火焰图像特征在火灾数字图像识别中的运用

火焰尖角数目和圆形度是早期火灾火焰的主要特征,本文主要论述了如何在数学形态学基础上,利用火灾火焰的两个特点判断和识别早期火情。实验中,对火焰的二值图像进行开运算,即先腐蚀,再膨胀,目的是为了对火焰图像进行形态学滤波,去噪。从实验结果可以看出,该算法可以很好的识别火焰和干扰源。     

A hybrid extended finite element/level set method for modeling phase transformations

A hybrid numerical method for modelling the evolution of sharp phase interfaces on fixed grids is presented. We focus attention on two‐dimensional solidification problems, where the temperature field evolves according to classical heat conduction in two subdomains separated by a moving freezing front. The enrichment strategies of the eXtended Finite Element Method (X‐FEM) are employed to represent the jump in the temperature gradient that governs the velocity of the phase boundary. A new approach with the X‐FEM is suggested for this class of problems whereby the partition of unity is constructed with C¹(Ω) polynomials and enriched with a C⁰(Ω) function. This approach leads to jumps in temperature gradient occurring only at the phase boundary, and is shown to significantly improve estimates for the front velocity. Temporal derivatives of the temperature field in the vicinity of the phase front are obtained with a projection that employs discontinuous enrichment. In conjunction with a finer finite difference grid, the Level Set method is used to represent the evolution of the phase interface. An iterative procedure is adopted to satisfy the constraints on the temperature field on the phase boundary. The robustness and utility of the method is demonstrated with several benchmark problems of phase transformation. Copyright © 2002 John Wiley & Sons, Ltd.     

列车对半圆拱形隧道中电磁波截止频率的影响

在空隧道中电磁波存在着截止频率，列车的存在改变了隧道的截面形状和尺寸，从而影响了电磁波的截止频率。应用有限元方法研究了煤矿井下巷道中列车的高度，宽度和位置对半圆拱形隧道电磁波截止频率的影响，其结果对铁路隧道，公安隧道等有限空间的无线通信也具有重要的意义。     

复合土工膜与防渗墙连接的大型剪切试验研究

围堰工程中常用复合土工膜连接防渗墙作为防渗体系,其连接部位的土工膜常会出现结构性破坏而造成集中渗漏现象。依据高土石围堰防渗体系中复合土工膜的受力特点,利用自主研制的低摩阻叠环式双向静动剪切试验机,考虑土工膜无伸缩节、普通竖向伸缩节和U型槽伸缩节3种连接型式,构建复合土工膜与防渗墙接头的结构模型,开展复合土工膜与防渗墙连接的大型剪切试验,研究不同连接型式下复合土工膜的受力变形机理。结果表明:①无伸缩节、普通竖向伸缩节和U型槽伸缩节3种连接型式下,复合土工膜的应变均随着剪切位移的增大逐渐增大,随着距防渗墙距离的增大逐渐减小;②3种连接型式下模型土体的应力-应变关系变化趋势基本一致,峰值应力变化不大;③无伸缩节连接时,靠近防渗墙位置土工膜的峰值应变为4×10^-3,普通竖向伸缩节连接时,相同位置处土工膜的峰值应变为3.5×10^-3,设置U型槽伸缩节后峰值应变为6.51×10^-4,与前2种连接型式相比,U型槽伸缩节较大程度地降低了土工膜的峰值应变,可以有效解决复合土工膜在防渗墙接头处的应变集中问题。研究成果可为高土石围堰工程防渗体系的设计和施工提供依据。     

较小半径溢洪弯道急流超高的研究

为了探求急流弯道的超高及其相关的影响因素,通过对较小半径弯道急流的水流现象的描述,指出较小半径弯道凹岸水流受惯性离心力和冲击力的共同作用。在此基础上,利用动量原理,推导出了较小半径弯道水流超高公式,与试验资料对比,该理论的合理性得到了证实。还讨论了弯道水流各因素同超高的关系,结果表明,弯道的超高和宽度几乎成正比,弯道的转角影响超高很大,当弯道半径越小,其超高将增加越快。     

阿尔塔什水利枢纽工程深厚砂砾石覆盖层混凝土防渗墙施工技术研究

阿尔塔什水利枢纽工程是我国在建面板堆石坝工程之一,其深厚的砂砾石覆盖层和庞大的坝体,在施工和运行过程中均会对防渗墙的应力应变产生较大的影响,处理不好直接会影响到大坝整体防渗效果和工程安全。如何在保证施工质量的前提下,优化施工方案,改善防渗墙应力状况,是施工技术研究重点。通过对防渗墙的受力特性、深厚覆盖层的工程特性分析和研究,从防渗墙成墙槽段划分、墙段连接技术、强漏失地层成槽技术和固壁泥浆配比等关键技术上进行优化和改进,有效的消减了防渗墙在坝体填筑和蓄水过程中的应力应变集中,保证防渗墙的成墙质量和运行效果。     

基于Matlab的展茅流域圩区防洪排涝分析

基于Matlab强大的数学计算功能与友好的界面,针对舟山市普陀区展茅流域进行防洪排涝分析,选择最不利外海潮位和内河水位组合,采用圩区排涝水文模拟法,并利用Matlab软件所提供的三次样条函数拟合、二元散乱点上的插值等工具编程实现了计算．实例说明了该方法应用的有效性．结果表明,该方法计算过程简单,可供工程设计和施工参考．     

高选择性陷波超宽带天线设计

The resonant properties of the interdigital capacitance loading loop resonator (IDCLLR) and its dual counterpart complimentary interdigital capacitance loading loop resonator (CIDCLLR) are studied. Due to the high capacitance/inductance of the IDCLLR/CIDCLLR, the resonators can generate lower resonant frequencies and narrower resonant bandwidths than many other structures. A compact ultra-wideband (UWB) antenna with quadruple sharp band-notching characteristics is presented by utilizing IDCLLRs and CIDCLLRs. Measured results show that the proposed antenna has a wide bandwidth from 3 to 11GHz(VSWR<2), with four sharp notched bands centered on 3.5, 5.2, 5.8 and 7.5GHz, respectively, avoiding the elimination of many useful frequencies. Moreover, the presence of IDCLLRs and CIDCLLRs scarcely affects the performance of the UWB antenna at its operating frequencies.     

Low Distortion Quick Response Noise Filter Realized with Average Peaks Method

The filter proposed in this paper is expected to reduce noise whose frequency is lower than higher order harmonics of real signals. It is based on the distributive characteristics of noise, and uses analog circuits to select the high peak and low peak of the input signal and applies their average in order to reduce random noise. So it has no cutoff frequency and higher order harmonics of real signals are remained. As a result, it gives an instant response to changes in input signals and retains the integrity of real signals. Furthermore, it has only a small phase delay. The simulation results of slew rate, phase delay and spectral analysis under MULTISIM indicate that the quick response noise filter achieves a high slew rate of 472 V/ms and the phase shift is nearly zero. By having it used in a color tester design, it is also demonstrated that the proposed filter effectively reduces noise and remains signal integrity. With the filter’s help, the relative standard deviation of the spectrograph decreases from 1% to 0.22%, indicating better stability.     

一种低副瓣锐截止波束赋形阵列天线设计

采用联合DFP和BFGS变尺度,结合全局寻优算法,通过优化阵列各单元馈电幅度和相位分布,设计了一种满足低副瓣锐截止波束赋形要求的阵列天线.该阵列由26个印刷振子单元天线组成,各单元馈电电路采用带状线环形桥.馈电电路网络采用带状线结构,整个馈电网络和印刷天线采用一体化设计,具有插入损耗小,结构紧凑的特点.实测表明,3dB波束宽度为11°,水平面锐截止为5.83dB/(°),副瓣低于-20dB.天线设计满足指标要求,并已获得应用.