流变仪在覆铜板工序中的应用

本文简要叙述利用流变仪对覆铜箔层压板生产工序中的胶液和半固化片参数进行控制,从而更好地保证胶液和 半固化片性状的一致性,以有利于控制板材流胶和品质。     

用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量

本文主要简述与运用AIR-C2H2原子吸收光谱法进行镉镍电池正极浸渍液中钴含量的测定，介绍了钴最佳测定条件及呈良好线性范围的浓度。同时对样品消化处理条件，在测定中样品的干扰因素进行了综合考虑，该方法具有很好的灵敏度，很好的重复性，干扰小，同时具有方法步骤简单，操作容易掌握等特点，对样品钴含量的测定，其相对标准偏差均小于1.0%（n=6），标准加入回收率均在97.0%～102.0%(n=5）范围内，结果表明，运用AIR-C2H2原子吸收光谱法测定镉镍电池正极浸渍液中钴含量的分析，达到了实验室分析质量控制的要求，完全适用于镉镍电池正极浸渍液中钴含量的控制分析和样品系统分析。     

Influence of Shaping Condition on Etherification Performance of Hβ Zeolite

Etherification reaction of FCC light gasoline over Hβ zeolite was investigated to decrease the light olefins in motor gasoline while enhancing octane. Etherification activity of several molecular sieve catalysts for FCC light gasoline was studied in a fixed-bed reactor. The influence of pore-enlarging agent (PEG) with different molecular weight, binder (γ-Al₂O₃), and peptizing agent (HNO₃) in the shaping process on etherification activity of Hβ zeolite was studied. The impregnating ways of precursor of oxides and the order of extruding and impregnating were also investigated. The results show that the activity of extruded Hβ zeolite before impregnating precursor of oxides is higher than the reverse order. The best shaping condition obtained was PEG-4000 10%, γ-Al₂O₃ 20%, and HNO₃ 10%. At the optimal reaction condition, the conversion of tert-olefins reached the peak. 62.93%, the yield of TAME, is also high and the technology can be applied to industry as well.     

罩面金属氟碳涂料的配方设计及应用

介绍了氟碳金属涂料和氟碳罩面清漆的参考配方、生产工艺,探讨了罩面金属氟碳涂料配方的设计及喷涂效果,表明金属氟碳漆罩清漆效果良。     

热塑性复合材料用混纤预浸料特征

本文对热塑性复合材料用预浸料的结构及其在复合材料成型加工中的浸渍性能进行分析.     

Varnish layer hardness of oriental beech (fagus orientalist L.) wood as affected by impregnation and bleaching

The impacts of impregnation and bleaching on the varnish layer hardness of Oriental beech (Fagus orientalist L.) wood were investigated. A number of bleaching combinations {[NaOH−H₂O₂], [NaOH−Ca(OH)₂−H₂O₂], [NaOH−MgSO₄−H₂O₂] [NaHSO₃−H₂C₂O₄], [NaSiO₃−H₂O₂], [KMnO₄+NaHSO₃+H₂O₃]} were applied at 18% concentration for bleaching to both impregnated and unimpregnated specimens of Oriental beech wood. Subsequently, water-based (WB) varnish was coated over the samples and the varnish layer hardness values were determined in accordance with ASTM D 4366-95. All of the chemicals used for bleaching reduced the surface hardness. However, after varnish coating, the hardness of most samples was similar to that of the varnish-coated natural (control) samples.     

水性聚氨酯木器漆中消泡剂的选用

水性聚氨酯木器漆极易产生气泡,影响其装饰性。通过系列试验,筛选出适宜的消泡剂,并确定其最佳用量。     

废聚酯饮料瓶裂解制备聚酯清漆

叙述了以废聚酯饮料瓶为原料,经过醇解、酯化以及缩聚等工艺过程,制成透明聚酯清漆。该法为废饮料瓶回收利用开辟了可行之路,也为聚酯清漆找到了廉价的原材料。     

高性价比顺丁烯二酸醇酸树脂的研制及其应用

以顺丁烯二酸酐、豆油酸、松香和季戊四醇合成醇酸树脂,再与颜填料配制成质量好、价格较低的醇酸树脂漆。介绍了树脂原材料的选择,基本配比和技术指标,生产工艺及应用实例,讨论了影响其性能指标的主要因素。     

不饱和树脂绝缘阻燃漆的合成与性能研究

通过在环氧树脂中引入双键合成不饱和环氧树脂,加入稀释剂苯乙烯制备无溶剂型绝缘漆,通过电阻率和介电损耗对其绝缘性能进行表征.研究不同阻燃剂对绝缘漆体系的阻燃性能、电性能和力学性能的影响.通过DSC研究绝缘漆体系的固化工艺条件.实验结果表明,绝缘漆体系中当三聚氰胺磷酸盐（MP）质量分数为30%时,体系的阻燃性能达到UL0-94 V-0级,绝缘阻燃漆的电阻为7.8×10^13Ω,电阻率为4.36×10^15Ω.·cm,介电损耗为0.014 5,此时拉伸强度为3.34MPa,冲击强度为0.71 kJ/m^2.