尿素装置液位仪表失真分析及处理

介绍了尿素装置中3起液位仪表失真案例,分析了故障现象和设备工况,确定失真原因,采取了相应的处理措施,解决了仪表故障。     

含氮金刚石结构中Jahn-Teller畸变效应的计算

研究了由J.Bourgoin和M.Lannoo提出的半导体内Jahn-Teller畸变效应的计算理论。应用Bourgoin和Lannoo的方法研究了含中心氮杂质金刚石结构的Jahn-Teller畸变问题,计算了34C+N簇团的T2模耦合沿%111&晶向的Jahn-Teller畸变效应,结果与实验相符。     

IP网络信源信道联合编码策略

面向IP网络,讨论了一种信源编码的失真估计模型,并用典型的视频编码器作了验证.提出了一种基于包的信道编码方法,并将该方法引入信道编码的失真估计中,对一种信道编码的失真估计模型作了改进.以前述内容为基础,提出了两种信源信道联合编码策略,实验结果表明,这两种策略得到的最优结果在很大程度上提高了视频重建质量.     

X射线光刻掩模背面刻蚀过程中的形变仿真

开发了理论模型以验证有限元方法用于X射线光刻掩模刻蚀过程数值仿真的正确性。利用相同的有限元技术，对X射线光刻掩模的背面开窗、Si片刻蚀过程进行数值仿真。结果表明，图形区域的最大平面内形变(IPD)出现在上、下边缘处，最大非平面形变(OPD)出现在左、右边缘处。此外对Si片单载荷步刻蚀和多载荷步刻蚀的仿真进行比较，结果表明图形区域最终的形变量与Si片刻蚀的过程无关。     

基于放大器非线性拟合的自适应预失真技术

本文提出了一种新的有效的大功率放大器非线性失真的数字自适应预失真设计方法。该方法基于有理双线函数的非线性及其逆变换易于求解的特性，设计大功率放大器的估计器以逼近大功率放大器的非线性特性，预失真器的非线性参数由估计器的逼近函数逐段取逆变换来调节，以达到预失真补偿的目的。计算机仿真结果表明：该方法用于正交频分复用（OFDM）系统中具有收敛速度快、系统性能稳定、补偿效果好等特点。     

Process issues in treatment: Application to sexual offender programs.

How critical is the therapeutic alliance in the treatment of sexual offenders? To date such process issues have been neglected in the field of sex offender treatment. This article reviews the literature on the influence on behavior change of therapist features, clients' perceptions, and the therapeutic alliance. Among the many therapist features identified as helpful are empathy, warmth, and being directive and rewarding. Therapists who are aggressively confrontational appear not to foster beneficial changes in their clients. These issues are directly related to treatment issues faced by therapists who work with sexual offenders, such as dealing with cognitive distortions, lack of empathy, and lack of motivation to change. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A prospective investigation of the impact of childhood sexual abuse on the development of sexuality.

The sexual attitudes and activities of 77 sexually abused and 89 comparison women (mean age=20.41, SD=3.38) were assessed 10 years after disclosure in a longitudinal, prospective study of the long-term effects of childhood sexual abuse. Abused participants were more preoccupied with sex, younger at first voluntary intercourse, more likely to have been teen mothers, and endorsed lower birth control efficacy than comparison participants. When psychological functioning earlier in development was examined, sexual preoccupation was predicted by anxiety, sexual aversion was predicted by childhood sexual behavior problems, and sexual ambivalence (simultaneous sexual preoccupation and sexual aversion) was predicted by pathological dissociation. Findings also indicate that biological father abuse may be associated with greater sexual aversion and sexual ambivalence. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

Prediction of processing-induced distortion of curved flanged composite laminates

It is well known that angles in composite parts contract as they are cooled down from the curing temperature, this is often referred to as spring-in. It is caused mainly by the significantly different thermal contractions and cure shrinkage's experienced between the fibre direction and the through-thickness direction during the manufacturing process. A number of works have reported on the spring-in of straight angle composite parts. However, little has been done to investigate the distortion of curved flanged composite parts, which will distort differently owing to the introduction of the additional curvature, thus constraint.

In the present work, the distortion of the circularly curved flanged laminates is studied numerically. The finite element method is used to predict the processing-induced distortion of the part with two different approaches. In the first approach, the shear angles of the composite plies are predicted by a draping analysis. The effect of the fibre shearing on the mechanical properties of the laminates is considered in the model used to predict the distortion. The second simplified approach assumes that the in-plane properties of the laminates are isotropic. The results obtained by these two approaches are compared with those obtained experimentally.     

几何位相非线性变化的实验研究

本文报道了Pancharatnam位相非线性变化的实验研究，实验结果与理论预言符合得很好。Pancharatnam位相的这种非线性可能在光开关中得到应用。