继电器微机检测装置的软件设计

继电器作为主要电气元件之一，广泛应用于各个领域。对继电器的检测主要包括机械参数和电气参数的检测。电气参数由于其项目多，实现微机测试比较困难，据此，开发了电磁继电器电参数的自动测试装置，本文仅介绍其软件设计。     

Studies on high density polyethylene (HDPE) functionalized by ultraviolet irradiation and its application

The structure and properties of high density polyethylene (HDPE) functionalized by ultraviolet irradiation at different light intensities in air were studied by electron analysis, FTIR spectroscopy, contact angle with water, differential scanning calorimetry and mechanical properties measurement. The results show that oxygen‐containing groups such as C?O, C—O and C(?O)O were introduced onto the molecular chain of HDPE following irradiation, and the rate and efficiency of HDPE functionalization increased with enhancement of irradiation intensity. After irradiation, the melting temperature, contact angle with water and notched impact strength of HDPE decreased, the degree of crystallinity increased, and their variation amplitude increased with irradiation intensity. Compared with HDPE, the yield strength of HDPE irradiated at lower light intensity (32 W m^?2 and 45 W m^?2) increases monotonically with irradiation time, and the yield strength of HDPE irradiated at higher light intensity (78 W m^?2) increases up to 48 h and then decreased with further increase in irradiation time. The irradiated HDPE behaved as a compatibilizer in HDPE/polycarbonate (PC) blends, and the interface bonding between HDPE and PC was ameliorated. After adding 20 wt% HDPE irradiated at 78 W m^?2 irradiation intensity for 24 h to HDPE/PC blends, the tensile yield strength and notched Izod impact strength of the blend were increased from 26.3 MPa and 51 J m^?1 to 30.2 MPa and 158 J m^?1, respectively. Copyright © 2003 Society of Chemical Industry     

超细Fe3O4粒子表面包覆酞菁钴性质研究

本文研究了合成载氧体的金属有机化学液相淀积法制造工艺，所得产物经ＴＥＭ、ＸＰＳ、Ｍｏｓｓ－ｂａｕｅｒ谱和Ｂ－Ｈ仪等手段，研究了它的结构和磁性能。实验表明，酞青钴以薄层形式包覆在Ｆｅ＿３Ｏ＿４的表面，封闭了Ｆｅ＿３Ｏ＿４的表面孔洞，稳定了Ｆｅ＿３Ｏ＿４的物相，增强了磁性能。     

PC104在工程中的应用

根据在宝钢铁水动态监测系统中使用PC104的经验,介绍了选用PC104的优点,同时,介绍了在工程实际中使用PC104的一些具体用法,对从事嵌入式应用开发者使用PC104具有一定的参考价值。     

DSP与PC间的数据通讯

DSP由于具有高性能和灵活可编程的优点而得到广泛的应用。文章给出了用PC机作主机 ,DSP作从机来实现DSP与PC机间有效、可靠通讯的实现方法。同时通过一个数据传输程序的例子来详细阐述如何使用VB6.0专业版作为开发工具 ,并利用DSP中的SCI(SerialCommunicationInter face)模块来实现DSP与微机间的数据传递方法。     

河北冶金实验厂8MN快锻液压机电控系统选择

着重阐述了河北冶金实验厂８ＭＮ快锻液压机电控系统的选择过程。经过反复考察，论证，对比，最终所选的压机电控系统为目前国产快锻液压机中自动化水平最高的锻造设备。     

HIPS-g-MA共聚物对HIPS/PC共混物相容性、形态和拉伸性能的影响

研究了HIPS／PC共混物的相容性及HIPS－MA对HIPS（30）／PC（70）共混物的相容性、形态和拉伸性能的影响。DSC研究结果表明，HIPS／PC共混物中PS的玻璃化转变温度（Tg)不随组成而变化，而PC的Tg随其质量分数的降低逐渐向低温移动，说明HIPS／PC是部分相容体系。通过DSC、扫描电镜形态观察和拉伸性能测试结果发现，当HIPS－g-MA的含量低于7．5％时，共混物的相容性改善不明显，当其含量达到7．5％时，对共混物有明显的乳化作用，说明饱和的界面浓度在7．5％左右。HIPS－g-MA接枝共聚物在HIPS（30）／PC（70）共混物中的增容作用可能是酯交换反应原位生成的嵌段共聚物所致。     

PC／PET共混物的非等温结晶动力学

采用等速变温ＤＳＣ法对ＰＣ／ＰＥＴ共混体系的非等温结晶动力学进行了研究，结果表明，从玻璃态结晶时，随着ＰＣ含量的增加，ＰＥＴ组分的结晶速率先增加后降低。耐从熔体结晶时，体系的结晶速率随着ＰＣ含量的增加而增加，讨论了ＰＣ对ＰＥＴ组分结晶过程的影响。     

ABS／PC／MMA类共聚物Q三元共混体系的性能和形态

本文研究了ABS/PC甲基丙烯酸甲酯(MMA)共聚物Q三元共混物的性能与Q含量的关系,对不同Q含量下共混物的拉伸、冲击、弯曲、耐热、熔体指数等性能进行了测试,并用扫描电镜观察了该三元共混物的形态。结果表明,加入共聚物Q可增加共混体系的相容性,在适当组成下可使共混物的弯曲强度提高到原来的1.7倍,同时其他力学性能有所提高或不受损失;共混物的熔体指数能符合工业生产要求。从经济角度看,Q价格也较低。因而ABS/PC/Q三元共混物可望开发为具有重要实际意义的塑料合金。     

某跨线桥施工支架方案设计

结合某大桥的概况,根据梁体施工工艺要求、现场实地勘察情况确定跨线施工方案,支架采用布架灵活、搭拆方便、承载力大的WDJ碗扣式多功能钢支架,部分预应力现浇连续箱梁采用支墩加纵梁预留门洞的支架现浇,取得良好效果。