亲电聚合路线合成聚醚醚酮酮砜的研究

用4,4′-二苯氧基二苯砜(DPODPS)分别与对苯二甲酰氯(TPC)、间苯二甲酰氯(IPC)或2,5-二氯对苯二甲酰氯(DCC)在1,2-二氯乙烷(DCE)中,以无水 AlCl_3为催化剂,在 N-甲基吡咯烷酮(NMP)存在下,通过付-克亲电聚合反应,制得了五种不同结构的聚醚醚酮酮砜(简称PEEKKS)。用红外光谱(IR)、X-射线衍射(XRD)、扫描电镜(SEM)、差示扫描量热(DSC)、热重(TG)及耐溶剂试验,对聚合物进行了表征。结果表明,五种聚合物的对数比浓粘度(η_(inh))均达到0.85以上.具有较低的熔融温度、良好的溶解性能和耐高温性能,PEEKKS 属于非晶态聚合物。     

Halogen-free acylation of toluene over FeSBA-1 molecular sieves

Three-dimensional cage type iron substituted mesoporous silica with different iron contents (FeSBA-1) was synthesized in a highly acidic media using cetyltriethylammonium bromide and tetraethylorthosilicate as a template and a silica source, respectively. Acylation of toluene with acetic anhydride (AA) was carried out over FeSBA-1 mesoporous catalysts with different n_Si/n_Fe ratios in the temperature range 80–180 °C for a time-on-stream of 1–6 h under liquid phase conditions. The important factors affecting the conversion and the selectivity of the reaction, such as the reaction temperature, feed ratio, catalyst weight and time-on-stream were studied and the results are discussed in detail. The reaction conditions were optimized and the n_AA/n_Toluene ratio of 2 and catalyst weight of 0.1 g (3.3 wt% of total reaction mixture) were maintained for all catalytic runs. It was found that the catalytic activity is strongly influenced by the amount of tetrahedral iron in the catalysts. Among the catalysts used in the present study, FeSBA-1(36) showed a high toluene conversion and selectivity to p-methylacetophenone (p-MAP) under the optimized reaction conditions. It was also found that the selectivity for p-MAP was always higher than m-MAP and o-MAP for all the catalysts and the activity of the catalysts changes in the following order: FeSBA-1(36) > FeSBA-1(90) > FeSBA-1(120).     

2,4-二氯-5-氟苯乙酮合成工艺研究

对2，4－二氯－5－氟苯乙酮的合成工艺进行了研究。以2，4－二氯氟苯和乙酰氯为原料，在催化剂AlCl3存在下反应，产物经溶剂萃取、蒸馏、结晶分离得产品。通过实验确定了最佳原料配比、反应温度、反应时间等工艺参数，选择溶剂A为萃取剂，产品收率可达80％左右。     

碘掺杂聚苯胺催化合成乙酸叔丁酯

以碘掺杂聚苯胺为催化剂,对叔丁醇与乙酸酐之间的酰化反应进行了研究,考察了反应温度、反应时间、催化剂质量分数以及酐醇摩尔比对乙酸叔丁酯收率的影响。实验结果表明,碘掺杂聚苯胺有着较好的催化活性,当反应条件为:反应温度为55℃,反应时间为6 h,酐醇摩尔比为1∶1,催化剂质量分数为7.0%时乙酸叔丁酯的分离收率可达到87.6%,且所得产品无色透明。产品经红外光谱进行了表征。     

Thermosensitivity control of polyethlyenimine by simple acylation

Branched polyethylenimine (b-PEI), an amine-rich polymer, can obtain thermosensitivity by a simple acylation reaction. The resulting N-acylated b-PEI derivatives showed a similar lower critical solution temperature (LCST) transition as their linear correspondent, poly(N-alkyloxazoline). Three acyl groups (propionyl, and isobutyryl, and n-butyryl) were introduced and resulted in LCSTs ranging from 10 °C to 90 °C depending on the structure and environment. The hydrophobicity of N-acylated b-PEI can be controlled by varying the acyl group and degree of acylation. Because the LCST transition is determined by the delicate balance between the hydrophobicity and hydrophilicity of the polymers, an increase of the hydrophobicity in N-acylated b-PEI lowers the transition temperature. Also, N-acylated b-PEI contains tertiary amines as well as unacylated primary or secondary amines which can be protonated during acidification from a pH of 7.4 to a pH of 5.5. The LCST transition was observed at elevated temperatures due to the increase of hydrophilicity by the protonation in the acidic environment. The LCST was also influenced by the salt concentration. A decrease of the LCST was observed as the NaCl concentration increased, probably due to the dominance of the salting-out effect. The very simple introduction of thermosensitivity into pre-existing polymers can be easily applied for the development of various dual or multiple signal-sensitive polymer systems.     

Electrogenerated N-heterocyclic carbene: N-acylation of chiral oxazolidin-2-ones in ionic liquids

An electrochemical procedure for the N-acylation of chiral oxazolidin-2-ones, in the absence of volatile molecular organic solvents, has been set up via electrolyses of ionic liquid [bmim]BF₄ containing oxazolidin-2-ones followed by addition of saturated or unsaturated anhydrides. N-acyloxazolidin-2-ones were isolated in good to elevated yields. The electrochemically induced N-acylation of chiral oxazolidin-2-ones occurs with total retention of the absolute configuration of all the chiral atoms. The electrogenerated carbene (1-butyl-3-methyl-1H-imidazol-2-ylidene) has been indicated as the base involved in the deprotonation of chiral oxazolidin-2-ones.     

Activation of ethyl acetate over metal substituted MCM-41: application to alkylation and acylation

Al-MCM-41, Fe,Al-MCM-41 and Zn,Al-MCM-41 materials with different silicon to metal ratios were synthesized hydrothermally and characterized by XRD, BET, FT-IR, Acidity measurement by pyridine adsorbed FT-IR spectroscopy, ²⁹Si and ²⁷Al MAS NMR and ESR techniques. The orderly arrangement of mesoporous materials was clearly revealed from the XRD patterns. ²⁹Si and ²⁷Al MAS NMR established the co-ordination environment of silicon and aluminium. Electron paramagnetic resonance (EPR) study confirmed the co-ordination environment of Fe in Fe,Al-MCM-41 framework. The catalytic activity of these materials was evaluated in the vapour phase alkylation and acylation of ethylbenzene with ethyl acetate in the temperature range between 250 and 400 °C. The products were found to be 1,3-diethylbenzene (1,3-DEB), 1,4-diethylbenzene (1,4-DEB), 1,2-diethylbenzene (1,2-DEB), 4-ethylacetophenone (4-EAP) and acetophenone (AP). The reaction products revealed that activation of ethyl acetate is a convenient route for both alkylation and acylation reactions. The order of the catalysts activity for the reaction is found to be Fe,Al-MCM-41 (50) > Fe,Al-MCM-41 (100) > Zn,Al-MCM-41 (50) > Zn,Al-MCM-41 (100) > Al-MCM-41 (50) > Al-MCM-41 (100). In addition to the density of acid sites, the strength of acid sites is also important for this reaction. The effects of temperature, feed ratio, WHSV and time on stream were also examined and the results are discussed.     

Cerium-containing MCM-41 materials as selective acylation and alkylation catalysts

The synthesis of Ce–MCM-41, Al–MCM-41 and Ce–Al–MCM-41-type mesoporous materials was carried out hydrothermally by refluxing the gel with magnetic stirring under atmospheric pressure for 24–36 h. The samples were characterized thoroughly in order to obtain the structural and textural properties, which reveal the presence of well-ordered M41S-type materials. The Ce–MCM-41 samples were used for catalytic acylation of alcohols, thiols, phenols and amines show good activity and selectivity including high chemoselectivity towards selective monofunctional acylation of bifunctional compounds. Quite importantly the acylation of bulky molecules such as cholesterol, ergesterol and β-sitosterol could be achieved using Ce–MCM-41 as solid catalyst. The presence of Ce along with Al in Ce–Al–MCM-41 was found to have synergistic effect as Ce–Al–MCM-41samples were more active catalysts for alkylation of naphthalene compared to either Ce–MCM-41 or Al–MCM-41 with comparable Si/Al or Si/Ce molar ratio.     

Simultaneous hydrogenation and hydroacylation of vinyl groups in polybutadiene by use of a rhodium catalyst

Vinyl groups in phenyl-terminated polybutadiene (1a) containing 99% unsaturation (27% vinyl group, 73% internal olefin), and for which the average M_n is 3400, were simultaneously hydrogenated and hydroacylated with various aromatic or heteroaromatic primary alcohols in the presence of the catalytic system RhCl₃.H₂O, PPh₃ and 2-amino-4-picoline. Sterically less hindered alcohols, such as benzyl alcohol, showed greater reactivity than sterically more hindered alcohols, such as 2-naphthylmethanol and heteroaromatic primary alcohols. Vinyl groups in phenyl-terminated polybutadiene (1b) containing 99% unsaturation (45% vinyl group, 55% internal olefin) and for which the average M_n is 1300 also showed similar reactivity toward various primary alcohols under identical reaction conditions.     

Lipase-catalyzed acylation of <Emphasis Type="SmallCaps">l</Emphasis>-carnitine with conjugated linoleic acid in [Bmim]PF<Subscript>6</Subscript> ionic liquid

Improving significantly the acylation reaction of l-carnitine with conjugated linoleic acid catalyzed by lipase needs to select an efficient and suitable reaction medium that is not only polar but also hydrophobic. [Bmim]PF₆ which is satisfied with the above two requirements was applied as the reaction medium. The optimal reaction conditions were: Novozyme 435 as the catalyst, 5:1 of molar ratio of fatty acid to l-carnitine, 40 g L⁻¹ lipase, 0.22 a_W of initial water activity, 125 g L⁻¹ molecular sieves (they were added within 0–3 h of reaction time), 60 °C of reaction temperature, 200 rpm of rotation speed, 32 h of reaction time. The overall conversion could reach 98.27%. The conversion in [Bmim]PF₆ was 2.13 and 1.56 times higher than that in acetonitrile and in solvent-free system, respectively. The lipase in the present work could be used eight times. [Bmim]PF₆ as the reaction medium was better than acetonitrile and solvent-free system.