Feasibility of fishmeal replacement by shrimp head silage protein hydrolysate in Nile tilapia (Oreochromis niloticus L) diets

This study provides information on the use of shrimp head silage protein hydrolysate (SPH) as an alternative protein source for tilapia feeding. Six diets (28% protein, 12% lipid) were prepared where fishmeal protein was replaced at levels of 0 (control), 10, 15, 20, 25 and 30% with the hydrolysate. The diets were supplied to Nile tilapia fry (338 mg initial weight) stocked in plastic recirculating 20 l tanks (10 animals per tank), with three replicates per treatment. After an 8 week experimental period, fish fed the diets containing 10 and 15% SPH showed significantly better performance in terms of final body weight, weight gain (%), mean daily weight gain (mg day^?1), specific growth ratio and feed conversion ratio than those fed the control diet (fishmeal as protein source) and higher‐SPH diets. It is concluded that shrimp head hydrolysate is a promising alternative protein source for tilapia feeding, improving growth ratio at dietary inclusion levels as high as 15%. In addition, the diets with added shrimp silage protein were well accepted by the fish, which avidly consumed the feed during the experiment. © 2002 Society of Chemical Industry     

农业管理措施对土壤有机碳动态变化的影响

土壤碳固定问题已成为陆地生态系统碳循环研究的热点问题。土壤碳固定是缓解温室效应加剧的有效方法之一。土壤有机碳含量变化受土地利用方式和耕作措施的强烈影响。将自然土壤转变为耕作土壤会导致土壤碳库的迅速下降,使土壤损失有机碳4.1-5.0×1013kg之间。采用新的农业措施会使碳损失量的60-70%重新被固定。这些措施有保护性耕作(少耕或免耕)、合理施用肥料、覆盖作物、应用深根且富含木质素的作物等。土壤除了固定有机碳外,干旱和半干旱地区土壤还具有固定无机碳的巨大潜力。文章还简要介绍了评价土壤有机碳的两种方法,并对今后的工作提出了几点建议。     

A coordinated reverse logistics system for regional management of multi-source hazardous wastes

This paper presents a coordinated reverse logistics (CRL) management system for the treatment of multi-source hazardous wastes in a given region, in this case, a specific high-technology manufacturing zone. A linear multi-objective analytical model is formulated that systematically minimizes both the total reverse logistics operating costs and corresponding risks. In addition to inter-organizational logistics operating factors, environmental concerns are considered and formulated as corresponding risk-related constraints. Using the proposed model, results of numerical studies indicate that when the aspect of risk-induced penalties is not considered, the operational costs of regional hazardous-waste management can be efficiently reduced by 58%, compared to the existing operational costs at the study site. In addition, it is also observed that the corresponding weight associated with the risk-induced objective function embedded in the proposed model seems to have a significant effect on the CRL costs.     

Electrochemical oxidation of several chlorophenols on diamond electrodes Part I. Reaction mechanism

The electrochemical oxidation of 4-chlorophenol, 2,4-dichlorophenol and 2,4,6-trichlorophenol aqueous wastes using boron-doped diamond electrodes was studied. This treatment led to complete mineralization of the wastes regardless of the operating conditions. A simple mechanistic model is consistent with the voltammetric and electrolysis results. According to this model, the electrochemical treatment of chlorophenol aqueous wastes involves the anodic and cathodic release of chlorine followed by the formation of non-chlorinated aromatic intermediates. Subsequent cleavage of the aromatic ring gives rise to non-chlorinated carboxylic acids. Chlorine atoms arising from the hydrodehalogenation of the chlorophenols are converted into more oxidized molecules at the anode. These molecules react with unsaturated C₄ carboxylic acid to finally yield trichloroacetic acid through a haloform reaction. The non-chlorinated organic acids are ultimately oxidized to carbon dioxide and the trichloroacetic acid into carbon dioxide and volatile organo-chlorinated molecules. Both direct and mediated electrochemical oxidation processes are involved in the electrochemical treatment of chlorophenols.     

Carbon mineralization from composts and food industry wastes added to soil

We have studied the short term C mineralization of six wastes from important food industries, one sludge from a biogas plant and three composts. All the wastes were characterized chemically and fractionated according to the Van Soest method. The fresh wastes were incubated under controlled environment conditions to determine the C mineralization rate. Based on first order mineralization kinetics, we calculated the hypothetical amount of stable C in the wastes as the amount of C that would not be mineralized within one year under field conditions. The percentage of stable organic C in the organic matter was in general much larger in the composts than in the other wastes, but when expressed on dry matter, the non-composted wastes had comparable or larger amounts of stable organic C than the composts and have a considerable potential for supplying organic matter to soils, and hence for C sequestration. The amount of stable organic C could best be predicted by the total N content of the wastes (R _a ² = 0.855), whereas the results of the fractionation had very little predictive power, probably due to problems related to the high ash content of some of the wastes. An index that combined stable organic C and N and P content in the wastes was calculated to assess possible limitations for applying these wastes in agriculture. Under current nutrient legislation in Western Europe, a number of these wastes will only be usable in small amounts, but these and other food industry wastes could still prove to be valuable soil amendments in nutrient poor situations, for increasing soil organic C content and supplying nutrients.     

Butyltin Species and Inorganic Tin in Water and Sediment of the Detroit and St. Clair Rivers

Water and sediment samples from 29 locations in the Detroit and St. Clair rivers were analyzed for the highly toxic tri-n-butyltin (Bu₃Sn⁺) species and for the less toxic di-n-butyltin (Bu₂Sn²⁺) and n-butyltin (BuSn³⁺) species and inorganic tin. In general, locations sampled in the St. Clair River were less contaminated with butyltin species than those in the Detroit River. Inorganic tin and BuSn³⁺ were detected in over 90% of all subsurface water samples, while Bu₂Sn²⁺ and Bu₃Sn⁺ were detected in 45 and 28% of the same samples, respectively. The highest concentration ofBu₃Sn⁺ in subsurface water, 5.9 × 10^?10 mol Sn/L, was at the mouth of the Ecorse River, a tributary of the Detroit River. The three butyltin species and inorganic tin were also detected in 23–46% of all sediment samples. The highest concentrations of Bu₃Sn⁺ in sediment were found close to the mouths of the River Rouge, another tributary of the Detroit River, and the Ecorse River, and were 6.2 × I0^–7 and 1.7 × I0^–7 mol Sn/kg dry weight, respectively, for the top 2 cm of sediment.     

Results of familiarization of and prospects for a procedure for the burning of wastes in a vortical fluidized bed

Problems that have arisen during tune-up of the production line for the thermal processing of solid household waste by the method of burning in a vortical fluidized bed (principally, a new technology for Russia), and means of their solution are presented. Investigative studies are cited. __________ Translated from élektricheskie Stantsii, No. 6, pp. 20–26, August, 2006.     

High accuracy path tracking for vehicles in presence of sliding: Application to farm vehicle automatic guidance for agricultural tasks

When designing an accurate automated guidance system for vehicles, a major problem is sliding and pseudo-sliding effects. This is especially the case in agricultural applications, where five-centimetre accuracy with respect to the desired trajectory is required, although the vehicles are moving on slippery ground. It has been established that RTK GPS was a very suitable sensor to achieve automated guidance with such high precision: several control laws have been designed for vehicles equipped with this sensor, and provide the expected guidance accuracy as long as the vehicles do not slide. In previous work, further control developments have been proposed to take sliding into account: guidance accuracy in slippery environments has been shown to be preserved, except transiently at the beginning/end of curves. In this paper, the design of this control law is first recalled and discussed. A Model Predictive Control method is then applied in order to preserve accuracy of guidance even during these curvature transitions. Finally, the overall control scheme is implemented, and improvements with respect to previous guidance laws are demonstrated through full-scale experiments.     

Estimate of Landfill Settlements Due to Mechanical and Decompositional Processes

Approximate closed form solutions are developed for estimating the mechanical and decomposition settlement of landfills. The mechanical settlements are the immediate (primary) settlement and long term creep. The decomposition settlements are generated by mass loss and gas generation. Based on the approximate solution, the decomposition settlement can constitute a significant portion of the total settlement and can be in the same order as the mechanical settlements. Settlement remaining after landfill closure depends on the decomposition environment during filling. For an average decomposition environment, postoperation settlement can still be significant 20?years after completion of filling.     

Study of trace elements in coal and mining wastes and its significance in China

In the world energy about 26% of all was dedved from coal combustion. Nearly 80% of the electricity produced in China is generated from coal. Coal will play the most important role in the coming 50 years as the past century in China. However one consequentially of the mining and combustion of coal is the mobilization of trace elements, especially trace metals, which have environmental and human health significance. Information on concentrations and distributions of potentially toxic elements in coal, and information On the modes of occurrence of these elements and the relations of the minerals in coal can help to predict the behavior of the potentially toxic trace metals dudng cleaning, combustion, weathering, and leaching.