2.5GHz低相位噪声CMOS LC VCO的设计

用0 .35μm、一层多晶、四层金属、3.3V的标准全数字CMOS工艺设计了一个全集成的2 .5 GHz L C VCO,电路采用全差分互补负跨导结构以降低电路功耗和减少器件1/ f噪声的影响.为了减少高频噪声的影响,采用了在片L C滤波技术.可变电容采用增强型MOS可变电容,取得了2 3%的频率调节范围.采用单个16边形的对称片上螺旋电感,并在电感下加接地屏蔽层,从而减少芯片面积,优化Q值.取得了在离中心频率1MHz处- 118d Bc/ Hz的相位噪声性能.电源电压为3.3V时的功耗为4 m A.     

CMOS光接收机主放大器设计

利用CMOS工艺设计一种用于SDH STM 4速率级(622 Mb/s)光纤用户网的光接收机放大电路。此电路由输入/输出缓冲、主放大单元、偏置补偿电路4部分组成。通过直接耦合技术提高增益,降低功耗;利用有源电感负载提高系统带宽。采用商用SmartSpice电路仿真软件和CSMC HJ 0.6μm工艺参数对该电路进行仿真。结果表明,该电路在5 V工作电压下中频增益为81 dB,3 dB带宽为470 MHz。     

有互感和电源的电容耦合电路的量子涨落

通过正则变换和幺正变换的方法研究了有互感和电源存在的情况下的介观电容耦合电路的量子涨落。结果表明电荷和电流的量子涨落与电源无关。当电路元件确定时，如果L1／L2的值很大或很小，耦合对涨落的影响很大。互感从有到无的过程中，回路1中电流的涨落和回路中2中电荷的涨落有明显的变化。换句话说，互感的有无对涨落的大小起着举足轻重的作用。     

5Gb/s 0.25μm CMOS限幅放大器

采用TSMC 0.25μm CMOS技术设计实现了高速低功耗光纤通信用限幅放大器.该放大器采用有源电感负载技术和放大器直接耦合技术以提高增益,拓展带宽,降低功耗并保持了良好的噪声性能.电路采用3.3V单电源供电,电路增益可达50dB,输入动态范围小于5mVpp,最高工作速率可达7Gb/s,均方根抖动小于0.03UI.此外核心电路功耗小于40mW,芯片面积仅为0.70mm×0.70mm.可满足2.5,3.125和5Gb/s三个速率级的光纤通信系统的要求.     

Still No Evidence for Perfect Timesharing With Two Ideomotor-Compatible Tasks: A Reply to Greenwald (2003).

For 30 years, A. G. Greenwald and H. G. Shulman's (1973) psychological refractory period (PRP) study has been cited as evidence for perfect timesharing with ideomotor (IM)-compatible tasks. Recently, M.-C. Lien, R. W. Proctor, and P. A. Allen (2002) failed to replicate these results and concluded that IM compatibility is neither necessary nor sufficient to eliminate the PRP effect. A. G. Greenwald (2003) attributed Lien et al.'s nonreplication to the use of (a) a non-IM-compatible task, (b) varied trial spacing, and/or (c) inappropriate instructions. The authors of the present article argue that the first 2 factors are not critical and that instructions merely affect the criterion for speed versus accuracy. In each of Greenwald's experiments, dual-task costs were evident on response time or error rates. Furthermore, the small dual-task costs in his study are consistent with a bottleneck model. Thus, Greenwald (2003) does not provide evidence that IM-compatible tasks enable perfect timesharing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Mutual recognition of the results of measurements and tests and formation of a world-wide metrology system

The main prerequisites are considered in a historical aspect and steps ate taken in creating a world-wide metrology system with the aim of providing conditions for the mutual recognition of measurement results. __________ Translated from Izmeritel’naya Tekhnika, No. 11. pp. 59–62, November, 2007.     

疲劳/蠕变复合作用下聚苯乙烯的交互损伤研究

探讨了在疲劳／蠕变复合作用下聚苯乙烯的损伤交互作用，结果表明，在疲劳／蠕变复合作用下聚苯乙烯存在疲劳和蠕变的交互损伤，其断裂寿命比纯疲劳或纯蠕变的断裂寿命低；断裂机制是疲劳循环载荷松动和活化了分子链或链段，从而促进蠕变运动和断裂，并且，疲劳／蠕变的交互损伤程度与温度密切相关。     

岩滩水电站由220KV升压为500KV运行

岩滩水电站升压一次成功，本文简要叙述岩滩水电站升压的各项工作和主要设备的安装试验情况。     

薄膜微型电源

介绍了新型的薄膜微型电源的工作原理、结构及制造工艺。     

Compact equivalent circuit model of two‐layer spiral inductors

A compact lumped‐element equivalent circuit model of two‐layer integrated spiral inductors on silicon substrates is developed in this article. Based on this proposed model, excellent agreements are achieved between the measured and simulated S‐parameters for different inductors. Also, both self‐ and mutual inductances of two‐layer inductors are accurately extracted, and their overall performances are understood clearly. © 2003 Wiley Periodicals, Inc. Int J RF and Microwave CAE 13: 148–153, 2003.