Designing amorphous formulations of polyphenols with naringin by spray-drying for enhanced solubility and permeability

Naringin (NAR), a major flavanone (FVA) glycoside, is a component of food mainly obtained from grapefruit. We used NAR as a food additive to improve the solubility and permeability of hydrophobic polyphenols used as supplements in the food industry. The spray-dried particles (SDPs) of NAR alone show an amorphous state with a glass transition temperature (T_g) at 93.2 °C. SDPs of hydrophobic polyphenols, such as flavone (FVO), quercetin (QCT), naringenin (NRG), and resveratrol (RVT) were prepared by adding varying amounts of NAR. All SDPs of hydrophobic polyphenols with added NAR were in an amorphous state with a single T_g, but SDPs of hydrophobic polyphenols without added NAR showed diffraction peaks derived from each crystal. The SDPs with NAR could keep an amorphous state after storage at a high humidity condition for one month, except for SDPs of RVT/NAR. SDPs with NAR enhanced the solubility of hydrophobic polyphenols, especially NRG solubility, which was enhanced more than 9 times compared to NRG crystal. The enhanced solubility resulted in the increased membrane permeability of NRG. The antioxidant effect of the hydrophobic NRG was also enhanced by the synergetic effect of NAR. The findings demonstrated that NAR could be used as a food additive to enhance the solubility and membrane permeability of hydrophobic polyphenols.     

Design of novel urogenital pharmabiotic formulations containing lactobacilli,salivaricin CRL 1328 and non-microbial compounds with different functionalities

Context: The administration of pharmabiotics is a promising alternative to antimicrobial drugs for the treatment and/or prevention of female urogenital infections.

Objective: To design pharmabiotic formulations including bioactive ingredients of microbial origin combined with non-microbial substances and then to evaluate the stability of the combinations during freeze-drying and storage.

Materials and methods: Different formulations including Lactobacillus gasseri CRL 1263, Lactobacillus salivarius CRL 1328, salivaricin CRL 1328 (a bacteriocin) and non-microbial compounds (lactose, inulin and ascorbic acid) were assayed, and the ingredients were freeze-dried together or separately. The formulations were stored in gelatin capsules at 4?°C for 360?d.

Results: The viability of lactobacilli was affected to different extents depending on the strains and on the formulations assayed. L. salivarius and ascorbic acid were successfully combined only after the freeze-drying process. Salivaricin activity was not detected in formulations containing L. gasseri. However, when combined with ascorbic acid, lactose, inulin or L. salivarius, the bacteriocin maintained its activity for 360?d. The selected microorganisms proved to be compatible for their inclusion in multi-strain formulations together with lactose, inulin and ascorbic acid. Salivaricin could be included only in a L. salivarius CRL 1328 single-strain formulation together with non-microbial substances.

Conclusions: This study provides new insights into the design of urogenital pharmabiotics combining beneficial lactobacilli, salivaricin CRL 1328 and compounds with different functionalities.     

Simultaneous determination of mycotoxin in commercial coffee

Mycotoxins are secondary metabolites produced by filamentous fungi that usually contaminate food products. Coffee is a natural product susceptible to mycotoxin contamination. The present study evaluates the presence of nivalenol, deoxynivalenol, T-2 and HT-2 Toxin, diacetoxyscirpenol, aflatoxin B₁, aflatoxin B₂, aflatoxin G₁, aflatoxin G₂, fumonisin B₁, fumonisin B₂, ochratoxin A, zearalenone, enniatin A, enniatin A₁, enniatin B, enniatin B₁, and beauvericin in coffee samples, using liquid chromatography tandem mass spectrometry (LC-MS/MS). The results show that zearalenone was not present in any sample. In the positive samples the contents of fumonisins ranged from 58.62 to 537.45 μg/kg, emerging mycotoxins ranged from 0.10 to 3569.92 μg/kg, aflatoxins ranged from 0.25 to 13.12 μg/kg, and trichothecenes, excepting nivalenol, ranged from 5.70 to 325.68 μg/kg. Nivalenol presented the highest concentrations, from 0.40 to 25.86 mg/kg. Ochratoxin A ranged from 1.56 to 32.40 μg/kg, and five samples exceeded the maximum limit established by the European Commission.     

MEG钻井液在吐哈油田小井眼侧钻井中的应用

吐哈油田小井眼开窗侧钻井主要采用混原油钻井液,不利于环境保护。从研究MEG单体的作用机理入手,以钻井液润滑性、抑制防塌性为主要评价指标,对MEG钻井液配方进行了优选,并对优选配方钻井液性能进行了评价。该钻井液在4口小井眼开窗侧钻井进行了试验应用。结果表明:应用井无阻、卡现象,平均钻井周期缩短了7.2d;在未混原油的情况下钻井液润滑系数比乳化原油(15%~20%)钻井液降低了34.6%;油层保护效果好,其中温5-41C井日产油14.4t,同比温五区块平均产量提高了128.4%,神218C井是神229区块目前唯一的自喷井。表明优选出的MEG钻井液具有优良的润滑性、抑制防塌性及良好的储层保护效果,特别适合强水敏地层及大斜度井和水平井等特殊复杂工艺井的钻进。     

Natural occurrence of Fusarium toxins in peanut,sorghum and maize from Mysore (India)

Peanut, sorghum and maize samples were collected from the wholesale market in Mysore, India, over a period of one year (October 1984 to September 1985). The samples were analysed for the natural occurrence of T-2 toxin (T-2), diacetoxyscirpenol (DAS) and zearalenone by thin-layer chromatography, dermal toxicity test and gas chromatography. Of the total number of peanut samples analysed, 6.9% were positive for the toxic trichothecene(s) (T-2, up to 38.89 mg kg^?1; DAS, up to 2.03 mg kg^?1); 4.8% of total sorghum samples analysed contained T-2 up to 15 mg kg^?1. Zearalenone was not found in any of the samples tested, and no toxins were detected in any of the maize samples. Samples marketed during winter and summer periods were contaminated with the toxins. All the toxin-positive samples except one peanut sample were found in produce stored for more than a week.     

85W／90卡车手动变速箱油的研制

介绍８５Ｗ／９０卡车手动变速箱油的组分和添加剂，提出符合８５Ｗ／９０粘度级别的基础油，讨论影响８５Ｗ／９０卡车手动变速箱油性能的各种因素，给出符合８５Ｗ／９０卡车手动变速箱油规格的油品配方。     

Lower bound limit analysis using non‐linear programming

This paper describes a new formulation, based on linear finite elements and non‐linear programming, for computing rigorous lower bounds in 1, 2 and 3 dimensions. The resulting optimization problem is typically very large and highly sparse and is solved using a fast quasi‐Newton method whose iteration count is largely independent of the mesh refinement. For two‐dimensional applications, the new formulation is shown to be vastly superior to an equivalent formulation that is based on a linearized yield surface and linear programming. Although it has been developed primarily for geotechnical applications, the method can be used for a wide range of plasticity problems including those with inhomogeneous materials, complex loading, and complicated geometry. Copyright © 2002 John Wiley & Sons, Ltd.     

Mixed formulation of nonlinear beam on foundation elements

This paper presents an inelastic element for the analysis of beams on foundations. The element is derived from a two-field mixed formulation with independent approximation of forces and displacements. The state determination algorithm for the implementation of the element in a general purpose nonlinear finite element analysis program is presented and its stability characteristics are discussed. Numerical studies are performed to compare the model with the classical displacement formulation. The studies confirm the superiority of the proposed model in describing the inelastic behavior of beams on foundations.     

Managing information technology in the nineties

Business, not technology leaders should manage the change of Information Technology (IT) from a self-contained business support unit of the sixties to a distributed strategic business function of the nineties. Top management should recognize that a good business plan can only be developed and executed through the partnership between the business unit managers and the managers of the financial, the personnel, and the IT resource units. The technical problems associated with the management of IT may again be the easier part of the total management challenge.     

Targeting optimum resource allocation using reverse problem formulations and property clustering techniques

Decoupling the constitutive equations from the balance and constraint equations allows for reformulating a conventional forward problem into two reverse problems. The first reverse problem is the reverse of a simulation problem, where the process model is solved in terms of the constitutive (synthesis/design) variables instead of the process variables, thus providing the synthesis/design targets. The second reverse problem (reverse property prediction) solves the constitutive equations to identify unit operations, operating conditions and/or products by matching the synthesis/design targets. Visualization of the problem is achieved by employing recently developed property clustering techniques, which allows a high-dimensional problem to be visualized in two or three dimensions. The clusters by definition satisfy intra-stream and inter-stream conservation through linear “mixing” rules, which allows for the development of consistent additive rules along with their ternary representation.