A hybrid homogeneously weighted moving average control chart for process monitoring: Discussion

The sensitivity of a monitoring scheme depends on many factors including the variance of the charting statistic which is very important in the computation of the control limits. This paper discusses the computation of the variance of the recently proposed hybrid homogeneously weighted moving average (HHWMA) $\overline{X}$ scheme which was based on an incorrect assumption. The correct variance is used to evaluate the run-length characteristics of the HHWMA $\overline{X}$ scheme. It is observed that the incorrect variance has a significant impact on the sensitivity (or performance) of the HHWMA $\overline{X}$ scheme.     

A hybrid homogeneously weighted moving average control chart for process monitoring

Several modifications and enhancements to control charts in increasing the performance of small and moderate process shifts have been introduced in the quality control charting techniques. In this paper, a new hybrid control chart for monitoring process location is proposed by combining two homogeneously weighted moving average (HWMA) control charts. The hybrid homogeneously weighted moving average (HHWMA) statistic is derived using two smoothing constants λ₁ and λ₂ . The average run length (ARL) and the standard deviation of the run length (SDRL) values of the HHWMA control chart are obtained and compared with some existing control charts for monitoring small and moderate shifts in the process location. The results of study show that the HHWMA control chart outperforms the existing control charts in many situations. The application of the HHWMA chart is demonstrated using a simulated data.     

Affective matches of fabric and lighting chromaticity

This study investigates the impact of lighting colors on subjective judgments of fabric: in particular, whether the influence of lighting varies depending on fabric types and color combinations. We conducted two visual assessments. In Study 1 (N = 44), eight illuminants and six types of fabric were presented as cloth stimuli. Derived from the literature review, four sets of adjectives (humble-luxurious, cool-warm, old-new, and not preferred-preferred) were used as metrics. In Study 2 (N = 41), five sets of fabric color combination swatches were assessed under lighting conditions that were identical to those of Study 1. Three bipolar scales (ordinary-characterful, classic-modern, and soft-rigid), were employed from factor analysis along with three unipolar scales (luxurious, preferred, harmonious with lighting). The results showed that hue characteristics of lighting and cloth types influenced participants' perceptions of the fabric. Overall, white lighting with 4000 K was the most preferred and luxurious lighting across various types of clothes, while a pinkish white with 4700 K (duv = −0.0127) was the best matched in every color combination. In addition, there were interaction effects between lighting colors, clothes types, and fabric color combinations with regard to each of the perceptual qualities. This study provides empirical evidence for optimally match lighting colors with fabric in the presentation of fabric goods.     

煤矿工业场地道路照明接地系统问题探讨

文章简要介绍了煤矿工业场地的特点和低压配电系统接地方式分类,从安全性、经济性的角度分析了TN接地系统和TT接地系统在道路照明回路中的优缺点。通过对比TN-S系统与TT系统的接地故障电流差异、TN-S接地系统用于道路照明的等电位联结困难程度,总结出煤矿工业场地的道路照明配电系统适宜采用TT接地方式。并且详细阐述了TT接地系统剩余电流动作保护器保护整定方法和灵敏度校验方法,列举了煤矿工业场地道路照明选用TT系统时需要注意的中性线不可重复接地的问题。     

基于矢量平均的信道估计算法

提出一种适用于DS-CDMA无线通信系统的低计算量而性能良好的信道估计算法。在DS-CDMA系统中，当接收信号经过解扩或多用户检测等时域预处理后，可以认为干扰大大减弱、期望信号在处理后的信号中占主要地位。这样，用预处理后信号相关阵的最大特征值对应的特征矢量可以很好地近似期望信号的信道矢量。但是，直接特征分解需要很大的计算量，特征跟踪计算量较低，但瞬态性能较差。本文提出一种基于相关矩阵列矢量平均的信道估计算法，该算法不需要特征分解或跟踪。仿真结果表明：新算法在降低计算量的情况下可以获得同直接特征分解方法几乎相同的性能。     

一个基于相邻像素兼容度的模糊加权平均滤波器

在文献[1]的基础上，提出几个改进的模糊加权平均滤波器。本文的方案不仅同时考虑了相邻像素对中心像素的兼容性以及中心像素对相邻像素的兼容性，而且还考虑到了权系数对局部环境的适应性。实验结果表明，该方法相比文献[1]中的模糊加权平均滤波器以及标准的均值滤波器、中值滤波器在噪声消除与边缘保留方面具有更好的性能。     

美国固体照明技术进展概况

介绍了美国能源部于2002年开始实施的固体照明(SSL)技术的"下一代照明计划".同时对美国SSL技术的研发、生产和使用现状以及召开学术会议的情况做了叙述.     

高阶统计量地震子波估计建模

本文在反射系数序列为非高斯、平稳和统计独立的随机过程,地震子波为非因果、混合相位的假设条件下,分别应用滑动平均(MA)和自回归滑动平均(ARMA)模型对地震记录进行建模,并采用运算代价较小的基于高阶累积量的线性化求解方法——累积量矩阵方程法进行了子波提取和模型适应性的研究。数值模拟结果和实际地震数据处理结果表明:自回归滑动平均(ARMA)模型比滑动平均(MA)模型具有参数节省、模型更为高效的特点;累积量矩阵方程法可以有效地压制加性高斯噪声,但对累积量样本估计的准确性要求较高;如果累积量样本估计的误差和方差适度,结合自回归滑动平均(ARMA)模型描述的累积量矩阵方程法可以高效、准确地估计出地震子波。     

The availability of daylight from tropical skies—a case study of Malaysia

In Malaysia, no long-term daylight data are measured. It was only recently that the need to measure the availability of daylight became urgent when the importance of daylighting in buildings was rediscovered. The hourly daylight availability has been simulated for the Malaysian sky using daylight modelling techniques based on empirical and measured solar irradiation and cloud cover data. This paper presents the techniques involved in producing exterior illuminance data. These data were then compared with measured illuminance at Shah Alam and Bangi, Malaysia. The global illuminance levels are generally high, with values exceeding 80,000 lux at noon during the months when solar irradiation is highest. Even during the months when the ground receives less solar irradiation, the peak illuminance can reach 60,000 lux. Applications and uses of such data are in daylighting design, both for visual and thermal comfort, task illuminance and energy-conscious design of buildings. Recommendations are made at the end of the paper on the various climatic data that are required to be measured for overall daylighting design applications.     

The Effect of the Estimation on Goodness‐of‐Fit Tests in Time Series Models

Abstract. We analyze, by simulation, the finite‐sample properties of goodness‐of‐fit tests based on residual autocorrelation coefficients (simple and partial) obtained using different estimators frequently used in the analysis of autoregressive moving‐average time‐series models. The estimators considered are unconditional least squares, maximum likelihood and conditional least squares. The results suggest that although the tests based on these estimators are asymptotically equivalent for particular models and parameter values, their sampling properties for samples of the size commonly found in economic applications can differ substantially, because of differences in both finite‐sample estimation efficiencies and residual regeneration methods.