Remarkably enhanced energy storage properties of lead-free Ba0.53Sr0.47TiO3 thin films capacitors by optimizing bottom electrode thickness

The lead-free Ba_0.53Sr_0.47TiO₃ (BST) thin films buffered with La_0.67Sr_0.33MnO₃ (LSMO) bottom electrode of different thicknesses were fabricated by pulsed laser deposition method on a (001) SrTiO₃ substrate. It was found that the roughness of electrode decreases and substrate stress relaxes gradually with the increase of LSMO thickness, which is beneficial for weakening local high electric field and achieving higher E_b. Therefore, the recoverable energy density (W_rec) of BST films can be greatly improved up to 67.3 %, that is, from 30.6 J/cm³ for the LSMO thickness of 30 nm up to 51.2 J/cm³ for the LSMO thickness of 140 nm after optimizing the LSMO thickness. Furthermore, the thin film capacitor with a 140 nm LSMO bottom electrode shows an outstanding thermal stability from 20 °C to 160 °C and superior fatigue resistance after 10⁸ electrical cycles with only a slightly decrease of W_rec below 1.6 % and 3.7 %, respectively. Our work demonstrates that optimizing bottom electrodes thickness is a promising way for enhancing energy storage properties of thin-film capacitors.     

固体铝电解电容器用导电高分子制备工艺进展

依据近年的相关专利,综述了用于固体铝电解电容器的导电高分子的最新制备工艺,介绍了导电高分子固体铝电解电容器的结构,详细描述了制备导电高分子的两种主要方法——化学聚合和电化学聚合——及其进展历程。介绍了新颖掺杂剂的发现与使用,对各种工艺的特点进行了评述。     

超高压大容量铝电解电容器的研制

分析了大功率设备用超高压大容量铝电解电容器的特点,通过研制工作电解液、制订制作工艺及零部件设计方案,研制出的超高压大容量铝电解电容器具有损耗角正切小(tgδ为0.25)、承受纹波电流能力强(100 Hz,2.12～27.8 A)及寿命长的特点,耐久性达到85℃,5 000 h。     

5Gb/s 0.25μm CMOS限幅放大器

采用TSMC 0.25μm CMOS技术设计实现了高速低功耗光纤通信用限幅放大器.该放大器采用有源电感负载技术和放大器直接耦合技术以提高增益,拓展带宽,降低功耗并保持了良好的噪声性能.电路采用3.3V单电源供电,电路增益可达50dB,输入动态范围小于5mVpp,最高工作速率可达7Gb/s,均方根抖动小于0.03UI.此外核心电路功耗小于40mW,芯片面积仅为0.70mm×0.70mm.可满足2.5,3.125和5Gb/s三个速率级的光纤通信系统的要求.     

充气集合式高电压并联电容器的几点改进

BAMHL1 1 /3- 72 0 0 - 1× 3W是在总结以往充气集合式高电压并联电容器产品优点的基础上 ,为优化大容量产品结构 ,提高绝缘可靠性和设备技术经济性能而开发的项目。本文着重介绍该产品的内部结构、外壳筋板结构和混合气体绝缘等几点改进。     

提高超小型铝电解电容器生产一次合格率

恰当选择原材料、确保铆接工序质量、重视工作电解液的配比、严控各工序成品率是提高超小型铝电解电容器投入产出一次合格率的关键。以１０Ｖ－４７μＦ（４ｍｍ×７ｍｍ）产品为例，投入产出一次合格率达９４％以上。     

参数设计法在铝电解电容器设计中的应用探讨

论述了参数设计法在铝电解电容器设计开发阶段的应用。文中阐明了铝电解电容器的主要质量特性(损耗因子、电容量)及芯包外径的参数设计原理,并建立了归一化函数作为优选设计方案的判据。实例证明在铝电解电容器的设计过程中应用参数设计法以减小产品质量特性变异是有效的。     

硫酸/盐酸比例和Al~(3+)含量对铝箔隧道孔生长的影响

研究了硫酸/盐酸比例、温度和Al3+含量对高纯铝箔隧道孔生长的影响,发现随着硫酸浓度增加,温度对隧道孔极限长度和孔径的影响减小,在本文条件下隧道孔生长的临界温度最低可降低到35℃。在电解液中一定含量的Al3+可以避免铝箔表面形成大孔,从而改善隧道孔分布均匀性。     

雷电冲击电流测试系统研究

目的 研究雷电冲击电流测试系统，方法 用无感电阻网络分流器测量雷电冲击电流，并进测量重复性、线性度试验和阶跃波响应试验。结果与结论 所研制的无感电阻网络分流器符合国家标准GB/T7626.5-1999和国际电工委员会标准IEC61000-4-5的要求，且可用于KV级脉冲大电流的测量和雷电浪涌（冲击）模拟器短路电流的波形校准。     

Effect of the polymer matrices on the dielectric behavior of a percolative high-k polymer composite for embedded capacitor applications

High dielectric constant (high-k) polymer composites are of great interest for embedded capacitor applications. Previously, we demonstrated that epoxy—aluminum composites are promising for embedded capacitor applications, because they have a high dielectric constant and a low dielectric loss due to the core—shell structure of the self-passivated aluminum particles. In this work, to further understand the dielectric behavior of aluminum composites, lower-loss polymers such as silicone, polyimide, polynorbornene, and benzocyclobutene were explored as matrices for the aluminum composites. It is found that the polymer matrices can significantly change the dielectric properties of the aluminum composites. A polymer matrix with a lower dielectric constant generally results in a lower dielectric constant of its aluminum composites. In this regard, polymer—aluminum composites have a similar dielectric characteristic as polymer—ceramic composites. Thermomechanical properties of aluminum composites were characterized by a thermomechanical analyzer.