Interfacial microstructure and mechanical properties of Ti3SiC2 ceramic and TC11 alloy joint diffusion bonded with a Cu interlayer

Reliable joints of Ti₃SiC₂ ceramic and TC11 alloy were diffusion bonded with a 50 μm thick Cu interlayer. The typical interfacial structure of the diffusion boned joint, which was dependent on the interdiffusion and chemical reactions between Al, Si and Ti atoms from the base materials and Cu interlayer, was TC11/α-Ti + β-Ti + Ti₂Cu + TiCu/Ti₅Si₄ + TiSiCu/Cu(s, s)/Ti₃SiC₂. The influence of bonding temperature and time on the interfacial structure and mechanical properties of Ti₃SiC₂/Cu/TC11 joint was analyzed. With the increase of bonding temperature and time, the joint shear strength was gradually increased due to enhanced atomic diffusion. However, the thickness of Ti₅Si₄ and TiSiCu layers with high microhardness increased for a long holding time, resulting in the reduction of bonding strength. The maximum shear strength of 251 ± 6 MPa was obtained for the joint diffusion bonded at 850 °C for 60 min, and fracture primarily occurred at the diffusion layer adjacent to the Ti₃SiC₂ substrate. This work provided an economical and convenient solution for broadening the engineering application of Ti₃SiC₂ ceramic.     

三相全控桥式整流电路实验装置的研制

介绍了开发三相全控桥式整流电路实验装置的背景;叙述了TC787芯片的内部结构、工作原理、特点及芯片的各个管脚的功能;详细介绍了该实验装置的触发电路的设计思路、设计结果和工作原理;介绍了该实验装置的主电路部分的结构和特点。该实验装置性能可靠,符合本科生实验要求。     

基于TC8830AF的智能语音卡结构与设计

本文描述一种基于８０３１单片机和ＴＣ８８３０ＡＦ语音处理器的ＰＣ机智能语音卡，通过软硬件设计解决了ＰＣ－８０３１－ＴＣ８８３０ＡＦ结构中的通讯问题。该语音卡在进行语音的合成、编辑和播放时，仅占用极少的ＰＣ机ＣＰＵ处理时间，能满足计算机系统进行实时语音合成的要求。     

UniMAT PLC在塑料挤出机控制系统中的应用

针对塑料挤出机控制系统成本高、速度低、精度低的问题,提出采用UniMATPLC控制方式,实践证明效果良好。     

Johnson-Cook dynamic constitutive relationship for TC 16 titanium alloy

The true stress--strain curves of TC16 alloy with a wide range of strain rates were investigated under uniaxial quasi-static tension and uniaxial dynamic compression with the lnstron 8032 test machine and the split Hopkinson bar respectively. The results indicate that the true stress increases with increasing strain rate, while decreases with increasing temperature. Under the 105 s^-1 high strain rate and temperature higher than 673 K, the true stress would even be less than that under quasi-static condition. A new method incorporating TCl6＇s stress strain curve developing item was proposed to determine the coefficients in J-C model easily and to avoid the estimation of the adiabatic temperature rising. The Johnson-Cook dynamic constitutive relationship for TC16 was obtained for the first time. Good agreement was obtained between the model prediction and the experimental stress--strain curves for TC16 under both quasi-static and dynamic loadings.     

钛合金中亚晶的电子显微镜观察

用透射电子显微镜观察了TC6钛合金在高温退火过程中形成的亚晶(Subgrain)。合金经850℃,920℃退火后炉冷和空冷,在初生α相晶粒内形成亚晶,多为成簇分布的狭长形状,亚晶的数量随退火后冷却速度的增加而减少。亚晶界(Subgrain boundary)是由位错构成的,亚晶的形成是多边化(polygonization)的结果。     

TC11钛合金中氧铝偏析与脆性断裂

借助ＳＥＭ及ＥＤＡＸ、ＡＥＳ对某些ＴＣ１１钛合金棒材机械性能差的原因进行了研究。。结果表明材料延伸率、断面收缩率及冲击值低，显微硬度值高的拉伸和冲击断口上都呈现脆性解理断裂的断裂源，源区显微组织为条状α及空洞，且氧铝偏高。氧铝偏高造成α＋β→β相变温度和再结晶温度升高，使加工变形中形成的条状α在随后的热处理中得不到改变，并导致拉伸、冲击时的脆性断裂     

TC4合金管材挤压成型工艺研究

研究了不同的挤压温度、挤压比和挤压速度等挤压参数对TC4合金管材挤压成型工艺的影响,以及润滑方式对TC4合金挤压管材表面的影响。研究结果表明,采用热挤压方式生产φ47mm×3mmTC4合金管材,挤压比应选在3￣10之间,挤压速度选在50￣120m/s,润滑剂用玻璃粉,可得到显微组织为两相加工组织,变形充分均匀,力学性能匹配良好,表面质量合格的TC4合金管材。本研究得到的TC4合金管材挤压成型工艺研究可用于工业化生产。     

基于GSM网络的汽车防盗系统研制

以STC89C52单片机和西门子公司的TC35I GSM模块为核心,设计了以手机短信实时监控汽车状态的防盗系统,实现了汽车的无线监控.     

高铁酸钾去除饮用水源中盐酸四环素试验研究

利用提纯后的次氯酸钠溶液、硝酸铁、氢氧化钾制备高铁酸钾。并采用高铁酸钾氧化去除水中盐酸四环素（TC）,初步探讨了高铁酸钾去除TC的效果,研究了高铁酸钾投加量、pH值、氧化时间等对去除效率的影响。结果表明,高铁酸钾可以有效快速地去除水中的TC,在一定范围内,高铁酸钾投加越多,TC去除率越高,反应越快。pH值对反应影响较大,最优pH值范围为9～10。降解反应主要发生在前60S,在之后的10-20min内高铁酸钾与TC持续反应,TC得到进一步的降解。当高铁酸钾与TC摩尔比为1：1和1：5时,反应60S后的TC去除率约为100％。但反应液TOC下降幅度不大,说明大部分的TC仅转化为中间产物,未得到彻底矿化。