分析矩形光波导损耗的简易方法

利用有效折射率和修正的有效折射率方法对矩形光波导的损耗作了简单有效的分析，并且计算出了纵向传播系数和衰减系数的大小。     

非理想截面脊形介质光波导导波模式的研究

提出了一种求解任意截面形状脊形光波导的方法，先利用有效折射率的概念解出某种截面形状脊形光波导的等效折射率，再利用转移矩阵的理论求解出波导的模式色散方程。     

A TVD Scheme for Incompressible Flow Coupled With Different Turbulence Modles on A Ground-Mounted Square-RIB Flow

A finite-difference Total Variation Diminishing (TVD) numerical simulation model for coupling the Reynolds Averaged Navier-Stokes (RANS) equations, pressure-relative continuity equation and various k-ε turbulence models was developed to solve the incompressible flow based on the pseudo-compressibility method. The hyperbolicity of all these equations was studied and the discretization of the fully coupling equations with all the primal variables and source terms were made in this article. Numerical simulation for modeling the flow around a ground-mounted square rib was implemented and validated by comparing with the published wind tunnel experimental data. It is shown that such a numerical simulation method with a proper turbulence model has a very good accuracy to simulate the flow around a surface-mounted rib. It is concluded that the Renormalization Group (RNG) and Chen-Kim k-ε turbulence models have much better ability to predict the characteristics of the vortex structure and flow separation than the standard k-ε model.     

浅谈中承式钢管拱肋单拱桥的施工方法

右江平圩大桥钢管拱肋的制作、拼装、吊装、混凝土灌注的施工方法及注意事项 ,事故原因分析及处理。     

Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.     

Effect of intensified discharge in the vicinity of ribs on PDP performance

It was determined that the discharge in the vicinity of ribs should be intensified to obtain low‐voltage, high‐luminous efficacy, and high module efficiency. One possible way is to increase the space between ribs and the discharge surface. Even if the amount of space increases by only 2 or 3 µm, it still results in low discharge voltage, large discharge current, and high luminous efficacy. For that reason it might be important to control the micron‐sized particles included in the MgO crystal dispersed layers. Another preferable way is to use ribs with a low electric permittivity (ε) that are represented by porous ribs. Moreover, low‐ε ribs diffuses the high‐energy spots in plasma, resulting in a high luminous efficacy. They feature a significantly lower sustain voltage and a smaller parasitic capacitance as well to facilitate a help high module efficiency. Also, highly porous ribs are expected to increase their practical use in aspects of mechanical strength and impurity gas exhaustion.     

金属网架天线罩中金属梁杆的感应电流矩量法分析

用矩量法对金属网架天线罩中金属梁杆的感应电流率进行了理论分析,并利用此方法对导电圆柱体的感应电流率进行了仿真分析,数值仿真结果与经典方法吻合较好。针对常规矩量法在处理规则矩形柱体感应电流率中存在的问题提出了改进模型,结果可较理想地满足工程设计的需要。     

Extraction of locked-up coal by strengthening of rib pillars with FRP——A comparative study through numerical modelling

In some of the coalfields in India, coal seams are only developed but no extraction of pillars is possible due to the presence of surface or sub-surface structures and also non-availability of stowing materials which leads to huge amounts of coal being locked-up underground. Spontaneous heating and fire, accumulation of poisonous gases, severe stability issues leading to unsafe workings and environmental hazards are the major problems associated with the developed coal pillars. So, there is a pressing need for a technology for the mining industry to extract the huge amount of coal locked-up under different constraints. In this study, the locked-up coal is proposed to be extracted by artificially strengthening the rib pillars. The detailed comparative study is carried out to know the increase of extraction percentage of locked-up coal by strengthening the rib pillars with FRP. Extraction methodology is designed and studied through numerical modelling for its stability analysis to evaluate its suitability of application in underground.     

T形板肋对预制带肋底板混凝土叠合板弯曲疲劳性能的影响

为研究T形板肋对预制带肋底板混凝土叠合板弯曲疲劳性能的影响,对3块T形肋底板叠合板和1块整浇板进行弯曲疲劳性能对比试验,主要考察T形板肋与疲劳荷载幅值对试件疲劳破坏形态及疲劳损伤程度的影响,得到了在不同疲劳循环加载次数下的跨中动位移、混凝土应变、预应力筋应变、残余变形等,分析了在不同疲劳循环加载次数下的刚度退化情况、荷载-应变分布规律、裂缝分布规律及剩余承载力等。研究结果表明,经历200万次疲劳循环加载后,T形肋底板叠合板无明显的刚度和强度退化,增设T形板肋的叠合板能达到与整浇板相同的弯曲疲劳性能;T形肋底板叠合板正截面弯曲疲劳强度计算可采用普通预应力混凝土受弯构件正截面疲劳应力验算的4个假定,最终以此建立了其正截面弯曲疲劳强度验算方法。     

钢管混凝土柱节点开孔后的抗压性能

通过9根钢管混凝土试件的轴心受压试验,研究在钢管混凝土结构梁柱节点处开孔对钢管混凝土柱的轴压性能的影响及在开孔处设置加强环和加劲肋的增强作用,分析了开孔形状、开孔位置及加强环和加劲肋布置方法等对钢管混凝土柱轴心性能的影响。研究结果表明:所有试件均在端部和靠近加强环处出现钢管局部鼓曲;钢管壁开孔降低了节点处钢管对混凝土的约束刚度,但由于加强环和加劲肋的增强作用,钢管壁开孔对钢管混凝土柱的轴心受压承载力影响不明显。在试验研究的基础上,利用有限元分析软件ABAQUS对钢管混凝土节点处开孔后的钢管混凝土柱的轴压性能进行研究,分析钢管纵、环向应力及混凝土纵向应力沿钢管混凝土柱的分布特征.