DETERMINATION OF TOTAL NITROGEN IN BARLEY AND MALT BY COMBUSTION METHOD—COLLABORATIVE TRIAL

A combustion method, relying on the Dumas principle, for the determination of total nitrogen in barley and malt, has been collaboratively tested by the Analysis Committee of the European Brewery Convention. Repeatability, r₉₅, and reproducibility, R₉₅, values were 0.063 and 0.116% of dry matter, respectively, for samples with nitrogen contents in the range 1.23 to 1.86% N of dry matter. There was no significant difference between these values for barley and malt. The Analysis Committee approved the adoption of the combustion method for inclusion in Analytica EBC as an alternative method.     

THE LAURENCE BISHOP SILVER MEDAL INAUGURAL LECTURE THE IMPACT OF SCIENTIFIC MEASUREMENT ON THE BREWING PROCESS

Laurence Bishop's contribution to the brewing industry over more than 50 years of research endeavour and committee activities is reviewed. Three research areas — prediction of extract, the effect of turbidity on yeast activity during fermentation and the development of a 3-vessel fermentation system — are used to highlight his achievements. Five topics with which the author was intimately involved, three of which were connected with Laurence Bishop's own researches, are used to describe the author's activities. These concerned the assessment of beer foam, the prediction of beer stability, the assessment of the bittering value of hops, time course changes in the analytical characteristic of an ale fermentation and the use of fractional factorial designs to facilitate experimental programmes.     

Mashing of rice with barley malt under non-conventional process conditions for use in food processes

Non-conventional mashing conditions are relevant in the development of a lactic acid-fermented soymilk beverage where mashed rice is the source of carbohydrates for the fermentation and sweetness of the beverage. Advantages in the process layout could be achieved by mashing at higher pH and lower malt concentrations than normally used in the brewing industry. the work reported here assessed the consequences of mashing under non-conventional conditions. Malt concentration in the cereal part was varied from 25% to 70% (w/w), pH was varied within 5.3 to 7.1, and prolongation of the holding times at 50°C and 62°C was investigated. Regression equations have been established for predicting yields of soluble protein, low molecular weight sugars and total fermentability as functions of pH and malt concentration. the results showed that the maltose yield was constant while glucose, maltotriose and total fermentable sugar yields decreased slightly with increasing pH and decreasing malt concentration. Prolonged mash holding times at 50°C and 62°C gave minor increases in protein yields only. It is concluded that it is quite acceptable to use non-conventional mashing conditions when a mashing step is integrated in other food processes.     

Effect of precooking time and drying temperature on the physico-chemical characteristics and in-vitro carbohydrate digestibility of taro flour

Achu is a thick porridge obtained by cooking and pounding taro (Colocasia esculenta) corms and cormels in a mortar. This study was undertaken with the objective of producing precooked taro flour that can be used in the preparation of achu. Taro slices were precooked to times of 0, 20, 45 and 90 min and dried in an air convection oven at varying temperatures of 50, 60, 70 or 80 °C before milling into flour which was then analysed for its water absorption capacity (WAC), water solubility index, emulsion activity and stability, bulk density, foam capacity and least gelation concentration (LGC). Achu made from the flours were equally analysed for their relative penetrometric index, bulk density and colour. The results showed that precooking induced significant (P<0.05) decrease in foam capacity, penetrometric index, and increase in LGC, emulsion stability and WAC. The drying temperature also induces significant reduction in emulsion capacity and stability, penetrometric index, and increase in LGC, WAC. Long precooking time (>45 min) and drying temperature (>60 °C) induced significant reduction of the in-vitro carbohydrate digestibility of taro achu.     

Emulsifying Capacity and Emulsion Stability of Soy Proteins Compared with Corn Germ Protein Flour

Both emulsifying capacity (EC) and emulsion stability (ES) increased with increasing concentrations from 0.4% to 0.8% of soy flour (SF), soy concentrate (SC), soy isolate (SI) and corn germ protein flour (CGPF) when studied by response surface methodology. EC and ES increased as pH increased from 6 to 8 in all samples. Increasing incubation temperatures of protein solutions from 20–70°C or from 4–20°C did not affect EC or ES, respectively. SF had the highest EC, followd by SI, SC, and CGPF.     

Effect of olive residue benzylation on the thermal and mechanical properties of poly(vinyl chloride)/olive residue composites

The changes in mechanical properties, the thermal stability, and the water absorption capacity of poly (vinyl chloride)/olive residue flour composites were studied as a function of various residue olive flour ratios, i.e., 0, 5, 15, and 25% by weight taking into account the effect of benzylation chemical treatment of the filler. The study showed that composite samples prepared with the untreated filler exhibited higher tensile modulus and hardness compared with the neat resin, whereas elongation and tensile strength were observed to decline. On the other hand, the PVC hardness was found to increase with addition of the untreated olive residue flour (ORF), however the composite samples prepared with the benzylated flour exhibited lower hardness than those prepared with untreated olive residue. Moreover, the amount of absorbed water depends on the amount of filler in the composite. The comparison of the results obtained from the samples of F5, F20, and F30 formulations between the untreated and treated ORF indicated a reduction in absorbed water for the composite samples containing treated ORF with benzyl chloride. As a result, the mechanical properties of the treated composites were improved. Furthermore, the thermal characterization of the different samples carried out by color change test and thermogravimetric analysis revealed an increase in the onset temperatures of decomposition for the treated composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

关于影响面条食用品质相关因素的探讨

从小麦生产概况、面条发展历史和工艺、国内外对面条食用品质的研究3个方面,分析了我国面条工业发展缓慢的原因,提出了小麦育种-面粉工业-制面工业,3个环节紧密配合,协调发展,才能形成良性循环的新思路。     

APPLICATION OF A COMMERCIAL ENZYME PREPARATION IN THE BARLEY MALTING PROCESS

This paper presents data on barley micromalting with addition of the CELLUCLAST enzyme complex. This is a commercial, multicarbohydrase with distinct β-glucanase and proteinase activities. The enzyme was added to steeping and germination phases, in different quantities (0.05%; 0.75% and 0.1% of initial barley). The enzyme was added to different malting phases: to the 2nd and 3rd steep water, at the beginning of germination on the 1st day by spraying, on the 2nd day of germination and in combination of addition to 3rd steeping water and in germination start (50% of total quantity of each). CELLUCLAST enzyme had a significant effect on reduction of wort viscosity, extract difference, wort filterability and protein breakdown, depending on the quantity of added enzyme and the malting phase to which it was added. There was no negative effect on other malt quality parameters. The best values of cytolytic breakdown parameters (viscosity, extract difference, filtration rate) were obtained with addition of 0.075% of CELLUCLAST, on the first day of germination.     

MALTING AND BREWING SCIENCE: CHALLENGES AND OPPORTUNITIES*,†

Molecular technologies have been developed for the transformation of barley. These technologies complement current methods of barley breeding. In addition, they offer the potential of altering specific components in barley that affect malting quality and of introducing foreign genes, controlling desirable traits, into barley. Application of genetic engineering to improving malt quality factors such as cell wall degradation, protein modification, starch hydrolysis and flavour stability, is discussed. Limitations to the use of this technology for improving malt-related functional properties of barley components such as cell walls and starch granules are also evaluated. Some possible constraints to the utilization of genetic engineering for malt quality improvements are identified.     

EVALUATION OF BARLEY AND MALT QUALITY USING NEAR-INFRARED REFLECTANCE TECHNIQUES

A scanning near-infrared reflectance spectrophotometer was calibrated for the prediction of barley aleurone colour and malt moisture. The malt moisture was predicted on malt ground for the determination of malt extract (coarse grind) making the method suitable for moisture correction in malt extract estimation. Calibrations for the prediction of malt extract and endosperm modification from barley and malt were also attempted. A correlation (r= 0.851 n = 135) was found between malt hot water extract and the percentage of the endosperm estimated as being modified by microscopy following staining with Calcofluor. Probably because of this influence of modification on malt extract, the use of near-infrared reflectance to predict malt extract was most successful at predicting the malt extract values obtained following micro-malting in the absence of the additives, gibberellic acid and potassium bromate.