A simulation study of reduction kinetics for sponge iron production in a rotary hearth furnace

ABSTRACT

A mathematical model has been developed by coupling genetic algorithm (GA) with heat and material balance equations to estimate rate parameters and solid-phase evolution related to the reduction of iron ore-coal composite pellets in a multi-layer bed Rotary hearth Furnace (RHF). The present process involves treating iron ore-coal composite pellets in a crucible over the hearth in RHF. The various solid phases evolved at the end of the process are estimated experimentally, and are used in conjunction with the model to estimate rate parameters. The predicted apparent activation energy for the wustite reduction step is found to be lower than those of the reduction of higher oxides. The thermal efficiency is found to decrease significantly with an increase in the carbon content of the pellet. Thermal efficiency was also found to increase mildly up to three layers. Multilayer bed remains as a potential design parameter to increase thermal efficiency.     

人纤维蛋白原对急诊外伤致创伤性凝血病疗效及相关因素分析

目的:探讨人纤维蛋白原(fibrinogen，FIB)对急诊创伤性凝血病患者的临床疗效及相关因素。方法:将2015年6月至2018年6月本院收治的100例严重创伤患者纳入本研究，根据是否创伤性凝血病分为凝血病组(80例)和非凝血病组(20例)。比较凝血病组和非凝血病组患者收住后第1个24 h的急性生理和慢性健康评分(acute physiology and chronic health evaluation II，APACHE II)、创伤严重程度评分(injury severity score，ISS)、低体温及低灌注发生率等指标。采用Logistic多因素回归方法分析严重创伤患者发生创伤性凝血病的相关因素。将80例创伤性凝血病患者随机分为观察组(40例)和对照组(40例)。对照组按照常规诊疗措施治疗，观察组在对照组处理基础上给予人FIB，比较治疗前后观察组和对照组的凝血功能指标，及治疗后的临床用血量、住院时间及病死率。结果:与治疗前相比，治疗后观察组和对照组的凝血酶原时间(prothrombin time，PT)、活化部分凝血活酶时间(activated partial thromboplastin time，APTT)及D-二聚体水平降低(P<0.05)，FIB水平明显升高(P<0.05)。观察组的红细胞(red blood cell，RBC) 输注量、新鲜冰冻血浆(fresh frozen plasma，FFP)输注量、重症加强护理病房(intensive care unit，ICU)时间及病死率均明显低于对照组，差异具有统计学意义(P<0.05)。创伤性凝血病患者PT>18 s(r=0.623，P=0.024)、APTT>60 s(r=0.722，P=0.018)、凝血酶时间(thrombin time，TT)>15 s(r=0.719，P=0.033)与ISS评分呈正相关。碱缺失(base deficit，BD)≥6(OR=3.678，95%CI=1.065～9.417)、格拉斯哥评分(Glasgow coma scale，GCS)≤8(OR=5.299，95%CI=1.122～8.711)和血小板(platelet，PLT)计数(OR=0.982，95%CI=0.971～0.996)是严重创伤患者发生创伤性凝血病的独立预测因素。结论:人FIB可有效改善创伤性凝血病患者的凝血功能，降低病死率、缩短ICU时间，创伤性凝血病与创伤严重程度、合并休克、低体温和重型颅脑损伤存在一定的相关性。     

柳钢新建氧化球团工程的设计特点

介绍了柳钢新建120万t／a链篦机-回转窑氧化球团工程的主要设计特点。该工程是我国第一条自行设计、设备国产化和采用清洁气体能源的链篦机-回转窑生产线。它的顺利投产，标志着我国炼铁炉料生产技术有了一个新的进步。     

探讨缩聚催化剂对聚酯切片质量的影响

通过试验，分析比较了江西Sb2O3、南宁Sb2O3和大连Sb(Ac)3三种缩聚催化剂对聚酯切片质量的影响。试验结果表明，Sb(Ac)3是优良的缩聚催化剂。     

Treatment of low turbidity water by sweep coagulation using bentonite

A novel strategy of sweep coagulation to treat low turbidity water is presented herein. Study findings demonstrated that an Na⁺‐saturated bentonite with medium cation exchange capacity (CEC) resulted in significant turbidity removal at a bentonite dosage of 30 mg dm^?3. Bentonite dispersion with fully delaminated platelets tended to undergo a more porous type of coagulation with intense face‐to‐face interactions of platelets and effectively entrapped TiO₂ particles in band‐type structures. This type of coagulation usually results in a large volume of settled flocs with a fluffy structure and excellent turbidity removal efficiency for sweep coagulation. The sign and magnitude of electrical charge on TiO₂ particles has a minor effect on the efficiency of sweep coagulation. Copyright © 2005 Society of Chemical Industry     

200 万t链箅机-回转窑球团生产线快速达产实践

介绍了邯钢200万t链箅机-回转窑酸性氧化球团生产线的工艺特点和主要设备,以及建成投产后试生产的有关情况。通过周密的部署和安排,该生产线实现了40天快速达产的目标。     

含碳冷固结团矿还原性测定方法探讨

含碳冷固结团矿与天然铁矿石、烧结矿、氧化球团矿不同、其还原性不能用减量法直接测定，需要根据还原后试样的化学成分计算获得，或根据试样中碳量的变化和试样的减量计算获得，但还原速率指数无法得到，本文以沙城铁厂试样为例进行了说明。     

HT－7托卡马克的八管弹丸注入器

介绍了用于ＨＴ－７托卡马克的的八管弹丸注入器的物理、工程设计原理和结构特点及配置的各种诊断手段。注入器采用气动发射技术，弹丸为１ｍｍ×１ｍｍ，１．２ｍｍ×１．２ｍｍ，１．５ｍｍ×ｌ．５ｍｍ圆柱体氢丸，丸速０．８～１．５ｋｍ／ｓ工作频率１～８Ｈｚ。     

高浓度焦化废水的预氧化-混凝处理研究

焦化废水成分十分复杂,污染物浓度高,性质非常稳定且水量大,是典型的难降解有机废水。使用H2O2为氧化剂,FeSO4.7H2O为催化剂的Fenton氧化法对钢铁焦化厂废水的终冷水进行了试验研究,氧化处理后用FeCl3为混凝剂对COD,NH3-N,色度及浊度的去除率进行了系统的考查。确定了氧化反应的影响因素和最佳的混凝实验条件。结果表明:当pH值控制在3左右,反应时间为30 min,反应温度为80℃,焦化废水的COD,NH3-N,浊度和色度去除率分别达到了93.1%,96.2%,90.8%和90.2%。