Design of delayed reconfigurable manufacturing system based on part family grouping and machine selection

To improve the convertibility of reconfigurable manufacturing system (RMS), the concept of delayed reconfigurable manufacturing system (D-RMS) was proposed. RMS and D-RMS are both constructed around part family. However, D-RMS may suffer from ultra-long system problem with unacceptable idle machines using generic RMS part families. Besides, considering the complex basic system structure of D-RMS, machine selection of D-RMS should be addressed, including dedicated machine, flexible machine, and reconfigurable machine. Therefore, a system design method for D-RMS based on part family grouping and machine selection is proposed. Firstly, a part family grouping method is proposed for D-RMS that groups the parts with more former common operations into the same part family. The concept of longest relative position common operation subsequence (LPCS) is proposed. The similarity coefficient among the parts is calculated based on LPCS. The reciprocal value of the operation position of LPCS is adopted as the characteristic value. The average linkage clustering (ALC) algorithm is used to cluster the parts. Secondly, a machine selection method is proposed to complete the system design of D-RMS, including machine selection rules and the dividing point decision model. Finally, a case study is given to implement and verify the proposed system design method for D-RMS. The results show that the proposed system design method is effective, which can group parts with more former common operations into the same part family and select appropriate machine types.     

Interfacial failure analysis of functionally graded adhesively bonded double supported tee joint of laminated FRP composite plates

This paper deals with three-dimensional non-linear finite element analyses to assess the structural behavior of adhesively-bonded double supported tee joint of laminated FRP composites having embedded interfacial failures. The onset of interfacial failures is predicted by using Tsai–Wu coupled stress failure criterion with pre-determined stress values. The concept of fracture mechanics principle is utilized to study the sustainability of the tee joint having interfacial failures pre-existed at the critical locations. Individual modes of the strain energy release rates (SERR) G_I, G_II and G_III, are considered as the damage growth parameters and, are evaluated using the Modified crack closure integral (MCCI) technique based on the concept of linear elastic fracture mechanics (LEFM). Based on the stress analyses, it has been observed that the interfacial failures in tee joint structure trigger at the interface of base plate and adhesive layer from both ends of base plate. Depending on the SERR magnitudes, it has been noticed that the interfacial failure propagates under mixed mode condition. Therefore total SERR (G_T) is considered as the governing parameter for damage propagation. Furthermore, efforts have been made to retard damage propagation rate by employing functionally graded adhesive (FGA) instead of monolithic adhesive material. Series of numerical simulations have been performed for varied interfacial failure length in functionally graded adhesively bonded double supported tee joint structure in order to achieve the significant effect of FGA with various modulus ratios on SERR. Material gradation of adhesive indicates significant SERR reduction at the incipient stage of failure which necessitates the use of functionally graded adhesive for the tee joint and prolong the service life of the structure.     

Color Grouping in Space and Time: Evidence From Negative Color-Based Carryover Effects in Preview Search.

Five experiments addressed the role of color grouping in preview search (D. G. Watson & G. W. Humphreys, 1997). Experiment 1 used opposite color ratios of distractors in preview and second search displays, creating equal numbers of distractors in each color group in the final display. There was selective slowing for new targets carrying the majority color of the old items. This effect held when there was no bias in the preview and only the second search set had an uneven color ratio (Experiment 2). In Experiment 3, participants had foreknowledge of the target color, and effects were shown over and above those due to color biases. Experiment 4 demonstrated negative color carryover even when previews changed color. Experiment 5 showed reduced color carryover effects when previews were presented more briefly. Collectively, the results provide evidence for inhibitory carryover effects in preview search based on feature grouping. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Perceptual primitives from an extended 4D Hough transform

Directional features extracted from Gabor wavelets responses were used to train a structure of self-organising maps, thus classifying each pixel in the image within a neuron-map. Resulting directional primitives were grouped into perceptual primitives introducing an extended 4D Hough transform to group pixels with similar directional features. These can then be used as perceptual primitives to detect salient structures. The proposed method has independently fixed parameters that do not need to be tuned for different kind or quality of images. We present results in application to noisy FLIR images and show that line primitives for complex structures, such as bridges, or simple structures, such as runways, can be found by this approach. We compare and demonstrate the quality of our results with those obtained through a parameter-dependent traditional Canny edge detector and Hough line finding process.     

聚酯装置熔体过滤器的国产化改造

熔体过滤器为聚酯装置关键设备,其国产化问题一直未能解决。该文通过对天津分公司200kt/a聚酯装置熔体过滤器改造方案的介绍,探讨了其国产化条件,分析了国产熔体过滤器的结构特点,并与进口过滤器进行了对比,提出了一些看法。     

一种新的知觉分割模型*

根据知觉的最新理论研究和实验结果,提出一种新的知觉模型,并用于考查计算机视觉中的分割问题.分割问题实质上是知觉表达问题,现在分割的困难性可能是知觉上局部到整体的还原论假设造成的;分割可能不是一次完成的,而是经过整体到局部的过程才最终完成.新的知觉模型将对建立更好的分割模型提供理论基础.     

红细胞瞬间磁化试剂的制备与应用

目的研制用于ABO、RHD血型检测试剂的红细胞瞬间磁化试剂。方法采用共沉淀法制备磁性粒子,并检测其主要成分及粒径大小,用此磁性粒子制备红细胞瞬间磁化试剂,并分别进行各项检测。结果磁性粒子的主要成分为四氧化三铁,粒径100nm左右。该试剂的外观及特异性均合格,磁响应时间不超过30s,重复性较好,敏感性为98.20%,与试管法检测结果比较,差异无显著意义。结论红细胞瞬间磁化试剂可用于红细胞系统的血型检测。     

纤维缠绕三通管机械的发展

本文对纤维缠绕三通管机械的发展和研究进行了综合分析，给出了一些典型的制造方法及设备。     

基于WIFI+GPRS的无线传感器网络监控系统

传感器网络是一个将传感器技术、嵌入式系统、通信网络技术相结合的网络,实现数据采集、无线定位、远程监控、设备管理等功能,结合ZigBee、WIFI、GPRS等无线网络的优点,构建一个异构无线传感器网络,实现无线网络和移动通讯刚络的远程数据采集、定位与控制、异常事件报警,系统通过无线传感器终端节点进行数据采集,利用具有接收、转发数据助能的无线网络接收,实现异构网络终端设备间的数据交互与共享,达到无线定位,短信报警、上位机软件监控的目的．     

融合多种策略的改进粒子群算法

为有效解决粒子群优化算法(Particle Swarm Optimization, PSO)容易陷入局部极值及进化后期收敛速度慢、精度低等缺点, 提出了一种融合多种策略的改进粒子群算法(Improved Particle Swarm Optimization, IPSO). 该算法包括以下4点改进:(1)采取分组控制策略, 按适应度值将种群分为优解组和劣解组, 优解组进行遗传交叉操作, 劣解组进行变异操作; (2)精英策略用来更新种群, 根据适应度值从经过交叉和变异操作后的种群及初始种群中选出前一半粒子作为新种群; (3)改进粒子学习模式, 充分利用种群信息, 以优良种群的均值代替个体最优位置;(4)引入概率控制来控制算法进入交叉和变异操作的概率. 测试函数的仿真结果表明, 与标准PSO及其改进算法相比, IPSO算法能有效兼顾全局探索和局部挖掘能力, 具有收敛速度快、求解精度高、避开局部最优解的优点.