Preparation, Characterisation and Catalytic Behaviour of a New TeVMoO Crystalline Phase

TeM_xMo_1.7O mixed oxides (M = V and/or Nb; x = 0-1.7) have been prepared by calcination of the corresponding salts at 600 °C in an atmosphere of N₂. A new crystalline phase, with a Te/V/Mo atomic ratio of 1/0.2-1.5/1.7, has been isolated and characterised by XRD and IR spectroscopy. This phase is observed in the TeVMo or TeVNbMo mixed oxide but not in the TeNbMo mixed oxide. The new crystalline phase shows an XRD pattern similar to Sb₄Mo₁₀O₃₁ and probably corresponds to the M1 phase recently proposed by Aouine et al. (Chem. Commun. 1180, 2001) to be present in the active and selective MoVTeNbO catalysts. Although these catalysts present a very low activity in the propane oxidation, they are active and selective in the oxidation of propene to acrolein and/or acrylic acid. However, the product distribution depends on the catalyst composition. Acrolein or acrylic acid can be selectively obtained from propene on Nb-free or Nb-containing TeVMo catalysts, respectively. The presence of both V and Nb, in addition to Mo and Te, appears to be important in the formation of acrylic acid from propene.     

Synthesis and characterization of CePO4 nanorods via solvothermal process

One-dimensional cerium phosphate(CePO4) nanorods were successfully synthesized by a facile and simple solvothermal method at 150 ℃ for 12 h, using Ce(NO3)3·6H2O and NaH2PO4·2H2O as the starting materials. Phase and morphologie of the as-synthesized CePO4 products, characterized by XRD, FESEM, and TEM, were proved to be perfect and uniform hexagonal CePO4 nanorods with aspect ratio of more than 100. The photoluminescence(PL) spectrometer was used to investigate the optical properties of the assynthesized hexagonal CePO4 nanorods.     

Improved high-rate performance and cycling stability of 1D LiFePO4 nanorods by a facile annealing process

To alleviate the main limitations of lithium ion diffusion rate and poor electronic conductivity for LiFePO4 cathode material, it is desirable to synthesize nano-size LiFePO4 material due to its enhanced electronic and lithium ion transport rates and thus an improved high-rate performance. However, our previous synthesized LiFePO4 nanorods only exhibited low high-rate and slightly unstable cycle performance. Possible reasons are the poor crystallization and Fe2+ oxidation of LiFePO4 nanorods prepared by hydrothermal method. In this paper, LiFePO4 nanorods were simply dealt with at 700 ℃ for 4 h under the protection of Ar and H2 mixture gas. The electrochemical properties of LiFePO4/Li cells were investigated by galvanostatic test and cyclic voltammetry(CV). The experimental results indicated that the annealed LiFePO4 nanorods delivered an excellent cycling stability and obviously improved capacity of 150 mA·h·g-1 at 1C, and even 122 mA·h·g-1 at 5C.     

碲粉涂料防止铸件渗漏作用的探讨

介绍用碲涂料解决铸件渗漏的方法,对碲粉涂料防渗漏的作用形式、机理进行了探讨,并指出一些使用中的注意事项.     

纵向多孔及实心ZnO微纳米棒的制备、表征及其光催化性能研究

以硝酸锌和六次甲基四胺为原料,水为溶剂,采用低温水热法制备出具有优异光催化性能的六方纤锌矿结构ZnO微纳米棒,并研究了合成过程中磁力搅拌及原料溶液浓度对制备产物形貌及光催化性能的影响,建立了其光催化降解甲基橙的动力学方程。结果表明,搅拌条件下制备的产物为纵向多孔的棒状ZnO,无搅拌条件下制备的产物为实心ZnO纳米棒.优选出的硝酸锌和六次甲基四胺浓度均为0.025mol/L。相比于实心ZnO纳米棒,纵向多孔的棒状ZnO具有更优异的光催化性能,在紫外光照射20min后,对甲基橙的降解率达到100%。通过动力学模型拟合发现,纵向多孔的棒状ZnO具有更大的催化速率常数(0.2942 min~(-1)),是实心ZnO纳米棒催化速率常数(0.1306min~(-1))的2.25倍。     

金纳米棒的合成、修饰及与肿瘤细胞的相互作用

作为金属纳米粒子中的典型代表,金纳米棒在近红外区有较强的吸收,且容易合成得到尺寸均匀的产物,这使它在医学上有着巨大的应用潜力.但是关于金纳米棒的生物毒性以及金纳米棒与肿瘤细胞相互作用的机理目前尚未得到很好的解决.实验进行了金纳米棒合成条件的优化,成功合成了所需波长范围的金纳米棒,利用巯基十一酸层层组装法制备了单分散的表...     

Enhanced surface plasmon resonance detection of DNA hybridization based on ZnO nanorod arrays

We demonstrated an enhanced surface plasmon resonance detection incorporating ZnO nanorod arrays (NRAs) built on a thin gold film. ZnO NRAs were fabricated by wet chemical growth method and used for the detection of DNA hybridization. Experimental results exhibited that ZnO NRAs provided a notable sensitivity improvement by more than 3 times, which is attributed to an increase in the surface reaction area. The measured sensitivity enhancement matched well with the numerical analyses based on the effective medium theory. Our approach is intended to show the feasibility and extend the applicability of the ZnO-based SPR biosensor to diverse biomolecular binding events.     

基于金纳米棒的DNA杂交检测

金纳米棒具有独特的光学性质与良好的生物适应性,在生物医学领域得到了日益广泛的应用.利用种子生长法,通过改变表面活性剂十二烷基二甲基苄基氯化铵(BDAC)的浓度所制备的8种不同长径比(AR)的金纳米棒,具有不同位置的纵向表面等离子共振(SPR)峰.在金纳米棒和非标记探针DNA的混合盐溶液中加入靶标DNA后检测,发现金纳米...     

Optical properties of samarium doped zinc-tellurite glasses

Glasses with the composition, (Sm₂ O ₃) _x (ZnO)_(40-x)(TeO ₂)₍₆₀₎, were prepared by conventional melt quenching method. The density, molar volume, and optical energy band gap of these glasses have been measured. The refractive index, molar refraction and polarizability of oxide ion have been calculated by using Lorentz-Lorentz relations. Optical absorption spectra of these glasses were recorded in the range 300–700 nm at room temperature. The oxide ion polarizabilities deduced from two different quantities, viz. refractive index and optical energy band gap, agree well compared with other glasses. The nonlinear variation of the above optical parameters with respect to samarium dopant has been explained.     

Research on the preparation of amorphous diamond nanorod arrays and their excellent field emitting properties

During recent years, with the rapid development of IT and micro-electrics, the ultra- thin, ultra-large display screen with low power consumption, has attracted more and more attention. As the core of devices, cathode materials are made much more demands in the vacuum microelectronic technology. So the materials with low power consumption, outstanding field emission properties and extreme stability are very important. To resolve the problem, many researchers have been making efforts. Diamonds…