Iterative equalization combining algorithm in intersymbol interference channel

To realize joint optimization of spatial diversity and equalization combining in the intersymbol interference (ISI) channel, an iterative equalization combining algorithm is proposed. The proposed algorithm uses the coefficients of Turbo equalization to calculate the combination weights without estimating the signal to noise ratio in each diversity branch. The equalized symbols from different diversity branches are combined, and the extrinsic information output from the decoder is fed back to the equalizers, so as to exchange soft information between the equalizers and the decoder. The performance of the proposed algorithm is analyzed using the extrinsic information transfer (EXIT) chart and verified by simulations. Results show that our approach fully exploits time domain information from the multipath channel and spatial domain information from multi receiving antennas, which efficiently improve the performance of the receiver in the severe ISI channel.     

色散补偿及EDFA增益均衡的一体化

提出一种新的色散补偿及EDFA增益均衡的一体化方法。在10Gb／s的光通信系统和600km G652光纤中首次实现了基于16个碉啾光纤布拉格光栅(FBG)的色散补偿及掺饵光纤放大器(EDFA)的增益均衡。16个FBG的波长间隔为1．6nm，波长覆盖C波段1529～1556nm约27nm的范围。经600km G652光纤传输后，10Gb／s的NRZ码传输功率代价小于2dB。     

16×10.7 Gb/s 1 600 km普通单模光纤环路传输研究

利用双折射光纤环设计了可调功率均衡滤波器,实现了16路16×10.7 Gb/s NRZ码、超过1 600 km常规单模光纤(SMF)的系统传输及性能测试,信道误码率均小于3×10-5(FEC纠错前).数值仿真并实验研究了对单环长度240 km、损耗超过80 dB的环路16路10.7 Gb/s波分复用(WDM)系统传输的优化.传输7圈后,功率均衡器降低了信道功率不平坦度超过5 dBm.     

心电图信号的频域分析

提出了一种简便有效的、由心电图（ECG）曲线提取QRS-T复合波的新方法，从而获得P波（当房颤未发生时）或f波（当房颤时）；利用功率谱、自相关、互相关等信号处理技术，对它进行了处理和分析，特别是，比较了未房颤时和发生房颤时的相关信息的显著差别。     

可焊性高强度钢筋的开发与生产

为进一步开发国际钢材市场，研制开发了符合加拿大可焊性高强度钢筋标准要求的高强度钢筋．制定了化学成分及力学性能内控标准，分析了生产工艺各环节对成分和性能的影响，依据试验结果，在全面统计分析的基础上，调整了冶炼成分，生产的531批钢筋全部合格．通过直方图及回归分析，说明了制定的产品生产工艺可行，也为今后的生产提供了理论依据。     

Wavelet packet based channel equalization

Recently, considerable amount of attention is being given to the field of wavelets and wavelet packets. It has found numerous applications in signal representation, image compression and applied mathematics. In this paper, we present a channel equalization method based on wavelet packets. The proposed equalizer structure is based on the fact that for sufficiently narrowband sequences, a non-ideal channel can be modelled as an attenuation and delay. If the data sequence is used to modulate a set of narrowband wavelet packets, then no equalization is required at the receiver end. The equalization problem reduces to that of determining the delay introduced by the channel for each of the wavelet packets. A minimum square variance algorithm for adaptively choosing the delay has been proposed. This algorithm has been shown to perform as desired analytically in a simple delay channel case. Simulations have been used to study its performance in the non-ideal channel’s case and the results corroborate theoretical predictions.     

Probabilistic linear models for multiresolution estimation in gray-level images

A multiresolution analysis of digital gray-level images is presented. A gray-level multi-scale framework is determined from two main assumptions: the gray scale is binary at the finest spatial resolution, and the gray levels of composed regions are obtained additively. In order to interrelate the gray-level histograms of the same image at different resolutions, probabilistic linear models are developed, which are then applied for estimation. Linear-optimization theory is used as a way of constructing such models. A general procedure for image processing is sketched, based on gray-level estimation. A versatile algorithm for nonlinear filtering is derived. Some examples of prospective applications are given.This work was partially supported by grant TIC91-646 from the DGYCIT of the Spanish Government.     

Hebbian无导师学习原理的盲均衡：（Ⅱ）非最小相位通道

本文介绍了根据信号码的相互独立性，利用噪声情况下盲信号分离的原理，实现非最小相位通道特性的盲均衡。     

MIMO系统的自适应均衡技术研究

研究了用于MIMO系统的自适应均衡的几种算法，比较了最小均方算法(LMS)、递归最小二乘算法(RLS)、判决反馈算法(DFE)、格型梯度自适应均衡算法(GALE)和格型最小二乘自适应均衡算法(LSALE)。文章的最后给出了仿真结果及结论。     

桥口南--徐集地区三维地震资料连片处理技术

针对东濮桥口南—徐集地区三维地震资料的特点及本区块的地质要求，制定处理流程，应用能量均衡、面元均化、三维道内插、三维DMO叠加及三维一步法偏移等技术方法，研究解决因为不同年代、不同方法、不同参数所采集的地震数据在连片处理时存在的问题，精细处理三维连片资料，满足构造解释精度的要求，对进一步落实该区构造和增储上产具有重要的作用。