Recovery of fluorocarbons in Japan as a measure for abating global warming

The objective of this study is to evaluate the potential for recovering fluorocarbons as measures for the abatement of global warming. In this study, we focused on the three different kinds of fluorocarbons: CFCs, HCFCs and HFCs, and targeted refrigerant use because of the availability of relevant data. We first estimated future fluorocarbon emissions from the targeted appliances; we next compared those emissions in the units of CO₂ equivalent to the level of CO₂ emissions in 1990 from a quantitative point of view. As the result of this study, it was found that fluorocarbon emissions in 1999 and 2010 would be equal to approximately 7 and 3% of the level of CO₂ emissions in 1990 respectively. Moreover, if we implement a 100% recovery rate in every recovery route, we can reduce a large amount of emissions which correspond to approximately 2–5% of the level of CO₂ emissions in 1990, even if we take into account the energy-related CO₂ emissions by the transportation and decomposition of fluorocarbons.     

The greenhouse effect; Impact upon and the role to be played by construction

The authors highlight several possible ways in which the construction industry could lower present emissions of the greenhouse gas, carbon dioxide. It is an excellent discussion document and is recommended reading.     

Granular gases in mechanical engineering: on the origin of heterogeneous ultrasonic shot peening

The behavior of an ultrasonic shot peening process is observed and analyzed by using a model of inelastic hard spheres in a gravitational field that are fluidized by a vibrating bottom wall (sonotrode) in a cylindrical chamber. A marked heterogeneous distribution of impacts appears when the collision between the shot and the side wall becomes inelastic with constant dissipation. This effect is one order of magnitude larger than the simple heterogeneity arising from boundary collision on the cylinder. Variable restitution coefficients bring the simulation closer to the general observation and allow the investigation of peening regimes with changing shot density. We compute within this model other physical quantities (impact velocities, impact angle, temperature and density profile) that are influenced by the number N of spheres.     

Predictive modeling of mercury speciation in combustion flue gases using GMDH-based abductive networks

Modeling mercury speciation is an important requirement for estimating harmful emissions from coal-fired power plants and developing strategies to reduce them. First-principle models based on chemical, kinetic, and thermodynamic aspects exist, but these are complex and difficult to develop. The use of modern data-based machine learning techniques has been recently introduced, including neural networks. Here we propose an alternative approach using abductive networks based on the group method of data handling (GMDH) algorithm, with the advantages of simplified and more automated model synthesis, automatic selection of significant inputs, and more transparent input–output model relationships. Models were developed for predicting three types of mercury speciation (elemental, oxidized, and particulate) using a small dataset containing six inputs parameters on the composition of the coal used and boiler operating conditions. Prediction performance compares favourably with neural network models developed using the same dataset, with correlation coefficients as high as 0.97 for training data. Network committees (ensembles) are proposed as a means of improving prediction accuracy, and suggestions are made for future work to further improve performance.     

可燃气体检测报警系统的分析和检修

分析可燃气体检测报警系统的组成和检修方法，并列举了根据故障现象进行分析和检修的实例。     

Layout Optimization for Greenhouse WSN Based on Path Loss Analysis

When wireless sensor networks (WSN) are deployed in the vegetable greenhouse with dynamic connectivity and interference environment, it is necessary to increase the node transmit power to ensure the communication quality, which leads to serious network interference. To offset the negative impact, the transmit power of other nodes must also be increased. The result is that the network becomes worse and worse, and node energy is wasted a lot. Taking into account the irregular connection range in the cucumber greenhouse WSN, we measured the transmission characteristics of wireless signals under the 2.4 Ghz operating frequency. For improving network layout in the greenhouse, a semi-empirical prediction model of signal loss is then studied based on the measured data. Compared with other models, the average relative error of this semi-empirical signal loss model is only 2.3%. Finally, by combining the improved network topology algorithm and tabu search, this paper studies a greenhouse WSN layout that can reduce path loss, save energy, and ensure communication quality. Given the limitation of node-degree constraint in traditional network layout algorithms, the improved algorithm applies the forwarding constraint to balance network energy consumption and constructs asymmetric network communication links. Experimental results show that this research can realize the energy consumption optimization of WSN layout in the greenhouse.     

A farm level approach to define successful mitigation strategies for GHG emissions from ruminant livestock systems

Ruminant livestock systems are a significant source of greenhouse gases (GHGs). Thus far, mitigation options for GHG emissions mainly focused on a single gas, and are treated as isolated activities. The present paper proposes a framework for a farm level approach for the full accounting of GHG emissions. The methodology accounts for the relevant direct and indirect emissions of methane, nitrous oxide and carbon dioxide, including carbon sequestration. Furthermore, the potential trade-off with ammonia volatilisation and nitrate leaching are taken into account. A ruminant livestock farm is represented with a conceptual model consisting of five pools: animal, manure, soil, crop and feed. The carbon and nitrogen inputs, throughputs and outputs are described, and the direct emissions are related to the carbon and nitrogen flows. The indirect emissions included in the methodology are mainly carbon dioxide emissions from energy use and nitrous oxide emissions related to imported resources and nitrogen losses. The whole farm approach is illustrated with a case of two dairy farms with contrasting livestock density and grassland management. It is shown that the inclusion of carbon sequestration and all indirect emissions have a major impact on the GHG budget of the farm. For one farm, the effect of four mitigation options on the GHG emissions was quantified. It was concluded that a whole farm approach of full accounting contributes to a better insight in the interactions between the carbon and nitrogen flows and the resulting emissions, within and outside the farm boundaries. Consequently, the methodology can be used to develop efficient and effective mitigation strategies.     

酸性气流脱除物STW-3#对NR硫化性能影响的研究

酸性气流脱除物是净化天然气、合成气、煤气时脱除的物质，STW-3#是由该物质制成的样品之一。就STW-3#对NR硫化性能的影响进行了研究。结果表明，STW-3#对NR有较好的硫化促进特性和一定的软化增塑作用；其用量3.0份以下时，硫化特性较差，3．0份以上时硫化特性较好，但超过4．0份时有粘辊和喷霜现象。它与促进剂M并用时，硫化特性与促进剂D相似。     

基于中红外QCL的痕量CO气体传感器

为了减少CO爆炸给国民经济造成的巨大损伤,提出了一种能够快速地监测环境空气中痕量CO的气体传感器。由于CO分子基频吸收谱带的吸收线强要比泛频带和组合频带的吸收线强高出2～3个数量级,选择激射中心波长为4.65μm中红外量子级联激光器（QCL）作为光源,同时再配合长光程Herriott气室提高了CO体积分数检测下限。同时,该传感器采用单光源双探测器差分光学结构,消除了电调制光源所带来的不稳定性。实验表明：该传感器CO体积分数检测下限为2×10-6,并且操作人员可以通过替换在不同波长下运行的中红外QCL来测量其它气体。     

Effect of Water Vapor on the Release of Fission Gases from Uranium Oxycarbide in High-Temperature, Gas-Cooled Reactor Coated Fuel Particles

The hydrolysis of uranium oxycarbide (UCO) was studied by injecting water vapor into a fuel element containing a known number of high-temperature, gas-cooled reactor (HTGR) coated particles with exposed fuel kernels. The experiments were conducted in the High Flux Isotope Reactor (HFIR) at temperatures between 700° and 1000°C, a system pressure of 200 kPa, and partial pressures of water vapor between 21 and 199 Pa. The general sequential response of the exposed fuel kernels to water vapor addition consisted of (1) a rapid release of stored fission gas with a concomitant increase in the steady-state release and (2) a period of constant steady-state release. Upon cessation of the addition of water vapor, a decline in the release to prehydrolysis values generally occurred. The release of stored fission gas was dependent on the square of the partial pressure of water vapor. The ratio of the constant steady-state release to the prehydrolysis value was independent of the partial pressure of water vapor. The time constant for the decline in the release was the same in all of the hydrolysis tests.