微型灌注桩托换技术在地基基础加固工程中的应用

因场地淤泥等软土层深厚,在填方荷载作用下,软弱土层产生固结沉降,引起局部构筑物的不均匀沉降,发生结构破坏。采用微型灌注桩加固满足现场各个限制条件的要求,达到了加固目的。     

Chemical Interactions in Diboride-Reinforced Oxide-Matrix Composites

Thermochemical analyses of interfacial reactions in titanium, zirconium, and hafnium diboride reinforced oxidematrix composites have been carried out to evaluate the chemical compatibility. The chemical reactivity of these diborides with oxygen and the high volatility of B₂O₃( l ) at reduced oxygen pressures are concerns during processing and operating conditions. The thermochemical stability and the vaporization behavior of B₂O₃( l ) are discussed in terms of partial pressures of dominant gaseous species of the boron-oxygen system at 1700 and 2300 K. The TiB₂/ZrO₂ and TiB₂/HfO₂ systems are thermodynamically stable in a limited oxygen pressure range. The TiB₂/Al₂O₃ system is stable, but the reactions in this system may apparently be accompanied by formation of gaseous products (B₂O₃, AlO, Al₂O, and lower boron oxides) in the presence of elemental oxygen. These thermochemical considerations are very useful in evaluating the effectiveness of oxides as diffusion barrier coatings on diboride reinforcements.     

Role of Specimen Geometry in the Effect of Fiber Orientation on the Thermal Conductivity of a Uniaxial Carbon-Fiber-Reinforced Aluminoborosilicate Glass-Matrix Composite

A study concerning the effect of fiber orientation on the thermal conductivity of a uniaxial carbon-fiber-reinforced borosilicate glass was conducted. For thin specimens, and thick specimens with specimen sides cut parallel to the fiber direction, the dependence of thermal conductivity on fiber orientation showed excellent agreement with theoretical behavior predicted for a composite infinite in extent. In contrast, the thermal conductivity data for rectangular thick specimens fell well below the data for the thin and angled specimens. For fiber orientation of 45° and higher, at which the heat was directed toward the side of the specimen rather than across, the thermal conductivity values showed excellent agreement with theoretical behavior predicted for a finite composite strip with insulated sides.     

Thermodynamic state of reinforced interpenetrating polymer networks

The free energies of mixing of two networks in the interpenetrating polymer network based on crosslinked polyurethane and poly(ester acrylate) have been determined by the vapour sorption method. It was established that the constituent networks in the IPN are not miscible. The introduction of fillers of different chemical nature increases the compatibility. The thermodynamic affinity of the fillers to the individual networks and IPN was estimated. It was established that when the free energy of interaction of one or both components of the IPN with the filler is negative, reinforcement leads to the formation of a compatible and equilibrium system. For fillers having no affinity to the polymers, compatibilization is observed, which is connected with slowing down of phase separation in the system in the presence of filler.     

Influence of pencil lead hardness on voltammetric response of graphite reinforcement carbon electrodes

This work studied the voltammetric response of graphite reinforcement electrodes made of different pencil lead hardness. The studies showed that harder graphite leads, regardless of their manufacturer, are more appropriate as electrode material for voltammetric purposes due to their higher peak currents, increasing sensitivity and reproducibility, with ΔEp closer to the theoretical value for a reversible system.     

Water and salt permeability of reinforcement polymer‐gel composite membrane

The charged mosaic polymer membrane (CMM) without reinforcement and the composite charged mosaic polymer membrane (CCMM) with reinforcement were investigated in terms of salt and water transport (permeability). The composite charged mosaic polymer membrane (CCMM) with reinforcement showed a unique transport behavior such as preferential material transport L_p and ω. Water permeability coefficient, L_p and salt permeability coefficient, ω were estimated by taking account of active layer thickness of composite polymer gel. The L_p and ω values of CCMM with reinforcement were larger than those of CMM without reinforcement. On the other hand, the reflection coefficient of CCMM, σ, showed negative value, which suggested preferential material transport to solvent transport. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

纤维表面处理对植物纤维增强水泥的物理力学性能影响

植物纤维增强水泥的力学性能具有湿敏感性，随湿度增加弯曲强度下降幅度较大。本文工作采用的几种浸渍处理纤维表面的方法，有效地改善了这种状况，其中一种经处理的纤维增强水泥较没有处理的对比试样在饱水状态下的弯曲强度提高了67％，气干状态提高了18％，缩小了二者间的差距。     

综合防渗技术在黄岗水库防渗加固工程中的应用

水库大坝综合防渗加固技术具有投资省、防渗墙体连接均匀完整可靠、防渗效果好、施工速度快等特点.通过黄岗水库的实践,为该项技术的推广提供了一个典型实例工程.     

带平衡约束矩形布局优化问题的深度强化学习算法

带平衡约束的矩形布局问题源于卫星舱设备布局设计,属于组合优化问题。深度强化学习利用奖赏机制,通过数据训练实现高性能决策优化。针对布局优化问题,提出一种基于深度强化学习的新算法DAR及其扩展算法IDAR。DAR用指针网络输出定位顺序,再利用定位机制给出布局结果,算法的时间复杂度是O（n³）;IDAR算法在DAR的基础上引入迭代机制,算法时间复杂度是O（n⁴）,但能给出更好的结果。测试表明DAR算法具有较好的学习能力,用小型布局问题进行求解训练所获得的模型,能有效应用在大型问题上。在两个大规模典型算例的对照实验中,提出算法分别超出和接近目前最优解,具有时间和质量上的优势。     

玻璃钢筋混凝土的有限元计算与试验

钢筋混凝土广泛应用于土木工程领域，但其结构耐久性因钢筋本身的锈蚀成为现今急待解决的问题。人们一直在寻找对钢筋混凝土进行改良的途径，用玻璃钢筋代替普通钢筋是解决这一问题的一个有效的方法，为此进行了试验和ANSYS有限元分析，结果证明此法具有可行性。