Liner services network design and fleet deployment with empty container repositioning

Transportation demand of shipping container fluctuates due to the seasonality of international trade, thus, every 3–6 months, the liner company has to alter its current liner shipping service network, redeploy ships and design cargo routes with the objective of minimizing the total cost. To solve the problem, the paper presents a mixed integer linear program model. The proposed model incorporates several relevant constraints, such as weekly frequency, the transshipment of cargo between two or more service routes, and transport time. Extensive numerical experiments based on realistic date of Asia–Europe–Oceania shipping operations show that the proposed model can solve real-case problems efficiently by CPLEX. The results demonstrate that the model can reduce ship’s capacity consumption and raise ships’ capacity utilization.     

移动边缘计算环境下的动态资源分配策略

在通讯设备爆炸式增长的时代,移动边缘计算作为5G通讯技术的核心技术之一,对其进行合理的资源分配显得尤为重要。移动边缘计算的思想是把云计算中心下沉到基站部署(边缘云),使云计算中心更加靠近用户,以快速解决计算资源分配问题。但是,相对于大型的云计算中心,边缘云的计算资源有限,传统的虚拟机分配方式不足以灵活应对边缘云的计算资源分配问题。为解决此问题,提出一种根据用户综合需求变化的动态计算资源和频谱分配算法(DRFAA),采用"分治"策略,并将资源模拟成"流体"资源进行分配,以寻求较大的吞吐量和较低的传输时延。实验仿真结果显示,动态计算资源和频谱分配算法可以有效地降低用户与边缘云之间的传输时延,也可以提高边缘云的吞吐量。     

TCP稳态流中慢启动序列对吞吐量性能的影响

在计算TCP稳态数据流吞吐量时一般都忽略了由于分组丢失而形成的各个慢启动阶段。在考虑TCP稳态数据流中慢启动序列的情况下,对Padhye的经典TCP稳态数据流模型进行了扩展。通过将Padhye的模型与扩展后的模型作比较,证明了在使用Padhye的模型作为多媒体流量控制模型时忽略超时后慢启动阶段的可行性和正确性。     

不锈钢管子—管板的激光焊接

试验研究了不锈钢的深溶焊接。研究了聚焦光束回转的光具。在工件不动的情况下,焊接管子—管板连接环缝。焊缝质量满足压力容器的要求,焊接效率大大提高。     

贝利阀在氨厂运行情况简介

介绍贝利阀在试车及试生产期间出现的问题及解决办法，指出维护过程中应注意的事项。     

Case Study of an Aerosol Explosion and a Method to Determine Explosion Temperatures

A failure analysis case study is presented for a two-piece aerosol containing tetrafluoroethane, commonly referred to as Refrigerant 134a. A gentleman was preparing to recharge the air conditioning system of an automobile when the bottom exploded off the aerosol container, propelling the body of the aerosol container like a rocket, which hit the man in the eye and blinded him in that eye. The aerosol was never connected to the air conditioner, therefore backpressure from the air conditioner (AC) compressor was ruled out as a cause for the explosion. The objective of the study was to determine why the aerosol exploded. Several recently developed test methods were used, including two types of heat-to-burst tests and a puncture chamber to measure the pressure-versus-temperature behavior of aerosols. More common test methods were also used, such as water bath pressure tests, hydro pressure burst tests, pneumatic pressure burst tests, hardness measurements, weight measurements, metallography, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and an accident scenario recreation. A semi-empirical correlation between the hardness and weights of the container bottoms was used to determine the explosion temperature and/or pressure. This semi-empirical correlation agrees in principle with an analysis of the explosion pressures using finite-element analysis (FEA). The root cause for the explosion was determined to be a lack of strength of the bottom of the two-piece aerosol coupled with heating the aerosol to temperatures significantly above room temperature.     

润滑油型常减压蒸馏装置扩能改造

通过对中国石油大连石化分公司Ⅱ套蒸馏装置扩能改造的设计实践，总结归纳了在老工艺装置上采用立体传质塔盘等新技术、新设备的应用成果。改造后的标定数据表明，改造后装置处理能力可达5．1Mt／a，常、减压系统主要产品质量满足设计要求，装置能耗在386.94—406.60MJ／t，低于设计值。     

水溶液辐射分解产物对金属材料腐蚀的影响

实验研究了水辐射分解作用对高放废物深地质处置容器材料的影响。在高放废物深地质处置库附近的地下水,受辐射线作用后分解出氧、氢和氧化产物(例如H_2O_2等),于是在高放废物容器周围形成一个氧化场,导致高放废物中的某些重要放射性核素(例如U,Np和Tc)易溶于水,并向远域迁移。本实验中的含FeSO_4(0.13 mol/L)水溶液在吸收剂量为0、20、60、180、500kGy的射线作用下,其氧化还原电位(Eh)值由+357mV增至+414 mV;在不同吸收剂量的射线作用下,金属Cu、金属Al、0.357 mv金属Fe和不锈钢(后者是我国拟采用的高放废物包装容器材料),在水溶液中的氧化侵蚀强度,分别比在无辐射情况下的大0.2-6.1倍。     

焦化生产中含硫容器自燃氧化倾向性分析

分析了炼焦化工生产过程中硫的分布和存在形态、硫铁化合物自燃的影响因素,提出了防止储罐、管道等设备自燃事故的安全控制方法.