分析矩形光波导损耗的简易方法

利用有效折射率和修正的有效折射率方法对矩形光波导的损耗作了简单有效的分析，并且计算出了纵向传播系数和衰减系数的大小。     

迭代回归法计算T型电位滴定中试液含量

本文将迭代回归法计算Ｔ型电位滴定中，叙述了其原理及数学推导，并运算了一批实验数据，结果表明，该法准确度较高，且不需空白溶液校正。     

非理想截面脊形介质光波导导波模式的研究

提出了一种求解任意截面形状脊形光波导的方法，先利用有效折射率的概念解出某种截面形状脊形光波导的等效折射率，再利用转移矩阵的理论求解出波导的模式色散方程。     

A TVD Scheme for Incompressible Flow Coupled With Different Turbulence Modles on A Ground-Mounted Square-RIB Flow

A finite-difference Total Variation Diminishing (TVD) numerical simulation model for coupling the Reynolds Averaged Navier-Stokes (RANS) equations, pressure-relative continuity equation and various k-ε turbulence models was developed to solve the incompressible flow based on the pseudo-compressibility method. The hyperbolicity of all these equations was studied and the discretization of the fully coupling equations with all the primal variables and source terms were made in this article. Numerical simulation for modeling the flow around a ground-mounted square rib was implemented and validated by comparing with the published wind tunnel experimental data. It is shown that such a numerical simulation method with a proper turbulence model has a very good accuracy to simulate the flow around a surface-mounted rib. It is concluded that the Renormalization Group (RNG) and Chen-Kim k-ε turbulence models have much better ability to predict the characteristics of the vortex structure and flow separation than the standard k-ε model.     

浅谈中承式钢管拱肋单拱桥的施工方法

右江平圩大桥钢管拱肋的制作、拼装、吊装、混凝土灌注的施工方法及注意事项 ,事故原因分析及处理。     

Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.     

Effect of intensified discharge in the vicinity of ribs on PDP performance

It was determined that the discharge in the vicinity of ribs should be intensified to obtain low‐voltage, high‐luminous efficacy, and high module efficiency. One possible way is to increase the space between ribs and the discharge surface. Even if the amount of space increases by only 2 or 3 µm, it still results in low discharge voltage, large discharge current, and high luminous efficacy. For that reason it might be important to control the micron‐sized particles included in the MgO crystal dispersed layers. Another preferable way is to use ribs with a low electric permittivity (ε) that are represented by porous ribs. Moreover, low‐ε ribs diffuses the high‐energy spots in plasma, resulting in a high luminous efficacy. They feature a significantly lower sustain voltage and a smaller parasitic capacitance as well to facilitate a help high module efficiency. Also, highly porous ribs are expected to increase their practical use in aspects of mechanical strength and impurity gas exhaustion.     

具有直流故障穿越能力的模块化多电平换流拓扑推演与对比

直流故障具有影响范围广、故障电流大的特征,已成为制约直流系统发展的重要因素之一。模块化多电平换流器可通过配置双极性子模块实现直流故障穿越,但相比于基于半桥子模块的拓扑,其建造成本与运行损耗均大幅增加。为寻求兼顾硬件成本、运行效率与直流故障穿越能力的模块化多电平换流拓扑,首先通过拓扑抽象定义与模块配置约束,遍历并推导出4大类共13种模块化多电平换流拓扑;进而优选出T型桥臂交替多电平换流器,并提出桥臂移相导通调制,实现其高效功率变换与直流故障穿越的兼顾;最后,计及硬件成本、运行损耗、可靠性与可实现性等维度,对各类具有直流故障穿越能力的拓扑进行了系统性对比,为具有故障穿越能力需求的交直流变换场景提供模块化多电平换流拓扑的选择依据。     

金属网架天线罩中金属梁杆的感应电流矩量法分析

用矩量法对金属网架天线罩中金属梁杆的感应电流率进行了理论分析,并利用此方法对导电圆柱体的感应电流率进行了仿真分析,数值仿真结果与经典方法吻合较好。针对常规矩量法在处理规则矩形柱体感应电流率中存在的问题提出了改进模型,结果可较理想地满足工程设计的需要。     

Extraction of locked-up coal by strengthening of rib pillars with FRP——A comparative study through numerical modelling

In some of the coalfields in India, coal seams are only developed but no extraction of pillars is possible due to the presence of surface or sub-surface structures and also non-availability of stowing materials which leads to huge amounts of coal being locked-up underground. Spontaneous heating and fire, accumulation of poisonous gases, severe stability issues leading to unsafe workings and environmental hazards are the major problems associated with the developed coal pillars. So, there is a pressing need for a technology for the mining industry to extract the huge amount of coal locked-up under different constraints. In this study, the locked-up coal is proposed to be extracted by artificially strengthening the rib pillars. The detailed comparative study is carried out to know the increase of extraction percentage of locked-up coal by strengthening the rib pillars with FRP. Extraction methodology is designed and studied through numerical modelling for its stability analysis to evaluate its suitability of application in underground.