Formulation of sage essential oil (Salvia officinalis,L.) monoterpenes into chitosan hydrogels and permeation study with GC-MS analysis

This study deals with the formulation of natural drugs into hydrogels. For the first time, compounds from the sage essential oil were formulated into chitosan hydrogels. A sample preparation procedure for hydrophobic volatile analytes present in a hydrophilic water matrix along with an analytical method based on the gas chromatography coupled with the mass spectrometry (GC-MS) was developed and applied for the evaluation of the identity and quantity of essential oil components in the hydrogels and saline samples. The experimental results revealed that the chitosan hydrogels are suitable for the formulation of sage essential oil. The monoterpene release can be effectively controlled by both chitosan and caffeine concentration in the hydrogels. Permeation experiment, based on a hydrogel with the optimized composition [3.5% (w/w) sage essential oil, 2.0% (w/w) caffeine, 2.5% (w/w) chitosan and 0.1% (w/w) Tween-80] in donor compartment, saline solution in acceptor compartment, and semi-permeable cellophane membrane, demonstrated the useful permeation selectivity. Here, (according to lipophilicity) an enhanced permeation of the bicyclic monoterpenes with antiflogistic and antiseptic properties (eucalyptol, camphor and borneol) and, at the same time, suppressed permeation of toxic thujone (not exceeding its permitted applicable concentration) was observed. These properties highlight the pharmaceutical importance of the developed chitosan hydrogel formulating sage essential oil in the dermal applications.     

荧光显示管直丝氧化物阴极有效逸出功的计算

阴极的逸出功是表征阴极发射能力的物理量，求定荧光显示管直丝氧化物阴极有效逸出功时，因其零场发射电流密度难于准确取值，温度无法直接测量，显得困难，须予解决，为此提出了一种计算阴极有产逸出功的办法，对某显示管的发射欠佳和“低温高效”的两种氧化物阴极的有效逸出功进行计算，有效逸出功率是靠测量相关物理量再同计算得出，精度不很高，文中所用办法也不例外，但所得结果能反映阴极发射能力，所需仪器少，是实用方法。     

MPID─TOF质谱的快速时间分辨微弱信号测试系统

把瞬态记录仪Ｂｉｏｍａｔｉｏｎ８ｌ００与微型计算机ＩＢＭ─ｐＣ／ＸＴ联接建成了一个高速数据采集系统，本文介绍了系统的硬件接口设计及软件设计。在超声分子束条件下，把它应用于环氧乙烷（Ｃ＿２Ｈ＿４Ｏ）的多光子电离与离解飞行时间（ＭＰＩＤ─ＴＯＦ）质谱的实验研究中，并给出了实验结果；本系统在微观基元化学反应动力学实验研究中广泛适用于对时间分辨微弱信号的探测。     

适用于快速平台测井的多通道核能谱测井仪设计

介绍一种基于快速平台测井要求的多通道核能谱测井仪设计方案。复杂可编程逻辑器件的应用使仪器功能增强，规模减小。该系统可对岩性密度长短源距脉冲信号、自然γ能谱脉冲信号进行多道脉冲幅度分析，并对补偿中子测井信号及井下多路常规模拟信号、脉冲信号进行数字化采集。数据传输采用曼彻斯特编码，传输方式可选择20kB／s半双工(兼容Atlas 3508)或下行20kB／s、上行41．66或93．75kB／s全双工方式(兼容Atlas WTS)，适应挂接到不同测井系统的需要。     

将紫外光谱用于溴指数测定方法的选择

对未知组成的样品进行紫外光谱扫描 ,根据扫描结果以及各种溴指数测定方法的适用范围 ,选择测定未知物溴指数的适宜方法 ,以提高测定准确度。     

Determination of the uranium enrichment with the NaIGEM code

The traditional method used to non-destructively determine the uranium enrichment with an NaI detector is based on the “enrichment meter principle” (Progress report LA-4605-MS, Los Alamos National Laboratory, NNM, 1970, p. 19), which involves measuring the intensity of the 186 keV line of ²³⁵U by selecting two regions of interest for the peak and the background. This type of method suffers from several limitations, the most limiting of which are the impossibility to make wall thickness correction or to take the inference of foreign radioisotopes into account. The NaIGEM software (A guide for using NaIGEM code, version 1.5 for DOS and Windows, 2001; Nucl. Instr. and Meth. A 458 (2001) 196) was developed to overcome these limitations by calculating the 186 keV line intensity with a fitting procedure. The code was tested in different measurement conditions on the wide variety of certified samples, in particular, on reprocessed uranium and on depleted material with thick steel filters interposed between the source and the detector. The results are presented to illustrate the performance and limitations of the tested version (A guide for using NaIGEM code, version 1.5 for DOS and Windows, 2001). The general performance is good except in the case of low-enriched uranium in thick containers.     

磷矿中七种金属元素的光谱法测定

研究了磷矿样品中7种金属元素锰、钴、镍，锌、铬、钼及铋的分析方法，选择了灵敏度高干扰少的谱线，绘制出工作曲线，对样品进行了科学处理，不必进行化学分离即可对七种元素同时测定，经合成样分析、回收实验及样品测定，证明此方法精确可靠，其回收率在98％-102％之间。     

飞行时间二次离子质谱--强有力的表面、界面和薄膜分析手段

二次离子质谱（Secondary ion mass spectrometry，简称SIMS）是一种对表面灵敏的质谱技术，建立在表面各种类型带正、负电荷原子或分子发射的基础上。用飞行时间（Time of flight，简称TOF）仪器对这些二次离子进行质量分析，能确保并行质量登录、高质量范围、高流通率下的高分辨和精确质量测定这些优异性能。配合细聚焦扫描一次离子束，可在优于1nm的高深度分辨和优于50nm的横向分辨本领下，实现对表面优于单层ppm(百万分之一）量级的极高检测灵敏度。当今TOF－SIMS已发展为一种成熟且完善的表面分析技术。极高的灵敏度，再加上即使对大分子及不易挥发性分子都独具的敏感性，使它成为很多高技术领域不可缺少的分析手段，这些领域包括微电子学、化学和材料科学以至纳米技术和生命科学等。本文简述了TOF－SIMS的原理、仪器及其多方面的应用和展望。     

Structural Description of Polyaromatic Nucleus in Residue

The proton nuclear magnetic resonance spectroscopy （1H-NMR）, the synchronous fluorescence spectrometry （SFS） and the ruthenium ions catalyzed oxidation （RICO） method were used to determine the chemical structure of polyaromatic nucleus in Oman residue fractions. The results of 1H-NMR analyses showed that the average numbers of aromatic rings in the aromatics, resins and asphaltenes units were 3.2, 5.6 and 8.2, respectively. SFS was used to investigate the distribution of aromatic rings in residue fractions, the main distribution range of aromatic rings in aromatics, resins and asphaltenes were 3 4 rings, 3--5 rings and more than 5 rings, respectively. The aromatic network in residue fractions was oxidized to produce numerous carboxylic acids. The types and content of benzenepolycarboxylic acids, such as phthalic acid, benzenetricarboxylic acids, benzenetetracarboxylic acids, benzenepentacarboxylic acid and benzenehexacarboxylic acid disclosed the condensed types of aromatic nuclei in the core. The biphenyl fraction （BIPH）, the cata-condensed fraction （CATA）, the peri-condensed fraction （PERI） and the condensed index （BCI） were calculated based on the benzenepolycarboxylic acids formed. The results implied that there was less biphenyl type structures in all residue fractions. The aromatics fraction was almost composed of the cata-condensed type system, and the asphaltenes fraction was wholly composed of the peri-condensed type system, while in the resins fraction co-existed the two types, herein the peri-con- densed type was predominant over the cata-condensed type. Based on the analytical results obtained in the study, the components --aromatics, resins and asphaltenes -- were given the likely structural models.     

新型涂料增稠剂的化学成分鉴定

本文用红外光谱法对一种新型涂料增稠剂进行了化学成分鉴定,其主要成分为羟丙基甲基纤维素与蒙脱土。