Fast convergent study on potential－harmonic method of directly solving Schrodinger equation in few－body systems

Ｆａｓｔｃｏｎｖｅｒｇｅｎｔｓｔｕｄｙｏｎｐｏｔｅｎｔｉａｌ－ｈａｒｍｏｎｉｃｍｅｔｈｏｄｏｆｄｉｒｅｃｔｌｙｓｏｌｖｉｎｇＳｃｈｒｏｄｉｎｇｅｒｅｑｕａｔｉｏｎｉｎｆｅｗ－ｂｏｄｙｓｙｓｔｅｍｓＷａｎｇＹｉ－Ｘｕａｎ（王沂轩）ａｎｄＤｅｎｓＣｏｎｇ...     

正交曲线坐标下三维代数应力通量模型

针对弯曲及不规则明渠的水动力及物质输运特性，本文建立了曲线坐标系下的三维代数应力通量数学模型，对平面上弯曲及不规则复杂边界情形，采用Poisson方程进行正交曲线坐标变换，各向异性的湍流代数应力通量模型被引用于本文的模拟计算中，以体现复杂边界条件引起的水动力及物质输运特性的变化。通过180度强弯曲明渠水槽及贵溪电厂不规则边界河段物理模型试验两个实例计算表明，实测值与计算吻合良好，效果令人满意。     

Time-Space Label Switching Protocol (TSL-SP)—A New Paradigm of Network Resource Assignment

In this paper we propose a new protocol called time-space label switching protocol (TSL-SP) in optical burst switching (OBS), and define the terms time-space label (TSL) and time-space routing (TSR). An important concept of response time is introduced in the time label mechanism. The TSL-SP is a new technology that can quickly and efficiently forward data with a label on the optical networks. A two-dimension label switched path (TD-LSP) can be set up, that is maintained and deleted by the TSL-SP. For clearly illuminating the operation principles of the TSL-SP, we propose a new approach of orthogonal time-space coordinates in which the vertical coordinate is the space label and the horizontal coordinate is the time label. The proposed TD-LSP can dramatically reduce the routing failure probability and greatly improve the link network efficiency compared with other signaling protocols. Moreover, we define the time-space label control plane that can achieve the higher efficiency. When the TSL-SP is applied to networks, switching performance can be improved by two orders compared to the switching performance with the conventional OBS signaling protocols. The fundamental goal of TSL-SP is to band the signaling and routing functions together closely. Also, the TSL-SP can reduce the complexity of the network, support automatic service offering, and provide traffic engineering.     

A mathematical model for wet-chemical diffusion-controlled mask etching through a circular hole

Asymptotic solutions are presented for diffusion-controlled wet-chemical etching through a round hole in a mask. The three-dimensional diffusion field is assumed to be axisymmetric and fully developed. Two time regimes are considered. The first applies when the etched depth is small in comparison with the width of the mask opening. In the second, the depth of etching is much greater than the width of the mask opening. Explicit solutions are found for the shape of the etched surface as a function of the physical parameters. Among other things it is found that, as long as the etched pits are shallow, etching through small apertures is faster than through larger ones. The opposite is true for deep pits.     

Curvilinear grids for WENO methods in astrophysical simulations

We investigate the applicability of curvilinear grids in the context of astrophysical simulations and WENO schemes. With the non-smooth mapping functions from Calhoun et al. (2008), we can tackle many astrophysical problems which were out of scope with the standard grids in numerical astrophysics. We describe the difficulties occurring when implementing curvilinear coordinates into our WENO code, and how we overcome them. We illustrate the theoretical results with numerical data. The WENO finite difference scheme works only for high Mach number flows and smooth mapping functions, whereas the finite volume scheme gives accurate results even for low Mach number flows and on non-smooth grids.     

An efficient method for a numerical description of virgin olive oil color with only two absorbance measurements

Four polynomial expressions are obtained that provide a good approximation and an easy, rapid calculation of the chromatic coordinates and the chroma—L ^*, a ^*, b ^*, and C—for the illuminant C and the standard observer, for a virgin or extra virgin olive oil; absorbance is measured at only 480 and 670 nm. These are as follows: L ^*=0.556458(A₄₈₀)²−2.51145A₄₈₀+0.55504(A₆₇₀)²−8.53016A₆₇₀+98.4089; a ^*=0.177372(A₄₈₀)²+2.1363A₄₈₀+1.43254(A₆₇₀)²−0.789231A₆₇₀−13.9246; b ^*=−16.0277(A₄₈₀)²+79.8932A₄₈₀−5.06558(A₆₇₀)²+3.36169A₆₇₀+31.9405; C=−15.8439(A₄₈₀)²+78.9312A₄₈₀−5.26784(A₆₇₀)²+3.56917A₆₇₀+33.3927. These give acceptable results, making the method a practical alternative to the extremely laborious Commission Internationale d’Eclairage (CIE) L ^* a ^* b ^* system, by which 391 absorbance values must be measured individually, nanometer by nanometer, before applying more complex equations. The validity of the proposed method has been confirmed by comparison, using a set of 20 sample oils different from the set of 25 oils used to generate the order of the equations. The variations between the values provided by the proposed and standard methods, respectively, had a mean of 0.00 for each of the chromatic variables—L ^* , a ^* , b ^* , and C; SD were moderate (0.71, 0.52, 1.22, and 1.22, respectively); the root mean square and the R ²-terms also confirmed the validity of the method.     

电路板雕刻机的运动控制系统设计

介绍了电路板雕刻机的运动控制系统的特点和规律,系统以3关节直角坐标型机器人为外部结构,基于Visval C＋＋的操做环境,控制核心采用DSP,同时与上位PC机通讯进行控制．对电路板雕刻机中的步进电机实现电气控制,以完成电路板的雕刻过程．     

椭圆曲线密码中抗功耗分析攻击的标量乘改进方案

椭圆曲线标量乘法运算是椭圆曲线密码(ECC)体制中最主要的计算过程,标量乘法的效率和安全性一直是研究的热点。针对椭圆曲线标量乘运算计算量大且易受功耗分析攻击的问题,提出了一种抗功耗分析攻击的快速滑动窗口算法,在雅可比和仿射混合坐标系下采用有符号滑动窗口算法实现椭圆曲线标量乘计算,并采用随机化密钥方法抵抗功耗分析攻击。与二进制展开法、密钥分解法相比的结果表明,新设计的有符号滑动窗口标量乘算法计算效率、抗攻击性能有明显提高。     

特征线坐标系下柱对称超音速流膨胀波计算方法研究

在静压圆盘止推气体轴承柱对称超音速流膨胀波系的计算中,借鉴Liepmann的特征线坐标系与自然坐标系变换理论和Liepmann引入两个黎曼不变量的方法,使得边界条件的处理更为直观和简便。采用特征线坐标系下的特征线法,推导计算该膨胀波系所用到的基本计算公式,将其应用于 P-M 流动并与 P-M 流动理论解进行比较。结果表明,数值计算结果与P-M流动理论解吻合,该计算方法可行。     

一种圆柱坐标测量仪控制系统的设计与实现

圆柱坐标测量仪具有结构简单、测量范围大、适合于测量圆弧类零件的特点,本文针对航空型材弯曲类钣金零件成形精度测量,设计开发了一种圆柱坐标测量仪,对其控制系统软硬件的体系结构和功能进行了研究.采用计算机扩展卡的方式开发了其控制系统硬件,采用多线程技术,利用VC开发了控制系统软件,并利用Matlab和VC混合编程技术开发了曲面重构模块.实验表明,其控制精度达到0.3mm,满足了钣金类零件测量的需求.