Effects of Rare Earths on Toughness of 31Mn2SiRE Wear-Resistance Cast Steel

The toughness of 31Mn2SiRE wear-resistance cast steel were increased by means of RE compound modification and high temperature austenitizing. The results show that the microstructures can be refined, needle and network ferrite are eliminated, the dislocation density and the quantity of dislocated martensite are increased remarkably, and the shape and distribution of inclusions are improved by the addition of RE. Therefore, the mechanical properties of the modified steel can be greatly increased, especially the toughness (αK) by 44%, yield strength (σs) by 10%, and elongation (δ5) by 42%.     

ZG31Mn2Si履带板的铸造工艺

采用ＺＧ３１Ｍｎ２Ｓｉ替代ＺＧＭｎ１３生产拖拉机和推土机履带板．改进铸造工艺，可以生产出合格的铸件；经淬火、低温退火处理，其基体组织为马氏体，属强韧性钢种，能够切削加工．     

A new way for constructing high accuracy shock-capturing generalized compact difference schemes

The generalized compact (GC) schemes and some of their important properties are presented. And a new way for constructing high order accuracy and high-resolution GC schemes is presented. The schemes constructed by using this way could satisfy some principles and demands prescribed in advance to ensure some desired properties to the schemes, such as the principle about suppression of the oscillations, the principle of stability, the order of accuracy and number of scheme points, etc. As two examples, a three-point third-order compact scheme and a three-point fifth-order GC scheme satisfying the principle about suppression of the oscillations and the principle of stability are described in this paper. Numerical results show that these schemes are shock-capturing. The time-dependent boundary conditions proposed by Thompson are well employed when the algorithm is applied to the Euler equations of gas dynamics. Fourier analysis shows that the resolution characteristics are spectral-like.     

Isothermal Gas Forming of Mg Alloy AZ31 Sheet

There have been reports on sheet forming of Mg alloy in industry via the punch and die method;this paper is probably the first formal one for studying the sheet formability of AZ31 employing pressurized gas to press the sheet into a female die cavity at various elevated temperatures.The results indicate it is feasible to form a rectangular box via pressurized gas from extruded sheets of 0.5 and 1.7 mm thick.The formed box has 1:2 depth over width ratio,which should be large enough when dealing with realistic industrial sheet forming parts.Presently,forming a sheet of 0.5 mm thick is considered a technical challenge by industry,and it is conquered as demonstrated in this paper.Gas forming technique applied to Mg alloy is unprecedented and shows potential for industrial utilization.     

State psychological association creates a postdoctoral residency and internship training program.

State psychological associations can respond to supply and demand problems for postdoctoral residencies and internships by creating statewide training programs. A state psychological association training model is presented. The Arizona Psychological Association (AzPA) created a nonprofit subsidiary corporation- the Arizona Psychology Training Consortium-to increase the number of high-quality training opportunities in Arizona. The structure and operation of the program are described. The training model emphasizes cultural diversity, psychotherapy, and independent practice. Members of the practice community in Arizona serve as supervisors, trainers, and mentors. From 2001 through 2006, 19 postdoctoral residents and 51 interns completed the program. AzPA has benefited from increased student involvement. Many residents and interns later became association members. Arizona can serve as a model for other states that wish to help their professionals in training. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Identification of Tumor Suppressive Genes Regulated by miR-31-5p and miR-31-3p in Head and Neck Squamous Cell Carcinoma

We identified the microRNA (miRNA) expression signature of head and neck squamous cell carcinoma (HNSCC) tissues by RNA sequencing, in which 168 miRNAs were significantly upregulated, including both strands of the miR-31 duplex (miR-31-5p and miR-31-3p). The aims of this study were to identify networks of tumor suppressor genes regulated by miR-31-5p and miR-31-3p in HNSCC cells. Our functional assays showed that inhibition of miR-31-5p and miR-31-3p attenuated cancer cell malignant phenotypes (cell proliferation, migration, and invasion), suggesting that they had oncogenic potential in HNSCC cells. Our in silico analysis revealed 146 genes regulated by miR-31 in HNSCC cells. Among these targets, the low expression of seven genes (miR-31-5p targets: CACNB2 and IL34; miR-31-3p targets: CGNL1, CNTN3, GAS7, HOPX, and PBX1) was closely associated with poor prognosis in HNSCC. According to multivariate Cox regression analyses, the expression levels of five of those genes (CACNB2: p = 0.0189; IL34: p = 0.0425; CGNL1: p = 0.0014; CNTN3: p = 0.0304; and GAS7: p = 0.0412) were independent prognostic factors in patients with HNSCC. Our miRNA signature and miRNA-based approach will provide new insights into the molecular pathogenesis of HNSCC.     

Low temperature bonding of LD31 aluminum alloys by electric brush plating Ni and Cu coatings

0Introduction Amongavarietyofbondingtechnologies,vacuum brazinghasbeenwidelyadoptedasareliablemethodfor joiningaluminumcomponents[1],whereintheAl Sialloys systemisrecognizedasthemostpopularfillermetals[2,3]. Althoughasoundjointcanbeachievedforcertainalumi…     

冷却强度及变形程度对挤压AZ31镁合金组织性能的影响

选择AZ31镁合金为原材料,在400℃下挤压散热片型材,就冷却强度及变形程度对制品的性能(抗拉强度和导电率)及组织结构的影响进行研究。结果显示:挤压温度为400℃,制品经水冷却,变形程度大的型材具有更高的抗拉强度和导电率。     

Effect of temperature on mechanical behavior of AZ31 magnesium alloy

Strain rate sensitivity and tension/compression asymmetry of AZ31 magnesium alloy at different temperatures and strainrates were investigated.Both of mechanical behaviors are temperature dependent.Strain rate sensitivity increases with increasingtemperature.Thermally activated slip is the source of strain rate sensitivity.At the temperature below or near 373 K,strain ratesensitivity is very little.Tension/compression asymmetry in yielding decreases with increasing temperature.Twinning is the reasonof tension/compression asymmetry.At the temperature above or near 573 K,the material shows little tension/compressionasymmetry of the flow stress.     

Nucleation of isolated PO4 units on CeO2 driven by high temperatures and the effect on its oxygen storage and release properties

The chemical nature of P-containing species of varying concentration present in CeO₂ after impregnation with (NH₄)₂HPO₄ and calcination at 1273 K, and their effects on the oxygen storage and release (OSR) properties of ceria are reported for the first time. The samples were characterized by different techniques and the results were compared with those recently reported on the same samples but calcined at 873 K. When P-containing ceria solids were calcined at 1273 K, CePO₄ (monazite) was the predominant P-containing species on the surface of ceria, confirming previous studies that showed that monazite exists for those samples in which the surface P loading (P atoms per nm⁻²) is larger than 5.5. For lower surface P concentrations, isolated orthophosphate units are present at the surface and within the subsurface region of the solid. Severe sintering of CeO₂ after calcination at 1273 K resulted in P concentrations >5.5 P atoms·nm⁻² in all samples. Isolated PO₄ units that could initially be present in the samples calcined at 873 K nucleated and CePO₄ was formed when samples were calcined at 1273 K. OSR properties of CeO₂ deteriorated progressively when P loading increased due to the presence of larger crystals of the very stable Ce(III) phase of CePO₄ at the surface of the P-containing ceria solids.