M1080B无心外圆磨床改进

M1080B无心外圆磨床砂轮及导轮宽度较窄,磨削轴承套圈外圆时,磨削效率低,托板架调整较为繁琐、皮带打滑、磨损较为严重。针对上述问题,提出了相应的解决办法,提高了磨削效率。     

有限缓冲区FMS的特征分析与托盘配置

本文研究了Ｊｏｂ－Ｓｈｏｐ型有限缓冲区ＦＭＳ的运行特性及托盘优化配置问题，给出了系统的分析模型及托盘优化算法。本文的结果对系统的分析与设计具有重要的实际意义。     

Study on axiomatic rules for building up relationships between requirement and source programs

The purpose of our study is to build up relationships between requirement and source programs with our originally thought-out rules. When other rules to be derived from these original rules are applied to software development, even a single instruction in a programming language could be determined, and the program would satisfy the requirement. More specifically speaking, these rules will turn into a formula or a prototype of software programs. Hence, when the variables in the requirement are placed in the formula, we can get a required program in an automatic way.     

柔性制造系统的托盘优化

本文讨论Job-shop型柔性制造系统的托盘优化问题,给出了求最小托盘数的算法,把托 盘优化问题化成了求解线性整数规划问题.     

木材工业企业物流装备概况

概述了木材工业企业各种物流设备及其应用情况,分别介绍了带式运输机等连续运输机械、手动液压搬运车等间歇动作装卸运输机械、气力输送以及托盘的应用情况。     

强韧包装纸板用落叶松半化学浆的研究

主要研究一种可以替代传统硫酸盐化学木浆，来生产强韧包装纸板或瓦楞纸箱箱板纸的落叶松碱性亚硫酸盐－蒽醌半化学浆。这种采用碱性亚硫酸盐添加蒽醌助剂的制浆方法研制的落叶松半化学浆，当纸浆得率为５６．９％时，在低打浆度情况下纸浆强度性能可以达到我国２号未漂硫酸盐化学木浆的标准，而且有可能达到１号未漂硫酸盐化学木浆的标准，纸浆得率比落叶松硫酸盐木浆得率实际指标（４３％）绝对值提高１３％以上。用于制作强韧包装纸板或瓦楞纸箱箱板纸的落叶松碱性亚硫酸盐－蒽醌半化学浆，蒸煮终点宜于控制在得率约６２％、卡伯值１００左右。     

自润滑料垫的设计及其在立推式铝锭加热炉上的应用

本文详细论述了我公司自主开发的自润滑料垫的结构设计和技术特点，分析了这种料垫的优缺点，对其应用前景进行了展望。     

小径落叶松材制作空间网架杆件的选择与设计

通过对小径落叶松材的力学性能、与金属套筒连接性能及胶粘剂的选择试验,设计用小径落叶松材制作空间网架,扩大了小径材在建筑领域的使用范围。     

落叶松锯材抗弯强度尺寸效应

以兴安落叶松锯材为研究对象,研究了不同目测等级下锯材尺寸与其抗弯强度之间的关系。试验选取1961根6.5、9.0和14.0cm 3种宽度尺寸的目测等级锯材,每个宽度尺寸分为高、低目测等级组,按照每组试件宽度18倍的测试跨度测试锯材的抗弯强度。利用斜率法和形状参数法确定高、低目测等级组抗弯强度5%分位值的长度与宽度的组合尺寸效应。研究结果表明,斜率法获得高、低目测等级组试件抗弯强度5%分位值的组合尺寸效应分别为0.19和0.23。     

Effects of Heat Treatment on Dimension Stability of Larch Pallet Decks

The useful life of wooden pallets is lower because of the defects in lumbers. The quality of lumber can be significantly enhanced by heat treatment. In this paper, the larch pallet decks samples were heat-treated under the conditions of different time and temperatures. The quantity of water uptake has reduced 16.8％ under the condition of 250 ℃ for 150 min. The resistance of water absorption efficiency increases 165.34％ under the condition of 175 ℃ for 90 min. The anti-shrink efficiency increases 72.08％ under the condition of 250 ℃ for 90min. The results showed that the dimension stability of larch panels can be improved by heat treatment. The condition of 250 ℃ for 180 min is the best heat treating condition to improve the dimension stability.