A novel fast distance relay for series compensated transmission lines

This paper presents a fast distance relay for series compensated transmission lines based on the R–L differential-equation algorithm using the theory of equal transfer process of transmission lines. The measuring distances based on the proposed algorithm can fast approach the actual value of fault distance when a fault occurs in front of the series capacitor. When a fault occurs behind of the series capacitor, the fault loop, including the series capacitor, does not match the R–L transmission line model, so the measuring distances fluctuate severely. Based on this, the relative position of the fault with respect to the series capacitor can be judged effectively according to the fluctuation range of the measuring distances, and the accurate fault location can be obtained fast. A variety of PSCAD/EMTDC simulation tests show that the new relay has fast operating speed and high accuracy when applied to the long series compensated transmission lines.     

Protection of power transformer using multi criteria decision-making

Power transformers are protected by different relays that operate independently. Malfunction of each relay has a major role in reducing the reliability of the protection system. In order to mitigate the main drawbacks of the power transformer relays, an overall protection scheme is presented in this paper. This scheme proposes a novel multi criterion algorithm using decision-making based on fuzzy logic. In this paper the outputs of restricted earth fault relay and a directional check unit, are combined with the output of the differential protection relay. Therefore, problems that are pertaining to independent operation of each relay have been mitigated and the relays cover protection blind spots of each other. The improved power transformer protection (IPTP) scheme enhances the sensitivity and reliability of the power transformer protection. Extensive simulations are used to measure the effectiveness and merit of the proposed IPTP relay. The above efforts result in a multi criteria approach for protection of power transformers.     

区域分割法辅助计算复杂图像面积

介绍计算具有复杂边缘轮廓的图像面积的区域分割法。采用鼠标多边形作图法近似圈定待处理的图像区域。本文由格林定理出发得到有限连续边界与其包围区域面积之间的函数关系,并且应用这一函数关系得出多边形与其包围区域面积的数学关系,近似得到图像区域面积。文中以烟幕图像为例对上述结论进行了验证。文章最后给出了在VC++环境下实现多边形分割的部分源代码。     

烧结成品运输自动控制系统的改进

对烧结成品运输自控系统不稳定性因素进行了分析，提出了采取优化硬件外围工作环境，完善软件保护程序等改进措施。改进后的自控系统稳定性明显提高。     

帧中继交换技术

本文论述了帧中继交换的概念、标准，结构、特点网络式样及在互连网中的应用。     

Effect of reliability of grounding of the shaft of a turboset on the operation of devices for control and protection of exciting circuits

Disturbance of the grounding of the shaft of a turboset or its absence for technical reasons can result in failure, misoperation, limitation of the operating zone, errors or limitation of the sensitivity of devices for control and protection of exciting circuits from single-point leakage, and electroerosion of elements of the turboset structure. Measures for increasing the reliability of the grounding of the shaft are discussed. __________ Translated from élektricheskie Stantsii, No. 3, March 2006, pp. 61–66.     

隔河岩水电厂220 kV线路保护配置及运行分析

介绍了隔河岩电厂220kV线路保护的原理设计及运行情况，以及采用了双重微机化继电保护装置后带来的优越性，简要描述了CSL-101A高频保护和RCS-931A光纤保护的应用特点。     

基于集群计算机的保护定值在线校核

采用分布式计算技术，研究并实现了基于集群计算机的保护定值在线校核并行计算方法。首先分析了保护定值校核计算的计算量和计算特点，接着对可能采用的并行计算方法进行比较，最后选择了基于电网分块的并行计算方法。采用协调机加计算子机的计算模式，在协调机上执行分块算法，通过基于主导节点的图划分方法把电网分成几块，每台计算子机只校核1块电网内的保护定值，最后由协调机收集汇总计算结果。现场应用证明，该并行计算方法正确、有效。     

带有给定切线多边形的保形有理三次B样条曲线

本文给出了带有给定切线多边形的保形有理三次Ｂ样条曲线，其部分权因子可通过选取切点的位置来确定，由此方法还导出了保形有理三次Ｂ样条插值曲线，最后，给出了两个例子。     

A new voltage control equipment using fuzzy inference

Power system control equipment needs higher sensitivity and operational reliability. Advanced voltage control equipment is needed for reducing the frequency of tap changes and improving the characteristics (the relationship between the actual voltage and reference voltage) of the voltage to meet today's power system requirements. However, these objectives are in a trade-off relationship. Studies of voltage control derived from a knowledge base suitable for electric power systems can satisfy these objectives using fuzzy inference. Compared with corresponding conventional equipment, the new equipment improved the deviation of 30 min average voltage of 30 percent. This paper describes the design concept of new voltage control equipment using fuzzy inference. In addition, field test results are described along with rules of fuzzy inference, membership functions, and the deviation of 30 min average voltage through detailed simulation.