"毛虫"建筑--一次装配建筑的实验

文章详细介绍了瑞士霍夫·威施巴德餐厅因苛刻的条件而采用的特殊的设计建造的方法和过程——在基地外的一次预制装配的预演实验,同时也分析了该项目在设计上由于考虑适合装配生产特点而形成的空间效果。     

Characterization of the Residence Time Distribution in Spray Dryers

In this work it is presented a study on the residence time distribution (RTD) of particles in a co-current pilot-plant spray dryer operated with a rotary atomization system. A nuclear technique is applied to investigate the RTD responses of spray dryers. The methodology is based on the injection of a radioisotope tracer in the feed stream followed by the monitoring of its concentration at the outlet stream. The experiments were performed during the drying of aqueous suspensions of gadolinium oxide. The RTD responses obtained experimentally presented good reproducibility, indicating that the technique applied is well suited to investigating fluid-dynamics of spray dryers. In addition to the experimental investigation, a mathematical model was used to describe the RTD experimental curves.     

野外大气扩散试验中四面体气球示踪实验的初步评价

1985年11月在瑞士北部进行了一次以探讨“冷池”条件下的扩散和湍流特征为目的的国际野外大气试验,本文介绍其中的四面体气球示踪实验的结果。一共进行了三次由雷达跟踪的四面体示踪实验,释放了10个四面体球。按多轨迹法和单轨迹法分别估算并比较了其中两次示踪实验得到的水平扩散参数σ_y,探讨了风摆效应的贡献。采用“体源模式”并结合单轨迹法估算了微弱风场不定风向条件下的扩散参数,分析了静风,弱风条件下的水平风向标准差和湍流强度。     

数控超声加工的初步工艺试验

介绍在经过数控化改造的两坐标超声加工机床上所进行数控超声加工的初步工艺试验,并讨论试验结果。     

The Design of Discrimination Experiments

Experimentation plays a fundamental role in scientific discovery. Scientists experiment to gather data, investigate phenomena, measure quantities, and test theories. In this article, we address the problem of designing experiments to discriminate between two completing theories. Given an initial situation for which the two theories make the same prediction, the experiment design problem is to determine how to modify the situation such that the two theories make different predictions for the modified situation. The modified situation is called a discrimination experiment. We present a knowledge-intensive method called DEED for designing discrimination experiments. The method analyzes the differences in the two theories' explanations of the prediction for the initial situation. Based on this analysis, it determines modifications to the initial situation that will result in a discrimination experiment. We illustrate the method with the design of experiments to discriminate between several pairs of qualitative theories in the fluids domain.     

屏蔽暂堵反排解堵效率的实验分析

在一定实验条件下，屏蔽暂堵的反排解堵效率随压差、温度的增大而增大，反排解堵在很短的时间内就可完成。一般的反排解堵率都在60％以上，但反徘不能完全解堵。     

利用先进的结构试验系统进行发动机构件的仿真疲劳试验

本文介绍一套先进的构件实验设备的功能及其在发动机构件疲劳试验方面的具体应用实例．通过对几种受力较复杂构件的受力分析设计出实验方法，使构件在实验室中受力情况与构件实际受力情况相似或相同，这样，得出的试验数据就可为构件的可靠性分析工作提供较好的依据．     

Determining stress intensity factors of composites using crack opening displacement

The main purpose of this paper is to find the mixed-mode stress intensity factors of composite materials using the crack opening displacement (COD). First, a series solution of the composite material with a crack was used to evaluate COD values. Then, the least-squares method was used to calculate mixed-mode stress intensity factors. This algorithm can be applied to any method that generates or measures COD values. The major advantage of this method is that COD values very near the crack tip are not necessary. Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.     

从含钴催化剂废料中回收氧化钴的研究

选用酸溶——沉淀化学法，对含钴催化剂废料提取氧化钴的实验研究。实验结果表明，回收氧化钴产品中含钴量71％，氧化钴的实收率85％。同时将铁回收为铁红产品（含Fe2O3≤65％），铁的实收率高达88％。其它的技术经济指标较高。这是一种工艺技术及设备可行的新途径。     

正交试验在摩擦焊工艺参数优化中的应用

通过正交试验得出摩擦焊工艺参数中对接头抗拉强度的影响的顺序是摩擦压力、顶锻压力、摩擦时间。为在生产实际中制定摩擦焊接工艺规范提供了重要的参考依据。