AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

几何位相非线性变化的实验研究

本文报道了Pancharatnam位相非线性变化的实验研究，实验结果与理论预言符合得很好。Pancharatnam位相的这种非线性可能在光开关中得到应用。     

两种求解可靠指标的实用算法

介绍了基于几何原理求解可靠指标、寻找设计验算点的具有较高实用价值的两种新算法： 图解渐近法和Monte Carlo递进法。推导了由标准正态变量反算常用分布类型的随机变量数值的计算公式，并且通过采取某些改善措施，简化了计算过程，大大提高了问题的求解效率。同时，两种算法可以结合使用，经算例验证，能够快速解决问题且满足高精度要求，说明了本文方法的可行性和有效性。     

模糊自动机在电磁波识别中的应用

研制了一个模糊处理和神经网络相结合的自动机,使用模糊技术从未处理的电磁信号波纹图像中处理模糊几何特征属性,进行波纹分类与识别。当使用模糊自动机(FA)进行识别紊乱波纹时,这些模糊几何特征是最好的。而对这些模糊几何特征的辨识,使用FA是很好的。     

Exploiting partial or complete geometrical symmetry in 3D symmetric Galerkin indirect BEM formulations

Procedures based on group representation theory, allowing the exploitation of geometrical symmetry in symmetric Galerkin BEM formulations, are investigated. In particular, this investigation is based on the weaker assumption of partial geometrical symmetry, where the boundary has two disconnected components, one of which is symmetric; e.g. this can be very useful for defect identification problems. The main development is expounded in the context of 3D Neumann elastostatic problems, considered as model problems; and then extended to SGBIE formulations for Dirichlet and/or scalar problems. Both Abelian and non‐Abelian finite symmetry groups are considered. The effectiveness of the present approach is demonstrated through numerical examples, where both partial and complete symmetry are considered, in connection with both Abelian and non‐Abelian symmetry groups. Copyright © 2003 John Wiley & Sons, Ltd.     

以数字搜索树表示的二值图象的几何变换

本文介绍以数字搜索树表示的二值图象的一种几何变换算法，文中讨论了四分区与正四边区的基本关系，输出ＤＳＴ结点成立的充分条件，给出了完整的几何变换算法并对算法的复杂性作了分析。     

C-V模型与工业CT相结合的几何测量方法

针对工业生产中复杂封闭内腔几何尺寸很难测量的问题,提出一种基于C-V模型的工业CT几何测量方法.首先利用C-V模型提取目标边缘坐标点的有序链码,然后利用Green定理和欧氏距离公式计算目标区域的面积和周长.在提取目标边缘坐标点的步骤中,把边缘灰度先验知识融入C-V模型以提高测量精度;在计算目标区域的面积和周长的过程中,合理地选择目标边缘有序坐标点和插值有序坐标点,再一次提高几何测量精度.实验结果表明,与2DFacet模型测量方法相比,文中方法测量精度约提高1个数量级;并已将该方法应用于实际中.     

GM模型的几何性质及统计检验

以空间向量几何理论为基础，详细地分析了Ｇａｕｓｓ－Ｍａｒｋｏｖ线性模型的几何性质；在实现了模型图形化描述的基础上，利用各解向量的几何及统计性质构造出了不同情形下的统计检验方法和相应的检验统计量，为全面、深入地研究和灵活运用该模型提出了一种简洁直观的数学方法     

无模多点成形中三维曲面工件的展开方法

本文从几何映射的角度出发 ,以面积不变为基本的展开原则 ,提出了适合于板材无模多点成形工艺的自由曲面展开的计算方法———三角形曲面片展开法和约束加权整体展开法 ,并用VC ++编制了相应的计算机程序。文中以鞍形样件和高速列车车头蒙皮的部分工件为例 ,进行了实际验算。     

不定积分中的几何背景和表格分部积分法

论述了数学背景对数学发展的重要性,提供了不定积分中的几何背景,介绍了不定积分的表格分部积分法及案例,对改革教学内容和改进教学方法进行了尝试。