外墙保温系统中粘结材料的检测技术分析

选择了几份典型的外墙外保温系统标准,通过对这几份标准中胶粘剂和抹面胶浆的成型和检测方法的比较,分析了现有检测技术的优劣,并结合工作实践提出了建议。     

Digital image correlation strain measurement of thick adherend shear test specimen joined with an epoxy film adhesive

Structural bonding and bonded repairs of composite materials become more and more important. Understanding the strain within the bondline leads to suitable bonding design. For new design approaches the strain distribution within the bondline has to be analyzed. Thus, often finite element analysis (FE) are used. However, a huge challenge is the availability of reliable material properties for the adhesives and their validation. Previous work has shown that it is possible to measure the small displacements resulting within thin epoxy film adhesives using high resolution digital image correlation (DIC). In this work a 2D DIC setup with a high resolution consumer camera is used to visualize the strain distribution within the bondline over the length of the joint as well as over the adhesive thickness. Therefore, single lap joints with thick aluminum adherends according to ASTM D 5656 are manufactured and tested. Local 2D DIC strain measurements are performed and analyzed. Two different camera setups are used and compared. The evaluation provides reliable material data and enables a look insight the bondline. The results of the full field strain data measured with DIC are compared with numerical simulations. Thus, material models as well as chosen parameters for the adhesive are validated. Compared to extensometers, giving only point-wise information for fixed measuring points, the DIC allows a virtual point-wise inspection along the complete bondline. Furthermore, it allows measuring close to the bondline to reduce the influence of adherend deformation.     

Assessment of local strain field in adhesive layer of an unsymmetrically repaired CFRP panel using digital image correlation

The present study focuses on experimental investigation of through the thickness displacement and strain field in thin adhesive layer in single sided (unsymmetrical) patch repaired CFRP (carbon fiber reinforced polymer) panel under tensile load. Digital image correlation (DIC) technique is employed to acquire the displacement and strain (longitudinal, peel and shear) field. Experimental determination of shear transfer length based on shear strain field obtained from DIC is introduced to estimate the optimum overlap length which is an essential parameter in patch design for the repair of CFRP structures. Further, DIC experiment with magnified optics is performed to get an insight into complex and localized strain field over thin adhesive layer especially at critical zones leading to damage initiation. The failure mechanism, load displacement behavior, damage initiation and propagation are closely monitored using DIC. The influence of patch edge tapering on strain distribution in adhesive layer is also investigated. The DIC successfully captures the global and localized strain field at critical zones over thin adhesive layer and further helps in monitoring the damage based on strain anomalies. Strains are found to have maximum magnitude at the patch overlap edge and the shear strain level in adhesive layer is higher than the peel strain. Normal tapering increases the peel strain and has negligible influence on shear strain level in adhesive layer. The recommended overlap length is found to be consistent with the recommendation in the literature. Whole field strain pattern and the overlap length obtained from experiment are further compared with the finite element analysis results and they appear to be in good coherence.     

高性能大尺寸永磁体粘合强度的测定

介绍了一种用三点弯曲试验法测定高性能大尺寸粘接永磁体粘合强度的方法，及利用布氏硬度计的加载系统，实现100％检验粘接质量的方法。     

不同类型染料的缺氧生物降解性能研究

对24种常用染料在缺氧条件下的降解性能作了研究，探讨了不同类型、不同化学结构染料生物降解性的内在影响因素，得出了碱性染料和X型染料最易降解，K型染料次之，M型、KN型再次之。此外，染料的分子量、取代基数量、发色母体基团等也是影响染料缺氧生物降解性能的一个重要因素。     

钻井液完井液质量监控体系

经多年实践，中原油田建立了钻井过程中的钻井液完井液质量监控体系。讨论了钻井过程中钻井液完井液质量监控体系的控制指标及对有关指标的要求，对油气层保护工作措施和效果进行了分析。钻井过程中应进一步加强钻井液完井液质量监控措施，形成更加规范的监督、监测一体化队伍。     

江西省抚州市水利工程产权制度改革的调查与思考

介绍了江西省抚州市水利产权改革前的基本情况和改革的措施，总结了水利产权制度的经验。     

中原油田深井大井眼段钻井液工艺

濮深8井是中原油田在西部洼陷南部寻找接替储量的一口重点深探井,也是中原油田第一口井深达6000m的超深井。分析了濮深8井钻井液的配备及维护和处理技术,得出深井大井眼段钻井液工艺技术存在以下问题:井眼大,钻井液量及钻屑量多,处理时间长,处理剂用量多,处理频繁;返速低使钻井液清洗井眼的能力减弱;井下温度高使处理剂的作用明显降低,二氧化碳的侵入使钻井液性能变差。钻井液维护处理的较好方法是定时、定量补充处理剂胶液。固相控制是深井大井眼段钻井液工艺中的关键问题,必须配套并且有效地使用固控设备,以维护好钻井液性能。     

ABS／PC／MMA类共聚物Q三元共混体系的性能和形态

本文研究了ABS/PC甲基丙烯酸甲酯(MMA)共聚物Q三元共混物的性能与Q含量的关系,对不同Q含量下共混物的拉伸、冲击、弯曲、耐热、熔体指数等性能进行了测试,并用扫描电镜观察了该三元共混物的形态。结果表明,加入共聚物Q可增加共混体系的相容性,在适当组成下可使共混物的弯曲强度提高到原来的1.7倍,同时其他力学性能有所提高或不受损失;共混物的熔体指数能符合工业生产要求。从经济角度看,Q价格也较低。因而ABS/PC/Q三元共混物可望开发为具有重要实际意义的塑料合金。     

快干性瓦楞纸箱粘合剂的研制

本文叙述了快干性瓦楞纸箱粘合剂的配制及工艺过程。实验结果表明，该粘合剂具有快的干燥速度和良好的性能