An Experimental Investigation into the Feed Rate Capacity of Rotary Valve and Blow Tank Feeders

Industry widely uses rotary valves and blow tanks for the pneumatic conveying of products, each having their pros and cons depending on the specific application. This article shows the differing results obtained when low-velocity conveying a product through a common pipeline using both a drop-through rotary valve and a bottom-discharge blow tank feeder. A number of issues arise in the rotary valve system, the main one being rotary valve air leakage. A blow tank system, on the other hand, does not leak, as it is an enclosed system. The experimental results show dramatic differences in product throughput. Further exploration leads to a novel modification being made to the rotary valve system in an attempt to increase its capacity. The result of this modification shows a slight increase in output tonnage, but still significantly less than that obtained from the blow tank.     

New rotary valves for pulse-tube refrigerators

In most used rotary valves in GM-type pulse-tube refrigerators the rotor makes heavy mechanical contact with the stator, so the valve is liable to wear, and large torques are needed. In this paper we will describe two types of valves, which have balanced forces on the rotor. In the first valve the rotor and the stator make no mechanical contact. The second type is a contact valve, like the classical valves, but the forces on the rotor are balanced in a different way. Therefore, these valves are less liable to wear, and the torques needed to rotate the valves are small.     

MOS控制晶闸管的三重扩散工艺研究

本文对ＭＣＴ的核心工艺－三重扩散工艺进行了详细研究。通过ＳＵＰＲＥＭ－Ⅲ计算机工艺仿真，获得了三重扩散的工艺条件。     

A unified proposal for characteristic testing methods and figure of merit of 8‐kV/3.5‐kVA class light‐triggered thyristors

Power devices with high capability have been developed. 8‐kV/3.5‐kA‐class light‐triggered thyristors have the highest capability among power devices. These devices are used in the Kii Channel HVDC transmission system in Japan. In this paper, we report the extracted problems of conventional testing methods of 8‐kV/3.5‐kA‐class light‐triggered thyristors among manufacturers, and the proposed unified testing methods on the basis of element characteristics and operating conditions in the Kii Channel HVDC system. Furthermore, we propose a figure of merit for power devices for the practical use, and try to extract elements used at the Kii Channel HVDC system with small margins and low withstand capabilities. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 140(3): 61–70, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10024     

单液晶光阀彩色大屏幕投影显示

设计一电路,将彩色图象信息编码到黑白CRT的亮度之中,并将其写入液晶光阀,用白光读出,当编码合适时,读出的象颜色可与原图像一致。本文讨论了这一技术原理并进行了单液晶光阀彩色大屏幕投影的实验验证。     

基于．NET气门尺寸检测系统软件架构设计

光学非接触检测是随着机械制造技术、计算机视觉技术、图像处理技术等发展而出现的新兴检测技术。传统人工手段对气门尺寸的检测往往存在效率低、可靠性差、检测精度不高、成本高、容易出错等弊端,采用光学非接触检测技术不仅可以提高检测的效率、精度和可靠性,同时可以降低成本和出错率。文中在阐述了系统的硬件结构和基本工作原理的基础上,通过分析实际生产需求,结合．NET技术框架,提出了符合实际需求的检测系统总体架构,并开发了汽车发动机气门尺寸自动检测系统,实现了系统各个功能模块并合理地解决了模块之间的联系,通过高精度算法检测出零件参数。该系统已应用于实际生产中,取得不错的效果。     

CF系列晶闸管触发器在机床电气中的应用

介绍一种新研发的CF系列晶闸管触发器及其在机床电气中的应用实例。     

晶闸管逆变式弧焊电源的主回路分析和设计

本文分析了晶闸管逆变式下降特性弧焊电源主回路的工作原理，指出了现有文献分析的不足之处，提出了逆变变压器的设计方法和换向电容、输出滤波电感电容的参数计算公式，并给出了设计实例。     

自动排气阀在污水箱涵管道上的应用

自动排气阀应用于大型污水压力输送管系，在国内尚属首例，该文证明自动排气阀的应用对长距离污水输送管道的正常运行、安全运行具有重要意义。并阐明了自动排气阀的工作原理、排气性能的理论分析和实际运行情况，克服了排气井给景观地区的周围环境带来的种种弊端，提高了该地区的环境质量。