小井距开发现河油田低渗油藏可行性研究

认为注采井网井距大,水驱控制程度差,采收率偏低是影响胜利油田现河低渗透油藏开发的关键,通过井间密度与水驱控制程度和采收率的关系等分析,提出了现河低渗透油藏开发的合理的井网密度。     

45号钢二次枝晶臂间距与冷却速度的关系

本文利用可控平均冷却速度的单向凝固实验炉测定了４５号钢在不同平均冷却速度下的冷却曲线，由此得到其在凝固期间的平均冷却速度Ｒ，相应地测量了不同平均冷却速度下试样的二次枝晶臂间距Ｓ２，通过回归，得到了如下关系式：Ｓ２＝７２７Ｒ－０．４１，并将引式成功地应用于实际生产中。     

Effects of circumferential pick spacing on boom type roadheader cutting head performance

Effects of equal and unequal circumferential pick spacing on the performance of boom type roadheaders having cylindrical cutting heads are investigated. For this purpose, two experimental cutting heads with equal and unequal circumferential spacing are designed and manufactured. The cutting head with unequal circumferential spacing is specifically designed to prevent tool-holder overlap at the nose section. Manufacturing difficulties associated with equal circumferential pick spacing due to tool-holder overlap are discussed with solid modeling and practical applications. The heads are tested at Park Cayirhan Coal Mine in Turkey and their cutting performances are analysed. Although better cutting performance for equal circumferential spacing are predicted by force–balance analysis, in situ measurements of instantaneous (net) traversing speed and cutting rate, pick consumption rate and machine vibration show that no significant difference exists between the performances of the two cutting heads.     

全层状TiAl合金层片生长及其影响因素

利用光学显微镜(OM)和TEM，研究了全层状TiAl合金的层片间距的影响因素及与各因素的关系。实验结果表明，全层状TiAl合金的层片间距与冷却速度和合金中铝含量有关，层片间距与冷却速度呈反比关系，并随着合金中铝含量的增加而增加。同时，以层片生长的台阶机制为基础，推导出了全层状TiAl合金在连续冷却过程中层片间距的数学表达式，推导结果与实验结果相符。     

Effect of lamellar spacing on microstructural instability and creep behavior of a lamellar TiAl alloy

Finer lamellar spacing in the lamellar structure of a Ti–45Al–2Nb–2Mn + 0.8 vol.%TiB₂ (45XD) alloy does improve the primary creep resistance. However, the unstable nature of the fine plate contributes largely to the degradation of the lamellar structure and a rapid increase in the tertiary creep rate, indicating that a fine lamellar structure has a detrimental effect on the long-term creep.     

凝固速率对定向凝固合金DZ22枝晶臂间距和枝晶偏析的影响

采用新研制的超高梯度定向凝固装置，研究了不同凝固速率下定向凝固高温合金ＤＺ２２枝晶臂间距和枝晶偏析。结果表明，冷运速率增大，枝晶臂间距显著细化，枝晶偏析被强烈抑制。当冷运速率为５２．４Ｋ．ｓ＾－１时，一次、二次枝晶臂间距λ１和λ２分别为２８．８和８．４μｍ，Ｎｂ，Ｔｉ，Ａｌ，Ｃｒ，Ｃｏ，Ｗ等元素的偏析比均趋近于１。     

Crack elongation and its width of large depth reinforced concrete beams

In order to meet the requirement of structural inspection,the crack spacing and crack width at various heights in the tensile zone of six large depth reinforced concrete beams were measured under several loading levels of serviceability state.The effects of the depth of normal section beams on the crack spacing and crack width were analyzed,and the modified model is proposed for calculating the average crack spacing by thinking about the depth of normal section,the reinforcement arrangement and the effective reinforcement ratio.The relationships of crack widths at any position in the tensile zone and at the reinforcement level on the side surface of beam were studied.By theoretical and statistical analysis,a method is proposed to calculate the ratios of crack widths between any position and the reinforcement level on the side surface of large depth reinforced concrete beams.     

交叉极化天线阵列信道的相关性

针对符合多簇拉普拉斯分布的功率角度谱,推导了适用于均匀线阵和均匀圆阵信道相关性的闭式表达式. 该表达式反映了信道角度功率谱以及交叉极化鉴别率对信道相关性的影响. 比较了具有相同角度扩展的单簇与多簇拉普拉斯角度功率谱引入信道相关性的差异. 分析了簇内角度扩展不同时,天线阵列信道相关性随均匀线阵天线间距或均匀圆阵半径的变化. 给出了簇内平均角和簇内角度扩展分别取不同值时,信道交叉极化鉴别率对应的等效天线间距.     

高速铁路长大桥梁救援定点的选址决策模型

为提高高速铁路的防灾能力,确保救援定点布局经济合理,采用约束最优化法进行长大桥梁救援定点的选址决策.研究分析救援定点选址决策的3个约束条件:设置间距、风险等级和救援时程.以各地方救援部门至救援定点的时程总和最小为目标,建立长大桥梁救援定点的选址决策模型,并对模型进行实例验证.结果表明:当区间桥梁长度大于10 km时,应该沿线路方向每隔约6~10 km设置一处救援定点;应用贝叶斯网络理论评价救援定点备选位置的风险等级和采用Dijkstra算法求解地方救援部门至救援定点之间的最优时程是合理有效的.该模型计算过程简单,评价结果可靠,能够较好地解决长大桥梁救援定点的选址决策问题.     

A practical application of photogrammetry to performing rib characterization measurements in an underground coal mine using a DSLR camera

Understanding coal mine rib behavior is important for inferring pillar loading conditions as well as ensuring the safety of miners who are regularly exposed to ribs. Due to the variability in the geometry of underground openings and ground behavior, point measurements often fail to capture the true movement of mine workings. Photogrammetry is a potentially fast, cheap, and precise supplemental measurement tool in comparison to extensometers, tape measures, or laser range meters, but its application in underground coal has been limited. The practical use of photogrammetry was tested at the Safety Research Coal Mine, National Institute for Occupational Safety and Health(NIOSH). A commercially available, digital single-lens reflex(DSLR) camera was used to perform the photogrammetric surveys for the experiment. Several experiments were performed using different lighting conditions, distances to subject,camera settings, and photograph overlaps, with results summarized as follows: the lighting method was found to be insignificant if the scene was appropriately illuminated. It was found that the distance to the subject has a minimal impact on result accuracy, and that camera settings have a significant impact on the photogrammetric quality of images. An increasing photograph resolution was preferable when measuring plane orientations; otherwise a high point cloud density would likely be excessive. Focal ratio(F-stop) changes affect the depth of field and image quality in situations where multiple angles are necessary to survey cleat orientations. Photograph overlap is very important to proper three-dimensional reconstruction, and at least 60% overlap between photograph pairs is ideal to avoid unnecessary post-processing. The suggestions and guidelines proposed are designed to increase the quality of photogrammetry inputs and outputs as well as minimize processing time, and serve as a starting point for an underground coal photogrammetry study.