Effects of zirconium silicate and chromite addition on the microstructure and bulk density of magnesia–magnesium aluminate spinel-based refractory materials

Six synthesized magnesium aluminate spinel-based refractory compositions used in steel and cement applications, were prepared using a two stage sintering process at 1760 °C, starting with approximately 1:1 wt% ratio of pure magnesia and alumina with additions of zirconium silicate (0.5, 1.0 and 2.0 wt%) and chromite (2.0, 3.0 and 5.0 wt%). These compositions were investigated for effects on densification, chemical and mineralogical phases formed.     

华北油田鄚东地区深井钻井液技术

鄚东地区钻井过程中经常发生垮塌、卡钻、井漏等复杂事故。该地区深井钻井采用了抑制性及封堵性较强的铵基沥青树脂高密度钻井液体系,并根据地层特点,对不同井段制定了相应的钻井液维护处理措施。结果表明,该钻井液体系抑制性好,抗温、抗污染能力强,性能稳定,成功地控制了复杂事故的发生,满足了该地区深层钻井的要求。     

含H2S井完井液用除硫剂和缓蚀剂

含H_2S井完井液对井下金属管串具有腐蚀性。采用锌基或铁基螯合物除硫剂及咪唑啉缓蚀剂可有效地防止这种腐蚀的发生。本文对H_2S的腐蚀、除硫剂和缓蚀剂产品及其对产层的损害作了介绍与探讨。     

聚合物泥浆降粘剂PT－1降粘作用研究

ＰＴ－１降粘剂是顺丁烯二酸（酐）与乙烯基单体的共聚物。本文通过扫描电镜、粒度分析、Ｘ射线衍射等分析测定，研究了ＰＴ－１在膨润土泥浆和聚合物泥浆中的降粘作用，探讨了ＰＴ－１的降粘机理。     

The effect of the addition of chemical materials on the sintering of biomass ash

In this work the use of chemical materials (additives) in order to reduce the biomass ash sintering tendency is investigated. A total of seven additives (kaolin, limestone, lime, dolomite, calcined dolomite, ophite and alumina) and silica utilised as reference material were mixed in different proportions with the ash of five different biomasses, and then a laboratory sintering test was performed on the mixtures to determine the effect of the additives on the sintering. The biomasses studied in this work were: thistle biomass, brassica carinata biomass, barley straw, almond shell and orujillo (olive oil extraction residue). The sintering decrease among the additives was studied using X-ray diffraction.Kaolin, lime, calcined dolomite and ophite are proved to be suitable to reduce the biomass sintering in all the considered cases. Dolomite, limestone and, particularly, the tabular alumina, offer poorer results. The dilution of the biomass ash is considered the main process involved in the decrease of the sintering for most of the additives, with the exception of kaolin whose chemical reactions could be more important than the dilution effect.     

聚合物泥浆抑制剂的发展动向

聚合物抑制剂是聚合物泥浆的重要组成部分。本文报导了聚合物抑制剂的发展动向,介绍了作为聚合物泥浆抑制剂的阳离子型聚合物、复合离子型聚合物、非离子型聚合物及改性的部分水解聚丙烯酰胺。     

Effect of Dyebath Additives on Decolorization Efficiency in the Ozonation of Dyehouse Effluent

It is necessary to study the effect of dyebath additives on decolorization efficiency in order to optimize ozone-based decolorization processes as the consumption of ozone can be reduced through selecting ozone favorable additives. The effect of 5 dyebath additives viz. electrolytes (sodium chloride and sodium sulfate), chelating agent (ethylene diamine tetra acetic acid or EDTA), reducing agent (sodium dithionite), optical brightener (Uvitex BHT), and dispersing agent (Zetex DNVL) was investigated. All of the additives showed synergistic effect as addition of sodium chloride, sodium dithionite and Zetex DN-VL markedly improved decolorization efficiency, but EDTA and optical brightener showed negative effect. Sodium sulfate did not show any positive or negative effect on decolorization efficiency.     

Study of siloxane additives migration to the surface of polyester-(melamine)-polyurethane coatings: Aging effects after ethanol cleaning

This study determines the influences of siloxane flow agents’ migration on the outermost surface composition of clearcoats, before and after ethanol cleaning. This evaluation is undertaken to improve adhesion of pressure-sensitive adhesives (PSAs) on automotive paint systems. Most of the siloxane flow agents segregate from the bulk to the clearcoat outermost surface during curing. These additives can cover until 50% of the surface area but X-ray photoelectron spectroscopy (XPS) and time of flight-secondary ion mass spectrometry (ToF-SIMS) analyses indicate that they can be removed by ethanol cleaning. Composition of the cleaned clearcoats surfaces are similar as the composition of clearcoat formulated without siloxane additives: the polyester-(melamine)-polyurethane network is more detected than before cleaning. However, outermost surface analyses show that several aging weeks increase the siloxane additives segregation. This post-cleaning migration modifies the clearcoat surface composition and cancels the chemical modifications due to the ethanol cleaning. XPS analyses show that silicon concentrations after cleaning and aging are inversely proportional to the initial silicon concentrations measured after curing. It highlights that aging has to be controlled to improve adhesion of PSAs on clearcoats. A second ethanol cleaning on aged clearcoats is not effective to remove these new siloxane additives. Their formulation should be different from the flow agents and it could modify their solubility in ethanol. This result could also indicate that these new siloxane additives are not located on the last molecular layer of surface and they would not be soluble in ethanol.     

添加物对氮化硼材料性能的影响

研究了引入锆英石和氧化铝等添加物的热压氮化硼材料的抗氧化性、热震稳定性及力学性能。结果表明，向氮化硼中引入锆英石和氧化铝后，虽然未能按预期设想生成莫来石，但却对提高氮化硼材料的抗氧化性、热震稳定性及力学性能有利。     

煤矸石混合材对标准稠度影响的灰色关联分析

利用灰色关联分析的数学方法,对利用煤矸石作水泥混合材所产生的标准稠度用水量改变的影响,做了分析。论述了不同细度水泥条件下,煤矸石粒径分布范围对水泥需水量的影响。发现了在水泥较细时,在粒径范围<5 μm下的煤矸石颗粒,对标准稠度用水量影响最大;在水泥较粗时,粒径范围在5～10 μm下的煤矸石颗粒,对标准稠度用水量影响最大。