Revisiting rock classification to estimate rock mass properties

This paper presents the results of ongoing research carried out by the author exploring methods to provide a more robust estimate of rock mass properties specifically for use in tunnel design. Data from various large-scale rock mass failures are introduced, including coal pillars. The damage-initiation,spalling-limit approach is compared to the coal pillar database. New comparisons of estimating the geological strength index(GSI) and relationships to estimate the Hoeke Brown failure criterion parameters, mb, s and a, are presented.     

琼北福山凹陷大地电磁测深资料地质解释

根据琼北福山凹陷两条大地电磁测深试验剖面，可将凹陷自上而下分为５个电性层，并确定其对应的地质属性。利用大地电磁测深资料可以确定断层和局部构造。文中通过试验说明大地电磁测深法的正确性和可行性。     

用人工神经网络作地质数据分析

本文提出了利用人工神经网络进行地质数据多变量分析的方法，研究表明，此方法具有精度高、运算速度快、算法简单易于编程等显著特点，是地质数据分析中一有效方法。     

油气圈闭地质评价方法及应用

本从含油气系统理论出发，对圈闭成藏的油源，储层，圈闭，保存，配套史制定分级评价标准，并赋予相应的评价系数，在此基础上应用地质风险概率理论与模糊数学的方法，在微机上定量评价圈闭含油气性。     

水溶液辐射分解产物对金属材料腐蚀的影响

实验研究了水辐射分解作用对高放废物深地质处置容器材料的影响。在高放废物深地质处置库附近的地下水,受辐射线作用后分解出氧、氢和氧化产物(例如H_2O_2等),于是在高放废物容器周围形成一个氧化场,导致高放废物中的某些重要放射性核素(例如U,Np和Tc)易溶于水,并向远域迁移。本实验中的含FeSO_4(0.13 mol/L)水溶液在吸收剂量为0、20、60、180、500kGy的射线作用下,其氧化还原电位(Eh)值由+357mV增至+414 mV;在不同吸收剂量的射线作用下,金属Cu、金属Al、0.357 mv金属Fe和不锈钢(后者是我国拟采用的高放废物包装容器材料),在水溶液中的氧化侵蚀强度,分别比在无辐射情况下的大0.2-6.1倍。     

地质超前预报和动态施工在隧洞施工中的应用

通过在直峰架洞施工过程中，地质超首预报与隧洞动态施工的结合，将国际岩体质量分级到生产实践中，针对不同级别的岩级，应用相应的施工方案，以达到为隧洞篱工总结经验的目的。     

新型呋咱(氧化呋咱)类炸药爆轰参数的理论计算

以3,4-二(氨基呋咱基)氧化呋咱(BAFF)为结构单元设计了一类新型呋咱(氧化呋咱)类炸药分子.运用预测炸药分解产物的BW法则、计算爆速的Rothsteine方法和计算C-J压力的库珀方法等对该类炸药的爆炸参数进行了理论计算,并与HMX等炸药的爆炸参数进行了比较.结果表明,该类炸药的密度大,爆速和爆压介于TATB和HMX之间,是一类新型高能量密度材料化合物.由于该类炸药分子中含呋咱环具有芳香性,预测其分子的稳定性良好.     

Advancements in the design and validation of an air pollution integrated assessment model for Spain

This paper describes the design and application of the Atmospheric Evaluation and Research Integrated model for Spain (AERIS). Currently, AERIS can provide concentration profiles of NO₂, O₃, SO₂, NH₃, PM, as a response to emission variations of relevant sectors in Spain. Results are calculated using transfer matrices based on an air quality modelling system (AQMS) composed by the WRF (meteorology), SMOKE (emissions) and CMAQ (atmospheric-chemical processes) models. The AERIS outputs were statistically tested against the conventional AQMS and observations, revealing a good agreement in both cases. At the moment, integrated assessment in AERIS focuses only on the link between emissions and concentrations. The quantification of deposition, impacts (health, ecosystems) and costs will be introduced in the future. In conclusion, the main asset of AERIS is its accuracy in predicting air quality outcomes for different scenarios through a simple yet robust modelling framework, avoiding complex programming and long computing times.     

A comprehensive approach to evaluating watershed models for predicting river flow regimes critical to downstream ecosystem services

Selection of strategies that help reduce riverine inputs requires numerical models that accurately quantify hydrologic processes. While numerous models exist, information on how to evaluate and select the most robust models is limited. Toward this end, we developed a comprehensive approach that helps evaluate watershed models in their ability to simulate flow regimes critical to downstream ecosystem services. We demonstrated the method using the Soil and Water Assessment Tool (SWAT), the Hydrological Simulation Program–FORTRAN (HSPF) model, and Distributed Large Basin Runoff Model (DLBRM) applied to the Maumee River Basin (USA). The approach helped in identifying that each model simulated flows within acceptable ranges. However, each was limited in its ability to simulate flows triggered by extreme weather events, owing to algorithms not being optimized for such events and mismatched physiographic watershed conditions. Ultimately, we found HSPF to best predict river flow, whereas SWAT offered the most flexibility for evaluating agricultural management practices.     

用基因表达式编程生成数字高程模型

数字高程模型是地理信息系统进行地形分析的基础。在处理采样点缺失时,常用的空间插值方法难于客观地确定插值函数结构和参数。本文将基因表达式编程技术应用到数字高程模型的生成中,做了下列工作：（1）形式化描述高程基因,缓冲区和簇等概念;（2）证明了深度定理及引理;（3）提出了缓冲区策略（BS）,适时注入优质高程体;（4）提出了动态簇的搜索算法（DCSA）,方向搜索相关点算法（SCPD）和象限扩展搜索算法（ESDA）,按方向动态扩展搜索簇,避免了冗余点的计算;提出了移动拟合GEP算法（EF-GEP）,插值空间细分,缩小了拟合空间;（5）实验表明新方法是有效的,平均进化代数为227代,平均最高适应度为97.4527,提高了7.23%。三维地质模型形象地表达出了地质体形态结构。