Induced slim ferroelectric hysteresis loops and enhanced energy-storage properties of Mn-doped (Pb0·93La0.07)(Zr0·82Ti0.18)O3 anti-ferroelectric thick films by aerosol deposition

In this study, the high ferroelectric hysteresis loss of (Pb_0·93La_0.07)(Zr_0·82Ti_0.18)O₃ (PLZT 7/82/18) antiferroelectric (AFE) ceramics was reduced by employing a combinatorial approach of Mn acceptor doping followed by thick film fabrication via an aerosol deposition (AD) process. The grains of the as-deposited PLZT 7/82/18 AFE AD thick films were grown by thermal annealing at 550 °C to enhance their electrical properties. Investigation of the electrical properties revealed that Mn-doping results in improved dielectric and ferroelectric properties, increased dielectric breakdown strength (DBS), and energy-storage properties. The Mn-doped PLZT AFE AD films possess a frequency-independent high dielectric constant (ε_r ≈ 660) with low dielectric loss (tan δ ≈ 0.0146), making them suitable candidates for storage capacitor applications. The bipolar and unipolar polarization vs. electric field (P-E) hysteresis loops of PLZT 7/82/18 AFE AD thick films were found to be slimmer than those of their bulk form (double hysteresis) with significantly reduced ferroelectric hysteresis loss, which is attributed to the AD-induced mixed grain structure. The Mn-doped PLZT 7/82/18 AFE AD thick films exhibited a low remnant polarization (P_r ≈ 9.22 μC/cm²) at a high applied electric field (~2750 kV/cm). The energy-storage density and energy efficiency of the Mn-doped PLZT AFE AD thick films were calculated from unipolar P-E hysteresis loops and found to be ~38.33 J/cm³ and ~74%, respectively.     

Development of a novel algorithm for optimal capacitor placement in distribution systems

Optimal capacitor placement in distribution systems solved by the hybrid method of CODEQ (called HCODEQ method) is proposed in this work. The concepts of chaotic search, opposition-based learning, and quantum mechanics are used in the CODEQ method to overcome the drawback of parameters selection in the differential evolution (DE). However, a larger population size must be used in the CODEQ method. That is a drawback for all evolutionary algorithms (EAs). To overcome this drawback, acceleration operation and migrating operation are embedded into the CODEQ method, i.e. HCODEQ method. The use of these two operations can increase the convergence speed without decreasing the diversity among individuals. One benchmark function and various-scale capacitor placement systems are used to compare the performance of the proposed method, CODEQ method, DE, simulated annealing (SA), and ant system (AS). Numerical results show that the performance of the HCODEQ method is better than the other methods.     

工艺因素对金属封装外引线弯曲疲劳的影响

考察了金属封装外壳制造工艺对外引线弯曲疲劳的影响,发现电镀镍是导致外引线弯曲次数明显减少的最主要工艺步骤,且随镀镍层厚度的增加,弯曲次数减少。此外还讨论了外引线的氢含量和晶粒度对引线抗疲劳能力的影响。     

Investigation on vapor-cooled current leads operating in a pulse mode

This paper describes transient numerical modeling for thermal characteristic of vapor-cooled current leads under pulse operation. The transient thermal analysis considers the temperature difference between a helium gas flow and a copper lead with temperature dependent properties of helium gas, copper and stainless steel. The numerical analysis was validated by an experiment with commercially available 100 A vapor-cooled current leads. A proper overloading factor calculation and the effect of intermediate cooling are presented for the current leads under pulse operation, which can significantly reduce heat input to a cryostat.     

SF6气体绝缘电容式电压互感器研制

本文介绍西容公司新研制的一种完全无油化的SF6气体绝缘电容式电压互感器,提出了关键技术问题解决方案和产品绝缘结构的设计思路.并介绍了研制成功的110kV和220kV系列产品的结构、技术参数、性能指标、试验考核情况和产品特点.     

IGBT无损吸收网络的设计

提出一种模块化IGBT无损吸收网络，介绍了其缓冲吸收原理、元件参数计算及一些注意事项。     

一种基于相关函数法铁磁谐振波形研究

对铁磁谐振波形进行了系统的分类分级,提出了一种基于Matlab的相关函数方法,并且利用大量数据进行对比,已经得到了效果验证,经过桂林市电力电容器责任有限公司认证,具有良好的实际效果。     

以天然产物为先导化合物开发的农药品种(Ⅱ)--杀虫杀螨剂

概述了以天然产物为先导化合物进行的杀虫杀螨剂的创制研究以及开发的品种，涉及的化合物或类别如氨基甲酸酯、拟除虫菊酯、沙蚕毒素类似物、吡咯类、新烟碱类、保幼激素类似物、双酰肼(蜕皮激素类似物)、鱼藤酮类似物、二烯酰胺、季酮酸类、嘧螨酯、灭螨醌等，并对部分化合物的生物活性和创制经纬等进行了概述。     

Electrodeposition of polypyrrole on aluminium in aqueous tartaric solution

The electrosynthesis of polypyrrole (PPy) has been achieved on aluminium in aqueous medium of tartaric acid by means of cyclic voltammetry, potentiostatic and galvanostatic techniques. Scanning electron microscopy (SEM) and X-ray microanalysis by energy spectroscopy dispersion (EDS) applying on surfaces show that the PPy coating is developed from the metal surface through the cracks of the initial Al₂O₃ layer.A mechanism involving the participation of the supporting electrolyte and the pyrrole (Py) in distinct active sites was proposed based on the linear sweep voltammetry. It is observed for all applied electrochemical techniques that the pyrrole concentration has to be higher than 0.1 M to allow the polypyrrole electrodeposition in acid medium.Scanning electron microscopy, secondary electrons (SE) and backscattering electrons (BE), shows that the PPy coating obtained in galvanostatic and potentiostatic modes starts with small islands at weak applied potentials or current densities. Moreover, EDS reveals a good homogeneity and compactness of the film achieved in galvanostatic method. The corrosion results in 3% NaCl medium show that the PPy coating decreases the corrosion behaviour of the aluminium. The bilayer Al₂O₃/PPy shows a capacitor with future applications.