Investigation of the structure and properties of modified Armenian minerals for polymer-based composites

The results of investigation of the modification of the Armenian minerals with fluorine-containing oligomers show that a modified product appears when the mineral fillers are treated with fluoroalkanes. The product preserves the structure of the fillers with a “grafted” fluoroalkane layer in which chlorine atoms locate mainly over their periphery. The composite materials based on heterochained polymers and the modified fillers possess a stronger wear resistance and a low friction coefficient.     

改性膨润土对天然橡胶的力学性能影响研究

本文讨论了改性膨润土对天然橡胶的力学性能的影响，并同未改性膨润土及白炭黑作了比较。用Ｘ光衍射仪和红外光谱分析了膨润土改性前后的结构变化。     

膨润土尾矿作PVC塑料填料的研究

研究了膨润土尾矿的比表面积、添加量及偶联剂表面改性处理对其作为PVC塑料填料时的力学性能和流变性能的影响。结果表明,膨润土尾矿作填料的PVC试样,拉伸强度优于重质CaCO_3,为填料的试样,冲击强度和流动性能则有所下降。钛酸酯作偶联剂有利于提高填充试样的冲击强度。但对拉伸强度无明显效果。膨润土尾矿的添加量约20份时,试样的力学性能最佳。     

空心玻璃微珠复合聚氨酯泡沫的模塑成型收缩率

研究了用空心玻璃微珠复合聚氨酯泡沫塑料制成厚度不同、形状不同、结构不同的制品时模型成型的收缩率，以及在模塑成型过程中，熟化温度、熟化时间和熟化后在模具内保持的时间对模塑成型收缩率的影响。结果表明，制品模塑成型收缩率随着厚度的增加而增大；加入金属嵌件后可较大程度地限制制品收缩；当熟化温度高于100℃时，随着熟化温度的升高，制品收缩率增大。     

偶联剂对地砖用PVC填充材料相态结构和力学性能的影响

研究了钛酸酯类偶联剂和硅烷类偶联剂对钙矿、硅酸盐填充的PVC填允材料力学性能、相态结构、密度、热失重率及吸水伸长率和耐热阻燃性能的影响。结果表明,偶联剂可改善填充PVC的抗冲性能,降低其拉伸强度,扫描电镜分析表明,填料越细,分散越均匀,越易被PVC树脂所包覆,力学性能越好,研究得到了比重大、热失重率低、吸水伸长率小、阻燃耐烧灼性好的高填充PVC硬质塑料地板砖。     

Limestone filler cement in low w/c concrete: A rational use of energy

The effect of limestone filler (up to 20%) on the degree of hydration, the volume of hydration products, and the optimal replacement of limestone filler in cement pastes at different w/cm ratios (0.25-0.50) were investigated by using a quadratic statistical model. The results show an increase in the degree of hydration in very low w/cm ratio paste when the limestone filler content is increased. However, the largest volume of hydration products occurs for high w/cm ratio pastes, for which the available space also increases with the limestone filler content. Finally, for a given cement, the optimum limestone filler content for different w/cm ratios can be obtained by using the gel-space ratio concept.In addition, concrete mixtures (w/cm=0.30 and 0.34) were made to determine the compressive strength. The results have shown that concretes containing limestone filler cements present a small reduction of strength at 28 days improving the hydration of clinker particles in the system. The strength of concrete depends on the gel-space ratio, which takes into account all of the effects produced by limestone filler addition: the increase of the degree of hydration, the dilution, and the increase of the effective w/c ratio.     

Characteristics of selective adsorption using D-phenylalanine imprinted terpolymer beads

A D-Phenylalanine (Phe) imprinted terpolymer, Polyacrylonitrile-Poly(acrylic acid)-Poly(acryl amide) (Poly(AN-AA-AAm)) bead was prepared by the wet-phase inversion method. Acrylamide (AAm) and acrylic acid (AA) were used as the functional monomer and acrylonitrile (AN) was used as a physical cross linker. The characteristics of selective adsorption by the D-Phe imprinted terpolymer beads were investigated at high concentrations of Phe racemate solution, 1 g Phe/L, and 10 g Phe/L. The adsorption selectivity of the D-Phe imprinted terpolymer beads prepared by anin-situ implanting method reached 0.82 and 0.8 at 1.0 g and 10 g Phe/L racemate solution, respectively, and almost all of the adsorbed D-Phe and about 43% of the adsorbed L-Phe were desorbed by 4% acetic acid. The uptake capacities of the terpolymer beads were maintained for several repeated batches.     

连铸中间包绝热板用粘合剂研制

叙述了连铸中间包绝热板用粘合剂的合成方法，对其填充料的选择进行了分析，产品用于连铸中间包绝热板后，取得了较理想的效果。     

高分子量聚氯乙烯树脂增塑,填充体系的物理力学性能研究

本文研究聚合度及增塑剂、填充剂用量对高分子量聚氯乙烯（ＨＭＷＰＶＣ）树脂物理力学性能的影响规律，并将国内外ＨＭＷＰＶＣ树脂以及ＨＭＷＰＶＣ与通用型ＰＶＣ树脂进行了性能对比。结果表明，ＨＭＷＰＶＣ增塑、填充体系的拉什强度、撕裂强度冲击回弹性及压缩永久形变等物理力学性能均随聚合度的提高而有所增加，而且各项性能均优于通用型ＰＶＣ树脂，可有效地用作橡胶代用品。分子量相同的国内外ＨＭＷＰＶＣ树脂物理力学性能基本相同。但是，后者随着增塑剂用量的增加，弹性比前者有所提高；随着填充剂用量的增加，性能变化比前者缓慢．增加填充剂用量以降低制品的体积成本。笔者还时两者物理力学性能的差异与颗粒形态之间的关系进行了探讨。