtained for the 4.1 × 10¹³ cm⁻² Si-implant, using an 850° C/5 s anneal. Si in-diffusion was not observed for the rapid thermal annealing temperatures and times used in this study. For the 5 × 10¹³ cm⁻² Be-implant, a maximum activation of 56% was measured. Be-implant depth profiles matched closely with gaussian profiles predicted by LSS theory for the 800° C/5 s anneals. Peak carrier concentrations of 1.7 × 10¹⁹ and 4 × 10¹⁸ cm⁻³ were achieved for the 4 × 10¹⁴ cm⁻² Si and Be implants, respectively. For comparison, furnace anneals were also performed for all doses.     

Study of carbon dioxide condensation in chevron plate exchangers; heat transfer analysis

The experimental investigation of carbon dioxide condensation in brazed plate heat exchangers is the main objective of this study. The current level of concern for the environment is at an all time high, therefore, it is important to look into methods and resources that lead to a cleaner and healthier future for the planet. This study details one such effort to reach this goal, focusing on condensation of carbon dioxide as a natural refrigerant in refrigeration systems. Three brazed plate heat exchangers with different geometry, each consisting of three channels, are tested. This paper focuses on the two-phase analysis, where carbon dioxide was the working fluid, flowing through the middle channel, and dynalene brine, the cooling fluid, flowed through the side channels of each geometry. Condensation of carbon dioxide occurred at saturation temperatures ranging from ?17.8 °C to ?34.4 °C and heat fluxes spanning 2.5–15.7 kW/m². An in-depth dimensional analysis was completed on the two-phase data yielding heat transfer correlations. Relationships of the two-phase heat transfer characteristics are presented, the data are compared with related studies, and conclusions are made from the two-phase data.     

The Influence of Oxygen Volumetric Mass Transfer Rates on Cyclodextrin Glycosyltransferase Production by Alkaliphilic Bacillus circulans in Batch and Fed-Batch Cultivations

In this work, the influence of oxygen mass transfer rates on the production of cyclodextrin glycosyltransferase (CGTase) by the alkaliphilic bacterium Bacillus circulans ATCC 21783 was investigated. Experimental design and response surface methodology were applied to optimize agitation speed and air flow rate in batch cultivations, in order to identify their significant effects and interactions with the synthesis of CGTase. Results were expressed as the volumetric mass transfer rates of oxygen (k_la, [per hour]). The maximal CGTase productivity of 155 U mL⁻¹ h⁻¹ was achieved with k_la of 48 h⁻¹. CGTase production was also studied in fed-batch cultures using the optimized parameters obtained in the batch experiments. The maximal CGTase productivity on fed-batch cultivations was 137 U mL⁻¹ h⁻¹ with feeding rates of starch at 0.17 g L⁻¹ h⁻¹.