番禺30-1砂岩强水驱气藏储层非均质性研究

针对垂向非均质性严重且边底水能量强的番禺30-1气田面临的潜在开发问题，通过岩心分析及测井二次解释，对其夹层特征及储层非均质性等进行了研究，划分出19个流动单元并定量描述了各流动单元的特征参数，建立了该气田的精细地质模型。综合评价表明，新建的地质模型具有较高的精度，为该气藏合理开发提供了坚实的地质基础。     

1/f noise in large-area Hg<Subscript>1−x</Subscript>Cd<Subscript>x</Subscript>Te photodiodes

The 1/f noise in photovoltaic (PV) molecular-beam epitaxy (MBE)-grown Hg_1−xCd_xTe double-layer planar heterostructure (DLPH) large-area detectors is a critical noise component with the potential to limit sensitivity of the cross-track infrared sounder (CrIS) instrument. Therefore, an understanding of the origins and mechanisms of noise currents in these PV detectors is of great importance. Excess low-frequency noise has been measured on a number of 1000-μm-diameter active-area detectors of varying “quality” (i.e., having a wide range of I-V characteristics at 78 K). The 1/f noise was measured as a function of cut-off wavelength under illuminated conditions. For short-wave infrared (SWIR) detectors at 98 K, minimal 1/f noise was measured when the total current was dominated by diffusion with white noise spectral density in the mid-10⁻¹⁵A/Hz^1/2 range. For SWIR detectors dominated by other than diffusion current, the ratio, α, of the noise current in unit bandwidth i_n(f = 1 Hz, V_d = −60 mV, and Δf = 1 Hz) to dark current I_d(V_d = −60 mV) was α_SW-d = i_n/I_d ∼ 1 × 10⁻³. The SWIR detectors measured at 0 mV under illuminated conditions had median α_SW-P = i_n/I_ph ∼ 7 × 10⁻⁶. For mid-wave infrared (MWIR) detectors, α_MW-d = i_n/I_d ∼ 2 × 10⁻⁴, due to tunneling current contributions to the 1/f noise. Measurements on forty-nine 1000-μm-diameter MWIR detectors under illuminated conditions at 98 K and −60 mV bias resulted in α_MW-P = i_n/I_ph = 4.16 ± 1.69 × 10⁻⁶. A significant point to note is that the photo-induced noise spectra are nearly identical at 0 mV and 100 mV reverse bias, with a noise-current-to-photocurrent ratio, α_MW-P, in the mid 10⁻⁶ range. For long-wave infrared (LWIR) detectors measured at 78 K, the ratio, α_LW-d = i_n/I_d ∼ 6 × 10⁻⁶, for the best performers. The majority of the LWIR detectors exhibited α_LW-d on the order of 2 × 10⁻⁵. The photo-induced 1/f noise had α_LW-P = i_n/I_ph ∼ 5 × 10⁻⁶. The value of the noise-current-to-dark-current ratio, α appears to increase with increasing bandgap. It is not clear if this is due to different current mechanisms impacting 1/f noise performance. Measurements on detectors of different bandgaps are needed at temperatures where diffusion current is the dominant current. Excess low-frequency noise measurements made as a function of detector reverse bias indicate 1/f noise may result primarily from the dominant current mechanism at each particular bias. The 1/f noise was not a direct function of the applied bias.     

应用MSP50C30设计电子语音导游机

文章在简要介绍了MSP50C30的结构和特性的基础上，给出了利用MSP50C30设计电子语音导游机的硬件电路和软件编程方法。     

心电图信号的频域分析

提出了一种简便有效的、由心电图（ECG）曲线提取QRS-T复合波的新方法，从而获得P波（当房颤未发生时）或f波（当房颤时）；利用功率谱、自相关、互相关等信号处理技术，对它进行了处理和分析，特别是，比较了未房颤时和发生房颤时的相关信息的显著差别。     

关于从旋涡炉渣回收铜的研究

介绍了用自然澄清法降低、回收旋涡炉渣中的铜的方法。该方法工艺简单。操作方便，不仅降低冶炼成本，同时提高了经济效益。     

Ni-Fe-C对YG30硬质合金与45#钢TIG焊过程中η相形成的影响

采用Ni—Fe—C合金作为填充金属，实现了YG30硬质合金与45^#钢的TIG焊。采用光学显微镜、扫描电镜、电子探针、X射线衍射和显微硬度等方法对焊后试样的焊接接头进行了分析。结果表明：(1)采用Ni—Fe—C合金可以获得YG30硬质合金与45^#钢TIG焊的焊接接头；(2)在Ni—Fe合金的基础上加入适量的C可以抑制YG30／焊缝界面侧大块η相的形成；(3)由于C的扩散而引起的W—Co—C体系的贫碳与YG30／焊缝处高浓度Fe的出现是η相形成的重要原因，YG30／焊缝界面侧形成的η相为M6C型和M12C型复合碳化物。     

Study on Dihydrated Praseodymium Acetylacetonate by Photoacoustic Spectra with Broad Wavelength Range

Photoacousticspectroscopy (PAS)hasbeenusedtonondestructivelyinvestigatealmostallkindsofsam ples,whetherthesampleiscrystalline ,powderorgel .PAspectr oscopyisacalorimetrictechniquewhichmeasurestheenergyabsorbedandsubsequentheatingofthesamplesduetoanonradiativerelaxationpro cess .ThereforePAScanbeusedtostudyopaque ,highlyreflectiveandscatteringsamples ,whicharedif ficulttostudybyconventionalspectroscopytech niques[1] .Withouttheneedofsamplepreparation ,PASavoidstheriskofsamplealteration ,pre…     

A Hermitian Box-scheme for One-dimensional Elliptic Equations – Application to Problems with High Contrasts in the Ellipticity

We introduce a new box-scheme, called ``hermitian box-scheme' on the model of the one-dimensional Poisson problem. The scheme combines features of the box-scheme of Keller, [20], [13], with the hermitian approximation of the gradient on a compact stencil, which is characteristic of compact schemes, [9], [21]. The resulting scheme is proved to be 4th order accurate for the primitive unknown u and its gradient p. The proved convergence rate is 1.5 for (u,p) in the discrete L ² norm. The connection with a non standard mixed finite element method is given. Finally, numerical results are displayed on pertinent 1-D elliptic problems with high contrasts in the ellipticity, showing in practice convergence rates ranging from 1 to 2.5 in the discrete H ¹ norm. This work has been performed with the support of the GDR MOMAS, (ANDRA, CEA, EDF, BRGM and CNRS): Modélisation pour le stockage des déchets radioactifs. The author thanks especially A. Bourgeat for his encouragements and his interest in this work.     

Automated fluorimetry in quality control of pasteurized and ultra-high temperature-treated starch soup

Automated monitoring of the microbiological quality of heat-processed foods by the resazurin reduction test was applied to microtitration plate incubator-fluorimeter technology. The appearance and disappearance of the fluorescing peak of resorufin was monitored on microtitration trays. Pasteurized or ultra-high temperature-treated starch-based soup was used as the model food system. Bacillus subtilis spores (ultra-high temperature treatment) and vegetative cells of Enterococcus faecalis (pasteurization) were inoculated into the soup before the heat treatment at levels which resulted in some survival. The timing of appearance of maximum fluorescence correlated with the number of bacteria in pre-incubated samples. Automated resazurin-reduction fluorimetry was compared with conventional plating, turbidometry and microcolony count by the direct epifluorescent filter technique. The results of the resazurin test correlated well with those of all the other methods tested. Fluorimetry had the advantage that the results could be read within 1–5h and the reproducibility was superior to the other methods.     

新型哈氏合金G—30的耐蚀性能与工业应用

文章叙述了新型镍基耐蚀哈氏合金G-30在不同介质中的耐蚀性能以及工业应用,综合分析了该合金应用的经济性及前景。