Effects of Winding Attachment Positions on Output Characteristics of Flux‐Modulating Synchronous Machines

The flux‐modulating synchronous machine (FMSM) is a new type of multipole SM with nonoverlapping concentrated armature and field windings on the stator. This paper compares the output characteristics of two FMSMs through finite element analysis (FEA) and experiments. In both of the FMSMs, the attachment positions of the armature and field windings are swapped. To determine the reason for the discrepancies in their output characteristics, unsaturated inductances were calculated using a d‐‐q equivalent circuit. In addition, the calculated results of the inductances were confirmed through a visualization of the leakage fluxes using FEA. The results of the study show that the synchronous inductance can be reduced by attaching the armature winding to the air‐gap side of the stator teeth and that the reduction leads to an increase in output power.     

轴向磁场无铁心无刷永磁盘式电机的设计

介绍了轮用轴向磁场无铁心无刷永磁盘式电机的结构形式，探讨了这种新电机的设计特点，重点解决了电机主要尺寸确定和磁路分析计算问题，最后给出了一种磁极形状和线圈形状的优选方案。     

直流无刷电机驱动芯片LB11820M的原理及应用

LB11820M是日本SANYO(三洋)公司开发的三相直流无刷电机驱动芯片。它具备开环三相电机控制所需的全部有效功能，并且具有比较完善的保护电路。文中介绍了LB11820M的特点、功能和工作原理，给出了其典型应用电路。     

The principle and fundamental characteristics of brushless three-phase synchronous induction motor with two stators

Brushless three-phase synchronous motor involving a rotating ac exciter on the same shaft as the motor and with the windings linked through a shaft-mounted rectifier is widely used as medium and large capacity machines. However, the motor needs to fit with damping windings for self-starting outside of the field winding in the rotor and needs to equip discharge resistance with complex electronic device to dispose of electromagnetic force induced in the field winding at starting. Therefore, the rotor structure is very complex, and there are disadvantages, especially for the robust and highly reliable motor that is desired. To solve the problem found in traditional motors, the authors proposed a brushless three-phase synchronous induction motor with two stators and one wound rotor. This problem is solved because the proposed motor is of two-stators structure: the rotor winding operates as a secondary winding of induction motor at starting and as the field winding at synchronous operation. The motor can self-start as a wound-rotor induction motor without external secondary resistance. Therefore, discharge resistance is not necessary; the starting equipment is very simple and the rotor structure is robust. It is possible to start with high torque. In this paper, the basic constitution of the proposed motor and the principles of operation are described in detail. The experimental results at starting and pulling into synchronism are shown for confirming the principles of operation and the experimental and numerical results of the starting characteristics. The load ones and the generating ones are shown and then the practical use of the proposed motor is confirmed.     

盘式永磁无刷电动机设计中的一些问题

介绍了盘式永磁无刷电动机的原理和结构，探讨了其设计特点，解决了磁路分析计算和电机主要尺寸确定以及磁极形状选择的问题。     

电动自行车转矩脉动抑制分析与实现

针对电动自行车生产中如何抑制转矩脉动的问题,结合理论分析,提出采用换相电流闭环控制方法。     

隐极无刷双馈电动机的研究

针对无刷双馈电动机的转子磁场转换效率决定了其工作效率的问题,提出了一种隐极无刷双馈电动机隐极转子结构的优化设计方案。对作用较小的隐极转子进行优化设计,即将它们的槽型更改为半开口槽,不断改变它们的长宽比;利用有限元软件ANSYS分析不同长宽比转子结构的隐极无刷双馈电动机,获得其功率绕组励磁与控制绕组励磁分布;利用Matlab软件分解转子磁动势,获得转子磁动势的谐波含量,从而确定最有效谐波含量。实验结果表明,在设定隐极转子的长宽比分别为10、13、15、17、20的情况下,隐极无刷电动机在15倍长宽比转子结构时的能量转换效果最好。     

基于DSP嵌入式技术的无刷直流电动机智能控制系统的研究

本文以TI公司的数字信号处理器TMS320F2812作为核心控制芯片,设计出了一款低成本具有足够功能的无刷直流电动机的调速控制系统实验平台。详细介绍了该控制系统的软硬件结构及控制策略。通过对该控制系统实验结果的分析,表明该系统的动态性能和稳态性能好,抗干扰能力强的特点,且在该实验平台上可进行一些先进控制算法的研究。     

基于Buck电路的BLDCM调速系统设计

为了获得转速平稳、调节快速的无刷直流电机(BLDCM)输出,对BLDCM控制和驱动系统进行了设计。分析了BLDCM的运行原理和转矩波动原因,并采用Buck电路直接驱动解决了转矩波动的问题。针对传统PID调速慢、精度低以及参数调节困难等问题,采用了BP神经网络对PID进行参数调节。在MATLAB/Simulink仿真平台上搭建了系统的各个模块并进行仿真。结果表明,所设计的系统调节速度快,控制过程中超调小,转速平稳,转矩波动减小。     

基于LabVIEW的航空无刷同步电机监控系统设计

针对航空无刷同步电机起动控制过程复杂,需要监测的状态与控制的参数过多,造成调试困难及存在安全隐患的问题,利用LabVIEW开发环境设计了航空无刷同步电机起动运行监控系统。该监控系统基于Modbus通信协议编写,具有很好的通用性。通过在航空无刷同步电机起动控制实验中的应用,验证了该监控系统具有良好的实用性和可扩展性。