β21s高强度钛合金的铣削试验研究

针对一种新型的难加工钛合金材料β21s,进行了刀具磨损试验和铣削力的测量试验,对材料的切削加工性进行评价,并且给出优选结果,为实际生产提供参考。     

Potential of vibro-milling technique for preparation of electroceramic nanopowders

The potential of the vibro-milling technique as a simple method to obtain usable quantities of single-phase electroceramic powders with nanosized particles was examined. A detailed study considering the role of both milling time and firing condition on phase formation and particle size of the final product was performed. The calcination temperature for the formation of the desired phase was lower when longer milling times have been applied. More importantly, by employing an appropriate choice of the milling time and calcination condition, high purity electroceramic nanopowders have been successfully prepared with a simple solid-state reaction method.     

Decision-based process planning for wire and arc additively manufactured and machined parts

The conventional manufacturing of aircraft components is based on the machining from bulk material and the buy-to-fly ratio is high. This, in combination with the often low machinability of the materials in use, leads to high manufacturing costs. To reduce the production costs for these components, a process chain was developed, which consists of an additive manufacturing process and a machining process. To fully utilize the process chain’s capabilities, an integrated process planning approach is necessary. As a result, the work sequence can be optimized to achieve the economically most suitable sequence. In this paper, a method for a joint manufacturing cost calculation and subsequent decision-based cost minimization is proposed for the wire and arc additive manufacturing (WAAM) & milling process chain. Furthermore, the parameters’ influence on the results and the magnitude of their influence are determined. These results make it possible to design an economically optimal work sequence and to automate the process planning for this process chain.     

Influence of radial and axial runouts on surface roughness in face milling with round insert cutting tools

In face milling processes, the surface quality of the machined part depends on many factors, including feed, cutting tool geometry and tool errors. In this work, a numerical model for predicting the surface profile and surface roughness as a function of these factors is presented, incorporating a random values generation algorithm that makes it possible to determine the variation in surface roughness from the values that can be adopted by tool errors. This work is focused on round insert cutting tools and the influence of tool errors such as radial and axial runouts. The results that correspond to a number of teeth equal to 4, insert diameter of 12 mm, depth of cut of 0.5 mm, cutting speed of 120 m/min and feed of 0.4–1.4 mm/rev are analysed. Milling experiments are made to verify the validity of the model and the discrepancies between the experimental and theoretical surface profiles are assumed to be a consequence of different factors such as the variation in undeformed chip thickness along the surface profile.     

Cutting force estimation in sculptured surface milling

Cutting force milling models developed up to now are mostly used for planar milling using end-mills. Only a reduced number of models applying ball-end mills have been developed. Furthermore these models usually only consider horizontal surface machining, even though the main application of ball-end mills is sculptured surface machining. This article proposes a model that is able to estimate the cutting forces in inclined surfaces machined both up-milling and down-milling. For this purpose a semi-mechanistic model has been developed that calculates the cutting forces based on a set of coefficients which depend on the material, the tool, the cutting conditions, the machining direction and the slope of the surface.A coordinate transformation has been included in order to consider the slope milling case with different cutting directions.The model has been tested on two materials, an aluminum alloy Al7075-T6 and a 52 HRC tool steel AISI H13. Validation tests have been carried out on inclined planes using different slopes and different machining directions.The results provide errors below 10% in most of the cases and both the value and shape of the predicted forces adjust the measured cutting force.     

An improved cutting force and surface topography prediction model in end milling

During the milling operation, the cutting forces will induce vibration on the cutting tool, the workpiece, and the fixtures, which will affect the surface integrity of the final part and consequently the product's quality. In this paper, a generic and improved model is introduced to simultaneously predict the conventional cutting forces along with 3D surface topography during side milling operation. The model incorporates the effects of tool runout, tool deflection, system dynamics, flank face wear, and the tool tilting on the surface roughness. An improved technique to calculate the instantaneous chip thickness is also presented. The model predictions on cutting forces and surface roughness and topography agreed well with experimental results.     

浅谈子程序在数控铣教学中的应用

子程序是数控编程过程中的一种常用功能,灵活使用子程序技术,可以减少编程时的程序量,增强数控机床的功能。本文针对子程序调用技术在数控铣床教学中的几种常用方法进行探讨与研究,希望对同行起一个抛砖引玉的作用。     

An Innovative Methodology for the Performance Evaluation of Coated Cemented Carbide Inserts in Milling of Inconel 718

The performance of cemented carbide inserts coated with various PVD-films in milling Inconel 718 is evaluated by innovative analytical and experimental methods. Three PVD films with different micro and macro structures were applied. The coatings’ strength properties were detected by nanoindentations and by impact tests at various temperatures. These results were considered in FEM calculations of the material removal process to determine the mechanical and thermal loadings of the cutting wedge. Employing this innovative methodology, it is possible to capture proactively the effect of the cutting conditions on tool wear, thus reducing the effort dedicated in traditional sequential cutting experimentation.     

直齿圆锥齿轮精锻模电极齿轮的化铣修形技术

研究了化学铣切方法在直齿圆锥齿轮精锻模电极齿轮的齿顶修边、齿宽鼓形加工和降低表面粗糙度等方面应用的技术，应用该技术可提高精锻齿轮精度1～2级。     

精铣缸体顶面、精镗缸孔及止口数控自动线的研制

文章阐述了用数控自动线精铣缸体顶面、精镗缸孔及止口的设计依据和工艺方案，并对自动线的布局及采用的浮动式精密镗削头、滑台式精密铣削头、数控三导轨机械滑台、自动补偿镗杆、数控系统等关键部件的结构、原理及功能做了详细的介绍。该自动线的研制，解决了单机加工效率低、国内用户只能依赖进口设备的关键技术问题。