Contribution of metal vapor mass at periphery part of pulsed arc to electromagnetic force in weld pool

The arc welding has been used in various welding methods because it is inexpensive and high in strength after welding. However, it is a problem that accidents such as collapse of the bridge occur because of the welding defects. The welding of low cost and high productivity is required without the welding defects. The pulsed TIG welding is inexpensive and capable of high‐quality welding. The electromagnetic force contributing to penetration changes because the transient response of arc temperature and iron vapor generated from anode occurs. However, the analysis of pulsed TIG welding with metal vapor has been elucidated only metal vapor concentration near anode with transient phenomenon and heat flux. Thus, the theoretical elucidation of penetration depth with control factor has not been researched. In this paper, the contribution of metal vapor mass at the periphery part of pulsed arc to the electromagnetic force in the weld pool is elucidated. As a result, the iron vapor mass at periphery part decreased with increasing the frequency. The iron vapor was stagnated at axial center within one cycle. The electromagnetic force to the penetration depth direction in weld pool increased at axial center. Therefore, the metal vapor mass at periphery part plays an important role for the electromagnetic force increment at axial center.     

[Zr0.73(Cu0.59Ni0.41)0.27]87Al13合金过冷液相区热塑性成形研究

为探究[Zr_(0.73)(Cu_(0.59)Ni_(0.41))_(0.27)]_(87)Al_(13)非晶合金的热塑性成形性能以及绘制其对应的热加工图谱,用Gleeble3500型热模拟压缩实验机对该非晶合金进行不同参数下的热模拟压缩实验。结果表明,合金在压缩过程中变形行为由牛顿流变演变为非牛顿流变;同时,过高或过低的热加工温度均能导致合金晶化;进一步对数据分析得到该合金在不同热塑性成形参数下的功率耗散图与流变失稳图,并绘制出相应的热加工谱图,谱图分析结果表明,该合金在温度为420与430℃、应变速率为10~(-3) s~(-1)时具有较高功率耗散系数且没有失稳区域,因此,合金可选的热塑性加工参数为温度420～430℃,应变速率10~(-3) s~(-1)。     

Regulation of sensory nerve conduction velocity of human bodies responding to annual temperature variations in natural environments

The extensive research interests in environmental temperature can be linked to human productivity / performance as well as comfort and health; while the mechanisms of physiological indices responding to temperature variations remain incompletely understood. This study adopted a physiological sensory nerve conduction velocity (SCV) as a temperature‐sensitive biomarker to explore the thermoregulatory mechanisms of human responding to annual temperatures. The measurements of subjects’ SCV (over 600 samples) were conducted in a naturally ventilated environment over all four seasons. The results showed a positive correlation between SCV and annual temperatures and a Boltzmann model was adopted to depict the S‐shaped trend of SCV with operative temperatures from 5°C to 40°C. The SCV increased linearly with operative temperatures from 14.28°C to 20.5°C and responded sensitively for 10.19°C‐24.59°C, while tended to be stable beyond that. The subjects’ thermal sensations were linearly related to SCV, elaborating the relation between human physiological regulations and subjective thermal perception variations. The findings reveal the body SCV regulatory characteristics in different operative temperature intervals, thereby giving a deeper insight into human autonomic thermoregulation and benefiting for built environment designs, meantime minimizing the temperature‐invoked risks to human health and well‐being.     

网络安全威胁因素及其常见网络安全技术分析

社会经济的快速发展促进了科学技术水平的显著提升，社会生产生活各个领域当中对计算机网络的应用程度不断提升，当前，网络已经成为了人们日常生活与工作的重要组成部分。为此，加强对网络安全等因素影响研究就显得格外重要。网络环境关系着用户的使用质量，更加影响人们的工作效率，加强对网络安全技术的研究时解决相关问题的核心内容。本文针对网络安全威胁因素以及常见的网络安全技术进行了简要分析。     

Temperature cycling and its effect on mechanical behaviours of highporosity chalks

Temperature history can have a significant effect on the strength of water-saturated chalk.In this study,hydrostatic stress cycles are applied to understand the mechanical response of chalk samples exposed to temperature cycling between each stress cycle,compared to the samples tested at a constant temperature.The total accumulated strain during a stress cycle and the irreversible strain are reported.Chalk samples from Kansas(USA)and Mons(Belgium),with different degrees of induration(i.e.amount of contact cementation),were used.The samples were saturated with equilibrated water(polar)and nonpolar Isopar H oil to quantify water weakening.All samples tested during 10 stress cycles with varying temperature(i.e.temperature cycled in between each stress cycle)accumulated more strain than those tested at constant temperatures.All the stress cycles were performed at 30℃.The two chalk types behaved similarly when saturated with Isopar H oil,but differently when saturated with water.When saturated with water,the stronger Kansas chalk accumulated more total strain and more irreversible strain within each stress cycle than the weaker Mons chalk.     

Suitability,efficiency and microbiological safety of novel physical technologies for the processing of ready‐to‐eat meals,meats and pumpable products

Consumer studies and market reports show an increase in consumption of ready‐to‐eat (RTE) foods. Although conventional processing technologies can in most cases produce safe products, they can also lead to the degradation of nutritional compounds and negatively affect quality characteristics. Consumers strongly prefer food that is minimally processed with the maximum amount of health‐promoting substances. Novel processing technologies as pre‐ or post‐treatment decontamination methods or as substitutes of conventional technologies have the potential to produce foods that are safe, rich in nutrient content and with superior organoleptic properties. Combining novel with conventional processes can eliminate potential drawbacks of novel technologies. This review examines available scientific information and critically evaluates the suitability and efficiency of various novel thermal and nonthermal technologies in terms of microbial safety, quality as well as nutrient content on the production of RTE meals, meats and pumpable products.     

腹腔手术后重症患者心肌损伤的危险因素

目的探讨腹腔手术后重症患者心肌损伤的发生情况及可能的危险因素。方法回顾性分析北京大学人民医院2017年1月至2019年1月腹腔手术后重症患者的一般临床资料及心肌损伤情况,收集并观察基础病史、术中(手术时间、是否急诊手术、术中出血>800 ml和术中低血压等)及术后指标(改良氧合指数、血乳酸、急性肾损伤和术后24 h内使用升压药情况等)。根据术后是否发生心肌损伤,将患者分为心肌损伤组和非心肌损伤组,采用Logistic回归分析腹腔手术后重症患者心肌损伤的危险因素。结果在纳入的803例腹腔手术后重症患者中,心肌损伤发生率为17. 2%(138/803),而急性心肌梗死发生率仅为0. 9%(7/803)。单因素分析显示,慢性肾功能不全病史、手术时间、急诊手术、术中低血压、术后24 h内使用升压药、高APACHEⅡ评分及术后即刻急性肾损伤与术后重症患者心肌损伤相关(P<0. 05)。多因素回归分析显示,急诊手术(OR=3. 14,95%CI:1. 76～5. 60,P<0. 001)、术后24 h内使用升压药(OR=2. 26,95%CI:1. 23～4. 15,P=0. 008)、APACHEⅡ评分(OR=1. 05,95%CI:1. 01～1. 09,P=0. 008)和术后急性肾损伤(OR=3. 18,95%CI:1. 78～5. 69,P <0. 001)与腹腔手术后重症患者发生心肌损伤独立相关。结论重症患者腹腔手术后心肌损伤发生率高,急诊手术、术后24 h内使用升压药、高APACHEⅡ评分和术后急性肾损伤是导致腹腔手术后重症患者发生心肌损伤的独立危险因素。