由制碱废渣制脱硫吸收剂配比优选的研究

文章探讨了由制碱废渣和电石渣混合制取脱硫吸收剂 ,不同混合比例对吸收剂的比表面积、脱硫能力的影响 ,从而确定最佳配比方案     

THE PREPARATION AND CHARACTERISTICS STUDY OF TiNxOy SPECTRAL SELECTIVE ABSORBING FILM BY MAGNETRON SPUTTERING

Spectral selective absorbent film is a crucial factor for the solar heating device. There are many kinds of spectral selective absorbing film made by different ways. TiNxOy thin film with excellent spectral selecting absobent property were successfully prepared by DC magnetron sputtering with Ar as working gas, N2 and O2 as reactive gas, 99.9% titanium as the target and is copper slice as the substrate. In this article, the optical characteristics and microstructure of TiNxOy thin film were studied. Inputing O2 can decrease the reflection of the visible lights, and double layer film can get good absorption for solar energy.     

高吸水树脂研究进展

综述了高吸水树脂的制备、结构及吸水机理,介绍了高吸水树脂国内外发展现状及其在各方面的应用,并提出了目前的主要研究趋势。     

高吸水聚合物材料在防沙治沙中的应用

介绍了高吸水聚合物的发展状况、吸水机理和性能特征，总结了合成高吸水聚合物及半合成高吸水聚合物的技术条件及若干种制备方法，并提出利用低成本植物纤维素（取自植物落叶、农作物茎杆等）、淀粉等天然原材料来制备高吸水性聚合物；探讨了以高技术、低成本、大面积可实施及效果显著为技术优势，利用高吸水聚合物进行荒漠和沙漠治理的方法和发展方向。     

高吸水性树脂的性能及应用

综述了高吸水性树脂的性能及其应用，并预测其广阔的开发前景。     

生态型高吸水性树脂的研究

从高吸水性树脂的化学结构出发，论述了树脂的降解机理和降解方法，归纳和评述了近期我国在可降解天然聚合物、丙烯酸接枝共混和丙烯酸（盐）合成聚合物方向的研究，并对未来作出展望。     

紫外线吸收剂2，2，，4-三羟基二苯甲酮的合成

以水杨酸和间苯二酚为原料,无水氯化锌为催化剂,氯苯为溶剂,通过Friedel-Crafts反应合成了紫外线吸收剂2,2’,4-三羟基二苯甲酮。考察了反应温度、时间、原料配比对产品收率的影响。结果表明:在n(间苯二酚)∶n(水杨酸)=1∶1.2、反应温度120℃、反应时间3h的条件下,收率90%;产物经红外光谱、紫外光谱进行了表征,证明为二苯甲酮类物质,可用做紫外线吸收剂。     

羧甲基纤维素接枝丙烯酰胺高吸水树脂的制备

以羧甲基纤维素、丙烯酰胺为原料,采用氧化还原引发体系,通过自由基接枝共聚制备了高吸水树脂,分别考察了原料配比、引发剂浓度、交联剂浓度、聚合温度、树脂粒径等因素对高吸水树脂吸收能力的影响,确定了最佳制备条件.     

超强吸水性树脂的制备及吸水性能研究

合成了以丙三醇为交联剂的聚丙烯酸类高分子吸水剂,讨论了丙三醇作交联剂时,引发剂用量、 交联剂用量、中和度、反应温度及时间对树脂吸水能力的影响。所制树脂吸水率达800g/g。对0.9％食盐水吸水 率最大为70g/g。     

Preparation of zinc ferrite in the presence of carbon material and its application to hot-gas cleaning

In order to develop an efficient absorbent of H₂S in coal gasification, zinc ferrite (ZnFe₂O₄) was prepared in the presence of carbon materials such as activated carbon (AC), activated carbon fiber (ACF), and Yallourn coal (YL). The absorption behavior of absorbents for H₂S was examined using a fixed-bed flow type reactor equipped with a quadrupole mass spectrometer.Carbon material-supported ZnFe₂O₄ exhibited larger desulfurization capacity for H₂S than unsupported ferrites. They could efficiently remove H₂S from 4000 ppm levels in a simulated coal gasification gas to less than 1 ppm at 500 °C. The absorption capacity of H₂S with ZnFe₂O₄/AC, ZnFe₂O₄/ACF, and ZnFe₂O₄/YL exhibited nearly 100% of stoichiometric amount of loaded metal species. They could be regenerated by an air oxidation in O₂-Ar (50 vol%) at 450 °C for 30 min. The regenerated ferrite can be used for repeated absorption of H₂S with a very slight decrease in the absorption capacity.